MK2 SWE STUDY NOTES || with 100% Correct Answers.
What are the two Bi level maintenance categories correct answers Organizational, Dept
What are the three types of Maintenance correct answers Correct, Preventive, Alternative
What system groups similar Naval Engineering equipment into categories and assigns those
categories three-digit codes between 001 and 999? correct answers Ship Work Breakdown
Structure (SWBS)
What Navy publication provides technical guidance to Coast Guard personnel engaged in the
supervision, operation, and maintenance of Coast Guard ships and small boats? correct answers
NSTM
Which publication identifies the Naval Engineering Manual? correct answers COMDTINST
M9000.6
In any areas of conflict, which publication takes precedence over the NSTM? correct answers
Naval Engineering Manual
What electronic information system contains supply information for all parts listed in the Federal
Supply System? correct answers FEDLOG
Tag-out correct answers A prominent warning device, such as a danger tag and a means of
attachment.
Steps to fill out a danger tag correct answers 1. (A) Fill in System Component
2. (B) Fill in Date and Time
3. (C) Indicate position or conduction of item
4. (D) Sign the Tag
5. (E) Give serial no. in numerical order from danger tag index.
, 6. (F) Authorizing Officer signs
7. (G) Repair party activity signs (if applicable)
8. Place tag on equipment
9. (H) Person checking the tag signs
Which cutter or boat is NOt required to maintain two tag out logs correct answers WTGB
Maximum safe voltage for class 0 rubber gloves and color label correct answers 1,000 volts/ Red
Maximum safe voltage for class 1 rubber gloves and color label correct answers 7,500 volts/
White
Maximum safe voltage for class 2 rubber gloves and color label correct answers 17,500 volts/
Yellow
Maximum safe voltage for class 3 rubber gloves and color label correct answers 26,500 volts/
Green
What is the purpose for grounding power tools and equipment correct answers Proper grounding
can prevent lethal shocks by limiting voltages due to line surges of unintentional contact with
higher voltage lines
What are two conditions that must be satisfied for current to flow through a person correct
answers 1. The person must form part of a closed circuit in which current can flow.
2. Somewhere in the closed circuit there must be an electromotive force or a difference in
potential to cause current flow.
Definition of Conductor correct answers Materials that permit electrons to move freely
What are the two Bi level maintenance categories correct answers Organizational, Dept
What are the three types of Maintenance correct answers Correct, Preventive, Alternative
What system groups similar Naval Engineering equipment into categories and assigns those
categories three-digit codes between 001 and 999? correct answers Ship Work Breakdown
Structure (SWBS)
What Navy publication provides technical guidance to Coast Guard personnel engaged in the
supervision, operation, and maintenance of Coast Guard ships and small boats? correct answers
NSTM
Which publication identifies the Naval Engineering Manual? correct answers COMDTINST
M9000.6
In any areas of conflict, which publication takes precedence over the NSTM? correct answers
Naval Engineering Manual
What electronic information system contains supply information for all parts listed in the Federal
Supply System? correct answers FEDLOG
Tag-out correct answers A prominent warning device, such as a danger tag and a means of
attachment.
Steps to fill out a danger tag correct answers 1. (A) Fill in System Component
2. (B) Fill in Date and Time
3. (C) Indicate position or conduction of item
4. (D) Sign the Tag
5. (E) Give serial no. in numerical order from danger tag index.
, 6. (F) Authorizing Officer signs
7. (G) Repair party activity signs (if applicable)
8. Place tag on equipment
9. (H) Person checking the tag signs
Which cutter or boat is NOt required to maintain two tag out logs correct answers WTGB
Maximum safe voltage for class 0 rubber gloves and color label correct answers 1,000 volts/ Red
Maximum safe voltage for class 1 rubber gloves and color label correct answers 7,500 volts/
White
Maximum safe voltage for class 2 rubber gloves and color label correct answers 17,500 volts/
Yellow
Maximum safe voltage for class 3 rubber gloves and color label correct answers 26,500 volts/
Green
What is the purpose for grounding power tools and equipment correct answers Proper grounding
can prevent lethal shocks by limiting voltages due to line surges of unintentional contact with
higher voltage lines
What are two conditions that must be satisfied for current to flow through a person correct
answers 1. The person must form part of a closed circuit in which current can flow.
2. Somewhere in the closed circuit there must be an electromotive force or a difference in
potential to cause current flow.
Definition of Conductor correct answers Materials that permit electrons to move freely
