MAINE STATE INSPECTION CERTIFICATION
SCRIPT 2026 COMPLETE QUESTIONS AND
CORRECT ANSWERS
◉Stations licensed prior to ___ must have a lift, an inspection pit, or a
sufficient number and type of jacks and stands to safely raise and/or
examine all types of vehicles that the station is licensed to inspect.
Answer: January 1, 2007
◉Class A and E stations licensed on or after ___ must have a
functioning vehicle lift or properly installed inspection put. Answer:
January 1, 2007
◉A class D station must have a ___ bottle jack. Answer: 20 ton
◉A class E station must have a ___ tester that has been approved by
the Commissioner of the Maine Department of Environmental
Protection so long as statute requires the ___ test to be conducted
Answer: gas cap pressure
◉A class E station must have an approved ___that is capable of
reading monitor status and malfunction indicator light (MIL) status
of the vehicle being inspected. Answer: scan tool
, ◉Inspection stations are required to have a sufficient number and
type of ___ necessary, or their electronic equivalent, to conduct an
inspection on any vehicle the station is licensed to inspect. Such
manuals include, but are not limited to, the following: Answer:
reference guides
Tire guide listing standard and optional tire sizes current to within
two years;
Specification guide current to within two years;
Class A or E stations inspection vehicles between 10,001 and 26,000
pounds and ALL Class D stations must have a copy of the Federal
Motor Carrier Safety Regulations pertaining to equipment contained
in 49 Code of Federal Regulations Part 393.
◉An inspection station may be licensed to inspect more than ___
Answer: one classification of vehicle
◉All Class A and D inspection stations and technicians located in
Cumberland County shall also be licensed as a Class ___ station or
technician. Answer: E
SCRIPT 2026 COMPLETE QUESTIONS AND
CORRECT ANSWERS
◉Stations licensed prior to ___ must have a lift, an inspection pit, or a
sufficient number and type of jacks and stands to safely raise and/or
examine all types of vehicles that the station is licensed to inspect.
Answer: January 1, 2007
◉Class A and E stations licensed on or after ___ must have a
functioning vehicle lift or properly installed inspection put. Answer:
January 1, 2007
◉A class D station must have a ___ bottle jack. Answer: 20 ton
◉A class E station must have a ___ tester that has been approved by
the Commissioner of the Maine Department of Environmental
Protection so long as statute requires the ___ test to be conducted
Answer: gas cap pressure
◉A class E station must have an approved ___that is capable of
reading monitor status and malfunction indicator light (MIL) status
of the vehicle being inspected. Answer: scan tool
, ◉Inspection stations are required to have a sufficient number and
type of ___ necessary, or their electronic equivalent, to conduct an
inspection on any vehicle the station is licensed to inspect. Such
manuals include, but are not limited to, the following: Answer:
reference guides
Tire guide listing standard and optional tire sizes current to within
two years;
Specification guide current to within two years;
Class A or E stations inspection vehicles between 10,001 and 26,000
pounds and ALL Class D stations must have a copy of the Federal
Motor Carrier Safety Regulations pertaining to equipment contained
in 49 Code of Federal Regulations Part 393.
◉An inspection station may be licensed to inspect more than ___
Answer: one classification of vehicle
◉All Class A and D inspection stations and technicians located in
Cumberland County shall also be licensed as a Class ___ station or
technician. Answer: E
