MKC SWE STUDY GUIDE EXAM 2026
COMPLETE QUESTIONS WITH SOLUTIONS
GRADED A+
◉Oil simple reports to SFLC shall be provided and what form.
Answer: Electronic or hardcopy
◉A liquid with a flashpoint of what is not regulated by USPS as a
hazardous material and may be mailed. Answer: 200°F
◉What is the oil sample form?. Answer: DD2026
◉All historical data is erased by NOAP within how many day. If
samples are not received.. Answer: 240 days
◉What is the method by which data from prior samples are
averaged and used with laboratory results from the current oil
sample to find out if there are increasing levels of trace metals
pointing to abnormal internal wear?. Answer: Trend analysis
,◉What are the trend analysis levels?. Answer: 1 normal
2 may require re sampling
3 and 4 are more serious
◉Lead, titanium, 10, aluminum shavings and oil come from what.
Answer: Bearings
◉Molybdenum in oil comes from what. Answer: Piston rings
◉Nickel and oil comes from what. Answer: Valve or crankshaft
◉Iron and oil comes from we. Answer: Anti-friction bearings, cams,
shafts, oil, pumps, liners
◉Viscosity is a measure of what. Answer: The internal friction of the
oil
◉Filtration cannot remove what. Answer: Fuel dilution
◉What are the viscosity limits for thickening and dilution?. Answer:
40% thickness and 5% dilution
, ◉Use of what power is encouraged to reduce operating cost and
reduce engine operating hours. Answer: Commercial electric power
◉What shall happen when shore tie is not in use. Answer: All circuit
breaker shall be secured, shore side, and ship side, and the cable
shall be disconnected at both ends, cover ends to prevent moisture
◉What should be examined frequently for signs of arching or loose
connections?. Answer: Contacts
◉Frequent inspection shall be made to ensure what. Answer: That
no undo heating or plugs, receptacles, or cables exist
◉New copper nickel piping used to repair or replace copper nickel
piping, lost to erosion or corrosion damage within first 20 years of
service shall be what copper nickel alloy unless other mods are
provided. Answer: 70-30 copper nickel alloy
◉Who is responsible for inspection and maintenance of hoses and
expansion joints on cutters and boats?. Answer: The unit
◉Standard hoses are identified as standard and hose logs and shall
be scheduled for a replacement at intervals not to exceed how long.
Answer: Eight years
COMPLETE QUESTIONS WITH SOLUTIONS
GRADED A+
◉Oil simple reports to SFLC shall be provided and what form.
Answer: Electronic or hardcopy
◉A liquid with a flashpoint of what is not regulated by USPS as a
hazardous material and may be mailed. Answer: 200°F
◉What is the oil sample form?. Answer: DD2026
◉All historical data is erased by NOAP within how many day. If
samples are not received.. Answer: 240 days
◉What is the method by which data from prior samples are
averaged and used with laboratory results from the current oil
sample to find out if there are increasing levels of trace metals
pointing to abnormal internal wear?. Answer: Trend analysis
,◉What are the trend analysis levels?. Answer: 1 normal
2 may require re sampling
3 and 4 are more serious
◉Lead, titanium, 10, aluminum shavings and oil come from what.
Answer: Bearings
◉Molybdenum in oil comes from what. Answer: Piston rings
◉Nickel and oil comes from what. Answer: Valve or crankshaft
◉Iron and oil comes from we. Answer: Anti-friction bearings, cams,
shafts, oil, pumps, liners
◉Viscosity is a measure of what. Answer: The internal friction of the
oil
◉Filtration cannot remove what. Answer: Fuel dilution
◉What are the viscosity limits for thickening and dilution?. Answer:
40% thickness and 5% dilution
, ◉Use of what power is encouraged to reduce operating cost and
reduce engine operating hours. Answer: Commercial electric power
◉What shall happen when shore tie is not in use. Answer: All circuit
breaker shall be secured, shore side, and ship side, and the cable
shall be disconnected at both ends, cover ends to prevent moisture
◉What should be examined frequently for signs of arching or loose
connections?. Answer: Contacts
◉Frequent inspection shall be made to ensure what. Answer: That
no undo heating or plugs, receptacles, or cables exist
◉New copper nickel piping used to repair or replace copper nickel
piping, lost to erosion or corrosion damage within first 20 years of
service shall be what copper nickel alloy unless other mods are
provided. Answer: 70-30 copper nickel alloy
◉Who is responsible for inspection and maintenance of hoses and
expansion joints on cutters and boats?. Answer: The unit
◉Standard hoses are identified as standard and hose logs and shall
be scheduled for a replacement at intervals not to exceed how long.
Answer: Eight years
