ICA 2 PRELIM REVIEWER QUESTIONS AND ANSWERS RATED 100% CORRECT.

Who can best interpret Architectural drawings? - CORRECT ANSWER-Architect Who should sign architectural drawings? - CORRECT ANSWER-Architect You were commissioned to do a Master Plan. What should you do first? - CORRECT ANSWER-Survey the location Responsibilities of an Architect: When He/She conducts the checking of materials and works done it it in adherence with the specifications - CORRECT ANSWER-Full time supervision How often does the Architect-of-record visit the job site? - CORRECT ANSWER-As often as he/she wants Specifications should be clear and easy to understand. What must be avoided? - CORRECT ANSWER-Sentence with double meaning The record tests of materials and of concrete must be preserved after the completion of the project for a t least? - CORRECT ANSWER-5 years After a change of use (renovation)of the building, what should be secured? - CORRECT ANSWER-Certificate of occupancy A permit prior to the commencement of a project - CORRECT ANSWER-Building permit What are the qualifications of someone who wishes to take the licensure exam for architects? - CORRECT ANSWER-Filipino citizen, Graduate of Architecture, Submitted the necessary requirements to PRC, (ALL OF THE ABOVE) After how many days can a contractor stop work if the architect's approval for the change of work is delayed? - CORRECT ANSWER-15 days An outline specification enumerating the type trade names of materials to be used and finishes is known as - CORRECT ANSWER-Schedule of materials and finishes Under PD 957 and BP 220, how many units shall be the maximum number of row houses per block/cluster? - CORRECT ANSWER-20Under BP 220, the maximum length of a block is 400 meters. However, Block lengths exceeding 250 meters should be provided with an alley approximately ay midlength. How wide is the alley? - CORRECT ANSWER-2.00 meters Under BP 220. it shall have a width of 3.00 meters intended only to provide pedestrian access to property for socialized housing projects. It shall have a maximum length of 60 meters - CORRECT ANSWER-Pathwalk Under PD 957, what is the minimum lot frontage for row houses? - CORRECT ANSWER-4 Under BP220, what is the minimum lot frontage for socialized row houses? - CORRECT ANSWER-3.5 Meters Which of the following is not part of the RROW? - CORRECT ANSWER-Yard What is the minimum RROW access to an Interior lot? - CORRECT ANSWER-Verify Answer Space left in a lot between the building and the property line - CORRECT ANSWERYard For a RROW of 9.00 meters or more, the minimum width of the sidewalk on each side shall be? - CORRECT ANSWER-1.2m As per PD 1096, what is the minimum horizontal dimension of a court? - CORRECT ANSWER-2.00 m Minimum front setback for R-1 - CORRECT ANSWER-4.50 m Minimum side setback for R-1 - CORRECT ANSWER-2m Minimum rear setback for R-1 - CORRECT ANSWER-2.00 m Using the 1977 National Building Code, what is the minimum setback for R-1 - CORRECT ANSWER-3.0m What is the minimum front setback for R-4? - CORRECT ANSWER-4.5 Meters What is the minimum ceiling height for Habitable Rooms with Artificial Ventilation of a single-storey structure? - CORRECT ANSWER-2.4 Meters What is the minimum ceiling height for Habitable Rooms with Artificial Ventilation at the Second floor? - CORRECT ANSWER-2.40mWhat is the minimum ceiling height at the ground floor for Habitable Rooms with Natural Ventilation? - CORRECT ANSWER-2.70m Height of ceiling at 5th floor with Natural Ventilation? - CORRECT ANSWER-2.7 Meters What is the minimum dimension of a Kitchen? - CORRECT ANSWER-1.5 M x 2 M Width of Drop Curb? - CORRECT ANSWER-0.90m Maximum height of Spire, if made of combustible material, above the BHL? - CORRECT ANSWER-6 meters Maximum height of Spire, if made of incombustible material, above the BHL? - CORRECT ANSWER-Limited only by Structural Design Who prepares the Comprehensive Land Use of Plan? - CORRECT ANSWER-HLURB Who adopts the land use plan when it was already approved? - CORRECT ANSWERSangguniang Panglunsod Which will you least or NOT consider in making a Comprehensive Development Plan? - CORRECT ANSWER-Political/Institutional Which is NOT considered in a Master Development Plan? - CORRECT ANSWERBuilding Height What is meant by R3 in residential zone? - CORRECT ANSWER-High Density Housing Specifications contain? - CORRECT ANSWER-Quality of Materials What is the purpose of Bill of Materials? - CORRECT ANSWER-Reference on Cost Who is responsible for making/ producing Architectural Drawings? - CORRECT ANSWER-Architect What is not a Structural Plan? - CORRECT ANSWER-Schedule of beams Basic function of an open door? - CORRECT ANSWER-Means of access Allowable projection for the signage of a building that is NOT arcaded - CORRECT ANSWER-1.20 Minimum signage height of a building that is NOT arcaded - CORRECT ANSWER-3.0m Minimum signage height of a building that is NOT arcaded - CORRECT ANSWER-3.0mMinimum signage height of a building that is arcaded - CORRECT ANSWER-5 meters The minimum arcade height above the established sidewalk grade is - CORRECT ANSWER-3.0m Allowable projection for the signage of a building that is arcaded - CORRECT ANSWER-1.00 It is a bond that is an approved form of security furnished by the contractor as a guarantee to execute work in accordance with the terms of the contract - CORRECT ANSWER-Performance Bond In the construction industry, it is a person, firm or corporation that provides guarantee or undertakes an obligation to pay in the event of failure on the part of the Contractor to fulfil his part. - CORRECT ANSWER-Surety