EPA 608 Type II Exam Verified Questions
and Answers| Updated
When a new system has been assembled, the first thing to do is?
Pressurize the system with an inert gas & leak check.
After installation of a field-piped R-410A split heat pulp, the unit should first be?
Pressurized with nitrogen then leak checked.
The EPA regulations require that any appliances containing more than 50 pounds
of refrigerant (except for commercial & industrial process refrigeration) must be
repaired when the leak rate exceeds _________ of the charge per year?
15%
R-410A requires recovery tanks rated for at least?
400 psig
After refrigerant liquid has been recovered from a system, any remaining vapor
is?
Condensed by the recovery system.
, Your recovery/recycling machine has R-502 refrigerant in it. You now have to
recover refrigerant from a unit with R-22. What must be done before the R-22
refrigerant can be recovered/recycled?
Recover as much R-502 from the recovery unit as possible, change filter, &
evacuate.
In a refrigeration system with a TXV (or other type of throttling device), the
component directly following the condenser is the?
Receiver
When charging an R-410A system that uses a water-cooled condenser, you must
first charge with vapor to a pressure of at least________, before switching to
liquid charging.
120 psig
Recovered refrigerant may contain what?
1.) Acids
2.) Moisture
3.) Oils
Your recovery/recycling machine has R-22 refrigerant in it. You now have to
recover refrigerant from a unit with R-410A. What must be done before your
recovery unit can be used to recover R-410A?
1.) The recovery unit must be EPA certified for use with R-410A.
2.) The recovery tank must be designed for the pressure of R-410A.
and Answers| Updated
When a new system has been assembled, the first thing to do is?
Pressurize the system with an inert gas & leak check.
After installation of a field-piped R-410A split heat pulp, the unit should first be?
Pressurized with nitrogen then leak checked.
The EPA regulations require that any appliances containing more than 50 pounds
of refrigerant (except for commercial & industrial process refrigeration) must be
repaired when the leak rate exceeds _________ of the charge per year?
15%
R-410A requires recovery tanks rated for at least?
400 psig
After refrigerant liquid has been recovered from a system, any remaining vapor
is?
Condensed by the recovery system.
, Your recovery/recycling machine has R-502 refrigerant in it. You now have to
recover refrigerant from a unit with R-22. What must be done before the R-22
refrigerant can be recovered/recycled?
Recover as much R-502 from the recovery unit as possible, change filter, &
evacuate.
In a refrigeration system with a TXV (or other type of throttling device), the
component directly following the condenser is the?
Receiver
When charging an R-410A system that uses a water-cooled condenser, you must
first charge with vapor to a pressure of at least________, before switching to
liquid charging.
120 psig
Recovered refrigerant may contain what?
1.) Acids
2.) Moisture
3.) Oils
Your recovery/recycling machine has R-22 refrigerant in it. You now have to
recover refrigerant from a unit with R-410A. What must be done before your
recovery unit can be used to recover R-410A?
1.) The recovery unit must be EPA certified for use with R-410A.
2.) The recovery tank must be designed for the pressure of R-410A.
