1|Page
MKC SWE EXAM LATEST 2026-2027 ACTUAL EXAM WITH COMPLETE
QUESTIONS AND CORRECT DETAILED ANSWERS (100% VERIFIED
ANSWERS) |ALREADY GRADED A+| ||PROFESSOR VERIFIED||
||BRANDNEW!!!||
What person shall perform external inspection of all wire rope at
least quarterly and external inspections of all general purpose
lifting equipment wire rope semi annually - ANSWER-They
qualified person
If a wire has been idle for more than blank days, a quarterly
inspection shall be conducted - ANSWER-30 days
When reinstalling wire rope that has been removed for inspection,
it shall be installed in the same direction it was removed. The
practice of blank is not approved. - ANSWER-Swapping ends
How should wire roast be cleaned before lubrication in order to
reduce the amount of residual contaminate forced between the
wires - ANSWER-Hand cleaned
,2|Page
After use of solvent, wire rope shall be what to ensure the solvent
is removed - ANSWER-Pressure washed
How often should wire ropes be pressure lubricated - ANSWER-
Annually
Galvanized wire rope, Shelby, unshipped and pressure lubricated
how often - ANSWER-Five years
Before placing wire open service, you must do what - ANSWER-
Inspect and pressure lubricate
What can lead to premature wire rope where in failure? -
ANSWER-Improperly sized sheaves
And most lifting application cases, the minimum factor of safety
shall be what, for boat Davits the minimum shall be what -
ANSWER-5.0, and 6.0 for boat debits
TCTO - ANSWER-Technical Change Training Order
,3|Page
Non-Self Righting Small Boats less than 65 feet in length for -
ANSWER-Changes that create more than a 0.002 ft change in the
center of gravity in any direction (vertical, longitudal or transverse)
or net weight changes of more than 1/5 of 1% of the full load
displacement
All other Assets require TCTO for - ANSWER-Changes that
create more than a 0.001 ft change in center of gravity (vertical,
long, trans) or net weight changes of more than 1/20 of 1% of the
full load displacement require TCTO.
Weight Change Threshold - ANSWER-1/5 of 1% of full load
displacement for small boats.
TCTO Requirement for Other Assets - ANSWER-0.001 ft center of
gravity change triggers TCTO.
Changes to hull structure, space allocation, watertight integrity or
compartmentation require - ANSWER-TCTO
, 4|Page
Change to any system that affects spare parts allowance require -
ANSWER-TCTO
Fluid or Paint System Changes require - ANSWER-TCTO
Changes that require Electromagnetic Compatibility EMC or
TEMPEST Inspection require - ANSWER-TCTO
Form fit or function changes require - ANSWER-TCTO
Changes in software MODS require - ANSWER-TCTO
All cutter and boats operating machine machinery, Shelby
inspected how often - ANSWER-Every hour and reading shall be
recorded
How often do cutters equipped with video and electronic control
systems that monitor space is for fire and flooding need to be
inspected - ANSWER-Every 4 hours
MKC SWE EXAM LATEST 2026-2027 ACTUAL EXAM WITH COMPLETE
QUESTIONS AND CORRECT DETAILED ANSWERS (100% VERIFIED
ANSWERS) |ALREADY GRADED A+| ||PROFESSOR VERIFIED||
||BRANDNEW!!!||
What person shall perform external inspection of all wire rope at
least quarterly and external inspections of all general purpose
lifting equipment wire rope semi annually - ANSWER-They
qualified person
If a wire has been idle for more than blank days, a quarterly
inspection shall be conducted - ANSWER-30 days
When reinstalling wire rope that has been removed for inspection,
it shall be installed in the same direction it was removed. The
practice of blank is not approved. - ANSWER-Swapping ends
How should wire roast be cleaned before lubrication in order to
reduce the amount of residual contaminate forced between the
wires - ANSWER-Hand cleaned
,2|Page
After use of solvent, wire rope shall be what to ensure the solvent
is removed - ANSWER-Pressure washed
How often should wire ropes be pressure lubricated - ANSWER-
Annually
Galvanized wire rope, Shelby, unshipped and pressure lubricated
how often - ANSWER-Five years
Before placing wire open service, you must do what - ANSWER-
Inspect and pressure lubricate
What can lead to premature wire rope where in failure? -
ANSWER-Improperly sized sheaves
And most lifting application cases, the minimum factor of safety
shall be what, for boat Davits the minimum shall be what -
ANSWER-5.0, and 6.0 for boat debits
TCTO - ANSWER-Technical Change Training Order
,3|Page
Non-Self Righting Small Boats less than 65 feet in length for -
ANSWER-Changes that create more than a 0.002 ft change in the
center of gravity in any direction (vertical, longitudal or transverse)
or net weight changes of more than 1/5 of 1% of the full load
displacement
All other Assets require TCTO for - ANSWER-Changes that
create more than a 0.001 ft change in center of gravity (vertical,
long, trans) or net weight changes of more than 1/20 of 1% of the
full load displacement require TCTO.
Weight Change Threshold - ANSWER-1/5 of 1% of full load
displacement for small boats.
TCTO Requirement for Other Assets - ANSWER-0.001 ft center of
gravity change triggers TCTO.
Changes to hull structure, space allocation, watertight integrity or
compartmentation require - ANSWER-TCTO
, 4|Page
Change to any system that affects spare parts allowance require -
ANSWER-TCTO
Fluid or Paint System Changes require - ANSWER-TCTO
Changes that require Electromagnetic Compatibility EMC or
TEMPEST Inspection require - ANSWER-TCTO
Form fit or function changes require - ANSWER-TCTO
Changes in software MODS require - ANSWER-TCTO
All cutter and boats operating machine machinery, Shelby
inspected how often - ANSWER-Every hour and reading shall be
recorded
How often do cutters equipped with video and electronic control
systems that monitor space is for fire and flooding need to be
inspected - ANSWER-Every 4 hours
