FSE-215 MIDTERM QUESTIONS WITH VERIFIED
ACCURATE ANSWERS
Seamless copper deposit - Answers - In which of these methods of producing a copper
casket is the molds of a casket submerged in a copper ionic solution; thereby allowing
the creation of a casket within the molds of the casket? Later, the mold is broken away,
leaving the casket for finishing.
48 ounce bronze - Answers - Your client family tells you at their home that they want the
best metal casket that you sell. You immediately tell them that the ultimate casket in
your inventory is a _______________.
Steel - Answers - Which of these casket metals is most likely to receive galvanizing?
Steel - Answers - You observe that your deceased mother-in-law's casket has the words
"16 gauge" written on the base molding of the foot end of the casket. You immediately
draw the conclusion that her casket is made from what material?
Cast bronze - Answers - Which of these bronze casket types was made by molten
bronze, poured into a mold?
300 series - Answers - Your casket supplier offers two types of stainless steel, namely
300 series and 400 series. You want the better of the two. Which one is the better?
Zinc - Answers - If one galvanizes a metal, a coating of _____ is generally applied to the
metal
Rolled into sheets - Answers - The term "wrought" means-
Iron - Answers - "Extreme oxidation" would be an applicable term for which one of these
casket metals:
Cast bronze - Answers - Which of these bronze caskets is apt to be the heaviest type?
The ends of the casket, just above the ogee - Answers - A "fishtail" would be found on
what part of a casket?
On the bottom of the casket - Answers - Where would one find "stiffeners"?
Ogee flange - Answers - The underside of the ogee would be called the _______.
Top body molding and ogee - Answers - If a casket has a gasket, the gasket will be
"sandwiched" between the _____ & ______.
ACCURATE ANSWERS
Seamless copper deposit - Answers - In which of these methods of producing a copper
casket is the molds of a casket submerged in a copper ionic solution; thereby allowing
the creation of a casket within the molds of the casket? Later, the mold is broken away,
leaving the casket for finishing.
48 ounce bronze - Answers - Your client family tells you at their home that they want the
best metal casket that you sell. You immediately tell them that the ultimate casket in
your inventory is a _______________.
Steel - Answers - Which of these casket metals is most likely to receive galvanizing?
Steel - Answers - You observe that your deceased mother-in-law's casket has the words
"16 gauge" written on the base molding of the foot end of the casket. You immediately
draw the conclusion that her casket is made from what material?
Cast bronze - Answers - Which of these bronze casket types was made by molten
bronze, poured into a mold?
300 series - Answers - Your casket supplier offers two types of stainless steel, namely
300 series and 400 series. You want the better of the two. Which one is the better?
Zinc - Answers - If one galvanizes a metal, a coating of _____ is generally applied to the
metal
Rolled into sheets - Answers - The term "wrought" means-
Iron - Answers - "Extreme oxidation" would be an applicable term for which one of these
casket metals:
Cast bronze - Answers - Which of these bronze caskets is apt to be the heaviest type?
The ends of the casket, just above the ogee - Answers - A "fishtail" would be found on
what part of a casket?
On the bottom of the casket - Answers - Where would one find "stiffeners"?
Ogee flange - Answers - The underside of the ogee would be called the _______.
Top body molding and ogee - Answers - If a casket has a gasket, the gasket will be
"sandwiched" between the _____ & ______.
