Year 3 IEC FINAL Review 2026
Exam Questions and Verified
Answers | Already Graded A+
___ is a type of overload relay used in a motor start.
a. Melting allow
b. Bimetallic
c. Magnetic
,d. All of these - 🧠 ANSWER ✔✔All of these
A melting allow overload in a magnetic motor starter ____.
Select one:
a. actuates when excessive motor circuit current is present and opens only
the affected motor circuit power contacts on the starter
b. must be replaced after it operates
c. can be reset immediately after it operates
d. actuates when excessive motor circuit current is present and opens the
control circuit to de-energize the coil
e. actuates when excessive control circuit current is present and opens the
control circuit to de-energize the coil - 🧠 ANSWER ✔✔actuates when
excessive motor circuit current is present and opens the control circuit to
de-energize the coil
A 240-volt, 3Φ motor would require a starter with a minimum of ___ power
pole(s) to open the circuit.
Select one:
,a. 3
b. 1
c. 2 - 🧠 ANSWER ✔✔3
Refer to Figure 321.13 Symbol S is a ___.
Select one:
a. circuit interrupter (or breaker)
b. disconnect (or safety switch)
c. circuit breaker with thermal OLs
d. circuit breaker with magnetic OLs
e. circuit breaker with thermal and magnetic OLs - 🧠 ANSWER
✔✔disconnect (or safety switch)
Inherent motor protection devices are built into the motor and are reset
___.
Select one:
COPYRIGHT©NINJANERD 2025/2026. YEAR PUBLISHED 2026. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY
STATEMENT. ALL RIGHTS RESERVED
3
, a. manually
b. automatically - 🧠 ANSWER ✔✔automatically
Inherent motor protection devices are built into the ___ and are reset
automatically.
Select one:
a. motor
b. starter - 🧠 ANSWER ✔✔motor
When light strings are utilized on a construction site, empty sockets or
sockets with shattered lamps should be replaced ___ after being reported.
Select one:
a. before the next work shift
b. immediately
c. within 72 hours
d. within 24 hours - 🧠 ANSWER ✔✔immediately
Exam Questions and Verified
Answers | Already Graded A+
___ is a type of overload relay used in a motor start.
a. Melting allow
b. Bimetallic
c. Magnetic
,d. All of these - 🧠 ANSWER ✔✔All of these
A melting allow overload in a magnetic motor starter ____.
Select one:
a. actuates when excessive motor circuit current is present and opens only
the affected motor circuit power contacts on the starter
b. must be replaced after it operates
c. can be reset immediately after it operates
d. actuates when excessive motor circuit current is present and opens the
control circuit to de-energize the coil
e. actuates when excessive control circuit current is present and opens the
control circuit to de-energize the coil - 🧠 ANSWER ✔✔actuates when
excessive motor circuit current is present and opens the control circuit to
de-energize the coil
A 240-volt, 3Φ motor would require a starter with a minimum of ___ power
pole(s) to open the circuit.
Select one:
,a. 3
b. 1
c. 2 - 🧠 ANSWER ✔✔3
Refer to Figure 321.13 Symbol S is a ___.
Select one:
a. circuit interrupter (or breaker)
b. disconnect (or safety switch)
c. circuit breaker with thermal OLs
d. circuit breaker with magnetic OLs
e. circuit breaker with thermal and magnetic OLs - 🧠 ANSWER
✔✔disconnect (or safety switch)
Inherent motor protection devices are built into the motor and are reset
___.
Select one:
COPYRIGHT©NINJANERD 2025/2026. YEAR PUBLISHED 2026. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY
STATEMENT. ALL RIGHTS RESERVED
3
, a. manually
b. automatically - 🧠 ANSWER ✔✔automatically
Inherent motor protection devices are built into the ___ and are reset
automatically.
Select one:
a. motor
b. starter - 🧠 ANSWER ✔✔motor
When light strings are utilized on a construction site, empty sockets or
sockets with shattered lamps should be replaced ___ after being reported.
Select one:
a. before the next work shift
b. immediately
c. within 72 hours
d. within 24 hours - 🧠 ANSWER ✔✔immediately
