CLCP Study Guide Part 2 2026
Exam Questions and Answers |
100% Solved
What is the most important criterion to identify in a building automation
system (BAS)? - 🧠ANSWER ✔✔What is the intent of the BAS
What is building automation integration? - 🧠ANSWER ✔✔Integration that
provides communication and coordinated triggers between each system
MSI consultants can be an LCSI. - 🧠ANSWER ✔✔true
,Specifying integration is important because _____. - 🧠ANSWER
✔✔Integrators will ensure that a control system is installed and
programmed correctly
Integrators may be overlooked during project bidding
Integration is essential for complex controls projects
What division is lighting controls commonly specified under? - 🧠ANSWER
✔✔Division 26
A _____ is a document used to identify devices and triggers in a BAS. -
🧠ANSWER ✔✔Sequence of Operations
What division is a BAS always specified under? - 🧠ANSWER ✔✔There is
no single division that it is specified under
A(n) _____ is an interface that acts as a central point of contact for various
devices. - 🧠ANSWER ✔✔Field controller
When should you consider using an LCSI for a lighting control system
project? - 🧠ANSWER ✔✔Whenever DMX is specified
Whenever an open protocol and a proprietary protocol are used together
Whenever the system has multiple manufacturers
,Historically, integration of lighting control systems has been a part of BAS
design since the 1980s. - 🧠ANSWER ✔✔True
Toplighting describes daylighting using _____. - 🧠ANSWER ✔✔Skylights
and similar ceiling aperture
Sidelighting describes daylighting using _____. - 🧠ANSWER ✔✔Windows
and similar wall apertures
In spaces where critical stationary tasks are performed, to avoid glare,
daylight should be distributed as both uniform and highly _____. -
🧠ANSWER ✔✔Diffuse
Daylight control and daylight harvesting control are two different things. -
🧠ANSWER ✔✔True
Daylight-responsive lighting control is primarily _____ control strategy. -
🧠ANSWER ✔✔An automatic
The purpose of daylight-responsive lighting control is to save energy by
reducing _____ in some proportion to an increase in _____ in a space. -
🧠ANSWER ✔✔Electric light levels ; daylight levels
3
COPYRIGHT©JOSHCLAY 2025/2026. YEAR PUBLISHED 2026. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY
STATEMENT. ALL RIGHTS RESERVED
, All daylight-responsive lighting control systems require a(n) ____________.
- 🧠ANSWER ✔✔Light sensor
Daylight harvesting can be effective in virtually any facility where _____. -
🧠ANSWER ✔✔Ample daylight is present
Which of the following control methods is most likely to be inconspicuous to
users in an open office, and therefore accepted? - 🧠ANSWER
✔✔Continuous dimming
Closed loop systems respond to _____. - 🧠ANSWER ✔✔Combined electric
light and daylight level reflected from the task surface
Closed loop systems are often considered better suited to applications with
___________. - 🧠ANSWER ✔✔Spaces with frequently changing lighting
conditions
Which of the following is a hazard to performance of closed loop systems?
- 🧠ANSWER ✔✔Direct view of light emission from indirect luminaires
In open loop systems, photosensors are typically placed at or near ____. -
🧠ANSWER ✔✔A daylight aperture or outside the building
Exam Questions and Answers |
100% Solved
What is the most important criterion to identify in a building automation
system (BAS)? - 🧠ANSWER ✔✔What is the intent of the BAS
What is building automation integration? - 🧠ANSWER ✔✔Integration that
provides communication and coordinated triggers between each system
MSI consultants can be an LCSI. - 🧠ANSWER ✔✔true
,Specifying integration is important because _____. - 🧠ANSWER
✔✔Integrators will ensure that a control system is installed and
programmed correctly
Integrators may be overlooked during project bidding
Integration is essential for complex controls projects
What division is lighting controls commonly specified under? - 🧠ANSWER
✔✔Division 26
A _____ is a document used to identify devices and triggers in a BAS. -
🧠ANSWER ✔✔Sequence of Operations
What division is a BAS always specified under? - 🧠ANSWER ✔✔There is
no single division that it is specified under
A(n) _____ is an interface that acts as a central point of contact for various
devices. - 🧠ANSWER ✔✔Field controller
When should you consider using an LCSI for a lighting control system
project? - 🧠ANSWER ✔✔Whenever DMX is specified
Whenever an open protocol and a proprietary protocol are used together
Whenever the system has multiple manufacturers
,Historically, integration of lighting control systems has been a part of BAS
design since the 1980s. - 🧠ANSWER ✔✔True
Toplighting describes daylighting using _____. - 🧠ANSWER ✔✔Skylights
and similar ceiling aperture
Sidelighting describes daylighting using _____. - 🧠ANSWER ✔✔Windows
and similar wall apertures
In spaces where critical stationary tasks are performed, to avoid glare,
daylight should be distributed as both uniform and highly _____. -
🧠ANSWER ✔✔Diffuse
Daylight control and daylight harvesting control are two different things. -
🧠ANSWER ✔✔True
Daylight-responsive lighting control is primarily _____ control strategy. -
🧠ANSWER ✔✔An automatic
The purpose of daylight-responsive lighting control is to save energy by
reducing _____ in some proportion to an increase in _____ in a space. -
🧠ANSWER ✔✔Electric light levels ; daylight levels
3
COPYRIGHT©JOSHCLAY 2025/2026. YEAR PUBLISHED 2026. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY
STATEMENT. ALL RIGHTS RESERVED
, All daylight-responsive lighting control systems require a(n) ____________.
- 🧠ANSWER ✔✔Light sensor
Daylight harvesting can be effective in virtually any facility where _____. -
🧠ANSWER ✔✔Ample daylight is present
Which of the following control methods is most likely to be inconspicuous to
users in an open office, and therefore accepted? - 🧠ANSWER
✔✔Continuous dimming
Closed loop systems respond to _____. - 🧠ANSWER ✔✔Combined electric
light and daylight level reflected from the task surface
Closed loop systems are often considered better suited to applications with
___________. - 🧠ANSWER ✔✔Spaces with frequently changing lighting
conditions
Which of the following is a hazard to performance of closed loop systems?
- 🧠ANSWER ✔✔Direct view of light emission from indirect luminaires
In open loop systems, photosensors are typically placed at or near ____. -
🧠ANSWER ✔✔A daylight aperture or outside the building
