CCHT ACTUAL PRACTICE EXAM || MOST RECENT
EXAM ACTUAL COMPLETE REAL EXAM
QUESTIONS AND CORRECT ANSWERS (VERIFIED
ANSWERS) ALREADY GRADED A+ | GUARANTEED
SUCCESS!! NEWEST EXAM | JUST RELEASED!!
Vitamin B12
All of the following are phosphate binders except:
numbness and tingling
All of the following may be signs and symptoms of an infected access except:
The absence of disease producing organisms
Asepsis is defined as
1,385 mL/hr
Based on Mrs Smith's total amount of fluid to be removed, what is the
ultrafiltration rate per hour (mL/hr) for her 4 hour treatment?
,Discard the needle
Before a hemodialysis treatment, the technician removes the cap from the fistula
needle and accidentally touches the chair with the tip of the needle. Which of
these actions
should the technician take first?
Hemolysis
Dialysate that is too hot will cause
Weight at which the patient has no edema or fluid in the lungs and BP is normal
Dry weight is defined as the
Disconnection of the bloodline
During a hemodialysis treatment the technician responds to a low venous
pressure alarm. The most likely cause for this alarm is:
Blood
Biohazardous waste includes any material exposed to:
Diffusion
Decreasing the patient's prescribed blood flow rate affects the rate of
Stop the pump
During a hemodialysis treatment, a patient's venous needle infiltrates. Which of
these actions should the dialysis technician take first?
,Between 7.0 and 7.4
Dialysate pH should be:
Clamp the venous line
During hemodialysis, the air detector on Ms. Foster's machine alarms and foam is
visible in the venous drop chamber. The immediate action of the dialysis
technician should be to:
How have you been since your last dialysis treatment?
During predialysis data collection, it would be best for the technician to ask the
patient which of these questions?
Take the patient's temperature
During the hemodialysis treatment, a patient complains of feeling chilled. In
addition to getting the patient a blanket, which of these actions should the
technician take?
Notify the equipment technician
During the set up of a hemodialysis machine, the alarm test for conductivity fails.
Which of these actions should the dialysis technician take?
Indicators of the adequacy of the renal replacement therapy
ESRD specific tests such as BUN, Creatinine, and URR are
, Ultrafiltration
Excess fluid is forced out of the blood and into the dialysate during dialysis by
which principle
Percent rejection
Feed conductivity- product conductivity divided by x 100 is the formula
calculation of
The ultrafiltration rate
Fluid to be removed divided by the treatment time tells us
Inadequate dialyzer priming
Germicide rebound occurs due to:
Anaphylaxis (severe allergic reaction)
Hives, itching, tightness of the chest and respiratory distress may be signs and
symptoms of:
Cardiac arrest
Hyperkalemia can lead to
Hemoglobin
If the extracorporeal circuit clots and it must be discarded, it would be most
important to monitor the patient's serum level of:
EXAM ACTUAL COMPLETE REAL EXAM
QUESTIONS AND CORRECT ANSWERS (VERIFIED
ANSWERS) ALREADY GRADED A+ | GUARANTEED
SUCCESS!! NEWEST EXAM | JUST RELEASED!!
Vitamin B12
All of the following are phosphate binders except:
numbness and tingling
All of the following may be signs and symptoms of an infected access except:
The absence of disease producing organisms
Asepsis is defined as
1,385 mL/hr
Based on Mrs Smith's total amount of fluid to be removed, what is the
ultrafiltration rate per hour (mL/hr) for her 4 hour treatment?
,Discard the needle
Before a hemodialysis treatment, the technician removes the cap from the fistula
needle and accidentally touches the chair with the tip of the needle. Which of
these actions
should the technician take first?
Hemolysis
Dialysate that is too hot will cause
Weight at which the patient has no edema or fluid in the lungs and BP is normal
Dry weight is defined as the
Disconnection of the bloodline
During a hemodialysis treatment the technician responds to a low venous
pressure alarm. The most likely cause for this alarm is:
Blood
Biohazardous waste includes any material exposed to:
Diffusion
Decreasing the patient's prescribed blood flow rate affects the rate of
Stop the pump
During a hemodialysis treatment, a patient's venous needle infiltrates. Which of
these actions should the dialysis technician take first?
,Between 7.0 and 7.4
Dialysate pH should be:
Clamp the venous line
During hemodialysis, the air detector on Ms. Foster's machine alarms and foam is
visible in the venous drop chamber. The immediate action of the dialysis
technician should be to:
How have you been since your last dialysis treatment?
During predialysis data collection, it would be best for the technician to ask the
patient which of these questions?
Take the patient's temperature
During the hemodialysis treatment, a patient complains of feeling chilled. In
addition to getting the patient a blanket, which of these actions should the
technician take?
Notify the equipment technician
During the set up of a hemodialysis machine, the alarm test for conductivity fails.
Which of these actions should the dialysis technician take?
Indicators of the adequacy of the renal replacement therapy
ESRD specific tests such as BUN, Creatinine, and URR are
, Ultrafiltration
Excess fluid is forced out of the blood and into the dialysate during dialysis by
which principle
Percent rejection
Feed conductivity- product conductivity divided by x 100 is the formula
calculation of
The ultrafiltration rate
Fluid to be removed divided by the treatment time tells us
Inadequate dialyzer priming
Germicide rebound occurs due to:
Anaphylaxis (severe allergic reaction)
Hives, itching, tightness of the chest and respiratory distress may be signs and
symptoms of:
Cardiac arrest
Hyperkalemia can lead to
Hemoglobin
If the extracorporeal circuit clots and it must be discarded, it would be most
important to monitor the patient's serum level of:
