Mold Assessment Technician Exam || Most Recent Exam
2026-2027 Actual Complete Real Exam Questions And
Correct Answers (Verified Answers) Already Graded
A+ | Guaranteed Success!! Newest Exam | Just
Released!!
A mold assessor is collecting spore trap samples, assume a
flow of 15 liters per minute(LPM). You run the air sampling
pump for 5 minutes. What's the total volume in liters using the
formula = Flow Rate x Time (V=FR x T)? - ANSWER -75 liters
A mold assessor is collecting mold samples on a filter media,
assuming a flow rate of 28 liters per minute (lpm). They run the
air sampling pump for 3 minutes. What is the total volume in
liters using the formula, Flow rate times time (V=FRxT) -
ANSWER -84 Liters
Mold assessor could use what to indicate that a building has a
potential for mold growth? - ANSWER -Condensation on the
inside of window High humidity levels
The mold assessment consultant or mold assessment
technician write a________for the client? - ANSWER -Mold
Assessment Report
The mold assessment consultant prepares a mold management
plan for the client to _______ indoor mold. - ANSWER -Prevent
and control
,A mold assessment consultant can write a mold assessment
report, mold management plan, mold clearance and _________
(which is needed to write the mold work plan by the MRC -
ANSWER -Mold Protocol
The mold remediation contractor (MRC) write the mold ______
which may have standard operating procedures. - ANSWER -
Work Plan
The MRC must give the work plan to the client how far in
advance prior to the start of work, specific instructions also
called standard operating procedures (SOP) for mold removal -
ANSWER -One calander day
The MAC, MAT and MRC provide the _______ to the client at
least 1 calendar day before the project begins. - ANSWER -
Consumer of mold information sheet (CMIS)
The MRC and MAC provide the certificate of mold damage
remediation (CMDR) after the project is done. with in
_____calendar days? - ANSWER -10
Any airborne material such as mold, spores, hyphea, and
mycotoxins called airborne biological contaminants. - ANSWER
-Bioaerosols
samples that are taken on some growth media and
subsequently incubated for mold propagules (spores and
, Hyphal fragments) to germinate and form colonies. - ANSWER -
Viable air samples
samples that are taken on some sticky media or on a filter
membrane or tape subsequently examined directly under a
microscope for enumeration and identification without
culturing. - ANSWER -Non-viable air samples
Types of non-viable samples - ANSWER -spore trap Allergenco
D, Zefon AirOCell, and tape lift.
Suspension of airborne particles that contain living organisms
or were released from living organisms - ANSWER -Bioaerosols
(Mold, Bacteria, Legionella, Allergens and Endotoxins
for spore traps laboratories analyze and count up the different
species of mold and spores. What is this called? - ANSWER -
Quantitative non-viable result
Samples taken with an Anderson sampler or bio-cassette,
results will be grown (cultured or incubated) gives you a? -
ANSWER -Qualitative result
Mold samples, building materials containing mold, and HEPA
vacuum bag waste should be? - ANSWER -Placed in tightly
sealed bags
Category 1, Sanitary water from pipe and melting ice or snow -
ANSWER -Clean Water
2026-2027 Actual Complete Real Exam Questions And
Correct Answers (Verified Answers) Already Graded
A+ | Guaranteed Success!! Newest Exam | Just
Released!!
A mold assessor is collecting spore trap samples, assume a
flow of 15 liters per minute(LPM). You run the air sampling
pump for 5 minutes. What's the total volume in liters using the
formula = Flow Rate x Time (V=FR x T)? - ANSWER -75 liters
A mold assessor is collecting mold samples on a filter media,
assuming a flow rate of 28 liters per minute (lpm). They run the
air sampling pump for 3 minutes. What is the total volume in
liters using the formula, Flow rate times time (V=FRxT) -
ANSWER -84 Liters
Mold assessor could use what to indicate that a building has a
potential for mold growth? - ANSWER -Condensation on the
inside of window High humidity levels
The mold assessment consultant or mold assessment
technician write a________for the client? - ANSWER -Mold
Assessment Report
The mold assessment consultant prepares a mold management
plan for the client to _______ indoor mold. - ANSWER -Prevent
and control
,A mold assessment consultant can write a mold assessment
report, mold management plan, mold clearance and _________
(which is needed to write the mold work plan by the MRC -
ANSWER -Mold Protocol
The mold remediation contractor (MRC) write the mold ______
which may have standard operating procedures. - ANSWER -
Work Plan
The MRC must give the work plan to the client how far in
advance prior to the start of work, specific instructions also
called standard operating procedures (SOP) for mold removal -
ANSWER -One calander day
The MAC, MAT and MRC provide the _______ to the client at
least 1 calendar day before the project begins. - ANSWER -
Consumer of mold information sheet (CMIS)
The MRC and MAC provide the certificate of mold damage
remediation (CMDR) after the project is done. with in
_____calendar days? - ANSWER -10
Any airborne material such as mold, spores, hyphea, and
mycotoxins called airborne biological contaminants. - ANSWER
-Bioaerosols
samples that are taken on some growth media and
subsequently incubated for mold propagules (spores and
, Hyphal fragments) to germinate and form colonies. - ANSWER -
Viable air samples
samples that are taken on some sticky media or on a filter
membrane or tape subsequently examined directly under a
microscope for enumeration and identification without
culturing. - ANSWER -Non-viable air samples
Types of non-viable samples - ANSWER -spore trap Allergenco
D, Zefon AirOCell, and tape lift.
Suspension of airborne particles that contain living organisms
or were released from living organisms - ANSWER -Bioaerosols
(Mold, Bacteria, Legionella, Allergens and Endotoxins
for spore traps laboratories analyze and count up the different
species of mold and spores. What is this called? - ANSWER -
Quantitative non-viable result
Samples taken with an Anderson sampler or bio-cassette,
results will be grown (cultured or incubated) gives you a? -
ANSWER -Qualitative result
Mold samples, building materials containing mold, and HEPA
vacuum bag waste should be? - ANSWER -Placed in tightly
sealed bags
Category 1, Sanitary water from pipe and melting ice or snow -
ANSWER -Clean Water
