Pump OPS EXAM || MOST RECENT EXAM 2026-2027
ACTUAL COMPLETE REAL EXAM QUESTIONS AND
CORRECT ANSWERS (VERIFIED ANSWERS) ALREADY
GRADED A+ | GUARANTEED SUCCESS!! NEWEST
EXAM | JUST RELEASED!!
the Bourdon tube gauge is susceptible to its own problems -
ANSWER -if a noxxle is shut off to fast water hammer may
cause damage to the gauge if temps are below freezing water
inside gauge may cause permanent formation of the tube.
2%-3% erros is common
water supplied by an engine may come from a number of
different resources
such as - ANSWER -
engines tank
static water sources (ponds,
lakes etc)
fire
hydrant
or come from another engine such as in a
relay operation
NFPA standard states that the minimum pump capacity
for pumper fire
,apparatus shall be________ Gallons per minute -
ANSWER -750 GPM
fire pumps are rated at draft thru ______ ft of hard suction hose
and strainer with ______ ft lift. This testing applied to pumps up
to and including _______
GPM - ANSWER -20
10
1500
for _______ GPM pumps the required lift height drops to _____
FT and requires the use of _______ _______ ________ each
with appropriate strainers.
for 2000 GPM pumps or larger the lift height drops to ______ Ft
- ANSWER 1750
8 ft
double suction hose
6 ft
pump hour meter - ANSWER -total time pump has been operated
remote engine gauges on pump panel - ANSWER -
tachometer, ammeter,
engine temp, oil, fuel gauge, voltmeter and pump
hour meter
oil pressure and coolant temp are now
audible alarms
, how do priming devices push water into the pump? -
ANSWER -atmospheric
pressure pushes water up to
the pump
how does the priming device work? - ANSWER -the priming
device is used to
create a vacuum inside the pump. the negative pressure within
the pump casing
and suction hose allows atmospheric pressure to push
water into the pump
atmospheric pressure at sea level is _________psi which gives
you theoretical
lift capability of _______feet - ANSWER
-14.7 psi
33.9
due to design constraints of apparatus pumps we need to keep
he fire apparatus with ______ to ______ feet above the waters
surface - ANSWER -10 to 15 feet
when priming raise water into a dry pump in not more than
______ seconds at
______feet of lift through a _______foot hose - ANSWER
-30 seconds
10 feet of
lift
ACTUAL COMPLETE REAL EXAM QUESTIONS AND
CORRECT ANSWERS (VERIFIED ANSWERS) ALREADY
GRADED A+ | GUARANTEED SUCCESS!! NEWEST
EXAM | JUST RELEASED!!
the Bourdon tube gauge is susceptible to its own problems -
ANSWER -if a noxxle is shut off to fast water hammer may
cause damage to the gauge if temps are below freezing water
inside gauge may cause permanent formation of the tube.
2%-3% erros is common
water supplied by an engine may come from a number of
different resources
such as - ANSWER -
engines tank
static water sources (ponds,
lakes etc)
fire
hydrant
or come from another engine such as in a
relay operation
NFPA standard states that the minimum pump capacity
for pumper fire
,apparatus shall be________ Gallons per minute -
ANSWER -750 GPM
fire pumps are rated at draft thru ______ ft of hard suction hose
and strainer with ______ ft lift. This testing applied to pumps up
to and including _______
GPM - ANSWER -20
10
1500
for _______ GPM pumps the required lift height drops to _____
FT and requires the use of _______ _______ ________ each
with appropriate strainers.
for 2000 GPM pumps or larger the lift height drops to ______ Ft
- ANSWER 1750
8 ft
double suction hose
6 ft
pump hour meter - ANSWER -total time pump has been operated
remote engine gauges on pump panel - ANSWER -
tachometer, ammeter,
engine temp, oil, fuel gauge, voltmeter and pump
hour meter
oil pressure and coolant temp are now
audible alarms
, how do priming devices push water into the pump? -
ANSWER -atmospheric
pressure pushes water up to
the pump
how does the priming device work? - ANSWER -the priming
device is used to
create a vacuum inside the pump. the negative pressure within
the pump casing
and suction hose allows atmospheric pressure to push
water into the pump
atmospheric pressure at sea level is _________psi which gives
you theoretical
lift capability of _______feet - ANSWER
-14.7 psi
33.9
due to design constraints of apparatus pumps we need to keep
he fire apparatus with ______ to ______ feet above the waters
surface - ANSWER -10 to 15 feet
when priming raise water into a dry pump in not more than
______ seconds at
______feet of lift through a _______foot hose - ANSWER
-30 seconds
10 feet of
lift
