Maintenance mechanic lvl 2 study guide
Questions & Answers | 100% Verified solutions |
Latest!!
Save
Practice questions for this set
Learn 1/7 Study using Learn
The commonest cause of gear failure is poor.
Choose an answer
1 Both Lubrication And Cooling 2 Oxidation
3 Cavitation 4 Lubrication
Don't know?
Terms in this set (174)
, ______metals are attracted by a Ferrous
magnet.
A rounded inside or outside corner Radius guage
can be measured with a
A sprocket that has no bushing is Set screw
held in position on its shaft by a
Babbitt is a tin alloy used as a Friction
bearing material that helps reduce
_______ between moving parts.
Before mounting a drive chain, Strait edge or steel rod
always check the alignment of the
sprockets with a
actuators convert _________ energy into Hydraulic, mechanical
__________ energy.
Lack of visible leakage from braided Burn, glaze
packing installed in pumps will cause
packing to ______ or ______
List 3 common packing materials for Cotton, flax, Teflon, carbon, graphite, synthetic
pumps
Name 3 of the 6 basic parts of a Primary seal rings, rotary face, stationary face,
mechanical seal secondary seals, the drive mechanism, spring
mechanism, primary seal
Questions & Answers | 100% Verified solutions |
Latest!!
Save
Practice questions for this set
Learn 1/7 Study using Learn
The commonest cause of gear failure is poor.
Choose an answer
1 Both Lubrication And Cooling 2 Oxidation
3 Cavitation 4 Lubrication
Don't know?
Terms in this set (174)
, ______metals are attracted by a Ferrous
magnet.
A rounded inside or outside corner Radius guage
can be measured with a
A sprocket that has no bushing is Set screw
held in position on its shaft by a
Babbitt is a tin alloy used as a Friction
bearing material that helps reduce
_______ between moving parts.
Before mounting a drive chain, Strait edge or steel rod
always check the alignment of the
sprockets with a
actuators convert _________ energy into Hydraulic, mechanical
__________ energy.
Lack of visible leakage from braided Burn, glaze
packing installed in pumps will cause
packing to ______ or ______
List 3 common packing materials for Cotton, flax, Teflon, carbon, graphite, synthetic
pumps
Name 3 of the 6 basic parts of a Primary seal rings, rotary face, stationary face,
mechanical seal secondary seals, the drive mechanism, spring
mechanism, primary seal
