2025 UA STAR PIPEFITTER CERTIFICATION PRACTICE EXAM
n n n n n n
QUESTIONS AND CORRECT ANSWERS (VERIFIED ANSWERS) PLUS RATI
n n n n n n n
ONALES 2026 Q&A n n
THIS EXAM CONTAINS:
n n
n
UA STAR PIPEFITTER CERTIFICATION PRACTICE EXAM
n n n n n
QUESTIONS AND CORRECT ANSWERS n n n
(VERIFIED ANSWERS) n n
EACH QUESTION ENTAIL RATIONALES
n n n n
2026 Q&A n
DOnNOTnCOPYnBYnMBO
FFIN
100% GUARANTEED PASS
n n
COMPLETE A+ STUDY GUIDE n n n
,UA STAR PIPEFITTER CERTIFICATION PRACTICE EXAM QUESTIONS AND C
n n n n n n n n
ORRECT ANSWERS (VERIFIED ANSWERS) PLUS RATIONALES 2026 Q&A
n n n n n n n
1. What is the primary purpose of a pipefitter’s level?
n n n n n n n n n
A)To measure distance
n n
B) To ensure proper alignment and pitch of piping
n n n n n n n
C) To determine pipe diameter
n n n
D)To check thread depth
n n n
Rationale: A level ensures pipes are properly pitched for drainage and
n n n n n n n n n n n
alignment in installation. n n
2. What is the most common welding process used for carbon steel piping?
n n n n n n n n n n n
A)TIG
B) SMAW (Shielded Metal Arc Welding)
n n n n
C) MIG
D)Oxy-acetylene
,Rationale: SMAW is widely used in the field for carbon steel due to porta
n n n n n n n n n n n n n
bility and versatility.
n n
3. Which fitting is used to change the direction of a pipeline by 90 degrees?
n n n n n n n n n n n n n
A)Tee
B) Elbow
C) Coupling
D)Reducer
Rationale: Elbows change direction, with 90° and 45° being most common.
n n n n n n n n n n
4. What type of thread is used on most pipe fittings for pressure systems?
n n n n n n n n n n n n
A)Straight
B) Tapered (NPT) n
C) Square
D)Metric
Rationale: NPT (National Pipe Thread) is tapered to ensure a tight, lea
n n n n n n n n n n n
k- resistant seal.
n n
5. What is the formula to find the circumference of a pipe?
n n n n n n n n n n
A)π × diameter²
n n
B) π × diameter
n n
C) diameter ÷ π n n
D)radius × π² n n
Rationale: Circumference equals π times the diameter.
n n n n n n
6. Which safety document outlines chemical hazards in the workplace?
n n n n n n n n
A)OSHA Card n
, B)Fire Permit
n
C) Safety Data Sheet (SDS)
n n n
D)Confined Space Entry Form n n n
Rationale: SDS provides information on handling, hazards, and emerge
n n n n n n n n
ncy procedures for chemicals.
n n n
7. What is the main purpose of pipe insulation?
n n n n n n n
A)Aesthetic improvement n
B) Temperature control and energy efficiency n n n n
C) Prevent corrosion n
D)Strengthen the pipe n n
Rationale: Insulation maintains temperature and prevents energy loss.
n n n n n n n
8. What is the standard angle for a welding bevel on a pipe joint?
n n n n n n n n n n n n
A)20°
B) 37.5°
C) 45°
D)60°
Rationale: 37.5° per side provides proper penetration for butt welds.
n n n n n n n n n
9. What is the meaning of “Schedule” in piping?
n n n n n n n
A)Pipe grade n
B)Pressure rating n
C) Wall thickness
n
D)Pipe lengthn
Rationale: Schedule designates wall thickness for pressure containment.
n n n n n n n
n n n n n n
QUESTIONS AND CORRECT ANSWERS (VERIFIED ANSWERS) PLUS RATI
n n n n n n n
ONALES 2026 Q&A n n
THIS EXAM CONTAINS:
n n
n
UA STAR PIPEFITTER CERTIFICATION PRACTICE EXAM
n n n n n
QUESTIONS AND CORRECT ANSWERS n n n
(VERIFIED ANSWERS) n n
EACH QUESTION ENTAIL RATIONALES
n n n n
2026 Q&A n
DOnNOTnCOPYnBYnMBO
FFIN
100% GUARANTEED PASS
n n
COMPLETE A+ STUDY GUIDE n n n
,UA STAR PIPEFITTER CERTIFICATION PRACTICE EXAM QUESTIONS AND C
n n n n n n n n
ORRECT ANSWERS (VERIFIED ANSWERS) PLUS RATIONALES 2026 Q&A
n n n n n n n
1. What is the primary purpose of a pipefitter’s level?
n n n n n n n n n
A)To measure distance
n n
B) To ensure proper alignment and pitch of piping
n n n n n n n
C) To determine pipe diameter
n n n
D)To check thread depth
n n n
Rationale: A level ensures pipes are properly pitched for drainage and
n n n n n n n n n n n
alignment in installation. n n
2. What is the most common welding process used for carbon steel piping?
n n n n n n n n n n n
A)TIG
B) SMAW (Shielded Metal Arc Welding)
n n n n
C) MIG
D)Oxy-acetylene
,Rationale: SMAW is widely used in the field for carbon steel due to porta
n n n n n n n n n n n n n
bility and versatility.
n n
3. Which fitting is used to change the direction of a pipeline by 90 degrees?
n n n n n n n n n n n n n
A)Tee
B) Elbow
C) Coupling
D)Reducer
Rationale: Elbows change direction, with 90° and 45° being most common.
n n n n n n n n n n
4. What type of thread is used on most pipe fittings for pressure systems?
n n n n n n n n n n n n
A)Straight
B) Tapered (NPT) n
C) Square
D)Metric
Rationale: NPT (National Pipe Thread) is tapered to ensure a tight, lea
n n n n n n n n n n n
k- resistant seal.
n n
5. What is the formula to find the circumference of a pipe?
n n n n n n n n n n
A)π × diameter²
n n
B) π × diameter
n n
C) diameter ÷ π n n
D)radius × π² n n
Rationale: Circumference equals π times the diameter.
n n n n n n
6. Which safety document outlines chemical hazards in the workplace?
n n n n n n n n
A)OSHA Card n
, B)Fire Permit
n
C) Safety Data Sheet (SDS)
n n n
D)Confined Space Entry Form n n n
Rationale: SDS provides information on handling, hazards, and emerge
n n n n n n n n
ncy procedures for chemicals.
n n n
7. What is the main purpose of pipe insulation?
n n n n n n n
A)Aesthetic improvement n
B) Temperature control and energy efficiency n n n n
C) Prevent corrosion n
D)Strengthen the pipe n n
Rationale: Insulation maintains temperature and prevents energy loss.
n n n n n n n
8. What is the standard angle for a welding bevel on a pipe joint?
n n n n n n n n n n n n
A)20°
B) 37.5°
C) 45°
D)60°
Rationale: 37.5° per side provides proper penetration for butt welds.
n n n n n n n n n
9. What is the meaning of “Schedule” in piping?
n n n n n n n
A)Pipe grade n
B)Pressure rating n
C) Wall thickness
n
D)Pipe lengthn
Rationale: Schedule designates wall thickness for pressure containment.
n n n n n n n
