VERIFIED QUESTIONS AND SOLUTIONS
◉A TRIAC conducts during: Answer: Both halves of the AC cycle
◉A DIAC is used to: Answer: Trigger a TRIAC
◉Phase control regulates power by: Answer: Delaying the firing
angle
◉Increasing firing angle delay will: Answer: Reduce output power
◉An op-amp is used to: Answer: Amplify voltage
◉An op-amp has how many inputs: Answer: Two
◉Negative feedback is used to: Answer: Stabilize gain
◉If feedback is lost in an op-amp, the output will: Answer: Saturate
◉A comparator output will be: Answer: High or low only
, ◉Logic gates operate using: Answer: Binary values
◉Binary logic uses which values: Answer: 0 and 1
◉An AND gate outputs HIGH when: Answer: All inputs are HIGH
◉An OR gate outputs HIGH when: Answer: Any input is HIGH
◉A NOT gate output is: Answer: The inverse of the input
◉A NAND gate outputs LOW when: Answer: All inputs are HIGH
◉A NOR gate outputs HIGH when: Answer: All inputs are LOW
◉An XOR gate outputs HIGH when: Answer: Inputs are different
◉An XNOR gate outputs HIGH when: Answer: Inputs are the same
◉A truth table shows: Answer: All possible input and output
combinations