EM 385 EXAM QUESTIONS AND
ANSWERS 2026 VERIFIED.
The provisions of this manual implement and supplement the safety and health standards and
requirements contained in 29 CFR 1910, 29 CFR 1926, 29 CFR 1960, EO 12196, FAR Clause
52.236.13, DODI 6055.1, AR 40-5, and AR 385-10. Where more stringent safety and
occupational health standards are set forth in these requirements and regulations, ________. -
ANS The more stringent standards shall apply
__________ personnel- as part of their quality control responsibilities- shall conduct and
document ________ in their daily QC logs. - ANS Contractor quality control ; Daily safety and
occupational health inspections
Before beginning each work activity involving a type of work presenting hazards not
experienced in previous project operations or where a new work crew or subcontractor is to
perform the work, the contractors performing that work activity shall prepare - ANS An AHA
AHA stands for - ANS Activity Hazard Analysis
Work shall not begin until the ______ for the work activity has been accepted by the ________
and discussed with all engaged in the activity, including the contractor, subcontractor, and
government on-site representatives at preparatory and initial phase control meetings -
ANS AHA ; GDA
______ shall be provided with safety and health indoctrination _________ as well as continuous
safety and health training to enable them to work in a safe manner. - ANS Employees ; prior
to start of work
@2026/2027 ALLRIGHTS RESERVED.
, The ______ is responsible for obtaining appropriate _______ and emergency assistance and for
notifying fire, law enforcement, and regulatory agencies. - ANS Contractor ; medical
A _______ delineating the best route to the nearest medical facility shall be prepared and
posted on the safety _______ board - ANS Highly visible board ; bulletin
The contents of ______ shall be checked by the employer _____ to their use on site and at least
every ______ months when work is in progress to ensure that they are complete, in good
condition and have not expired - ANS First aid kits ; prior ; 3 months
The ______ beam shall not be directed at employees : whenever possible, laser units in
operation shall be set ______ the heads of employees - ANS Laser ; above
______ shall monitor those individuals who have had a previous _______ injury, are known to
be on ______ or exhibits signs of possibly having consumed large amounts of alcohol in the
previous 24 hours for signs, or indicating symptoms of heat related injuries - ANS SSHO ; heat
related ; medication
What does SSHO stand for - ANS Sure safety and health officer
Because _______ can contribute to health problems ranging from ______ irritation to serious
_______ if found in high quantities or improper locations, a mold _______ shall be performed
when needed as indicated - ANS Mold ; minor ; debilitation ; assessment
Each ______ employer who has a place of employment in which ______ is occupationally
produced, _____ released,transported,stored,_____, or used shall _____ each workplace and
work operation to the AHA for the job/task to be completed - ANS Employer ; silica ; reacted ;
handled ; inspect
If work is to be performed at _____, a night operation _____ plan shall be developed to ensure
that all activities, areas, and _____ are adequately illuminated to perform work safely -
ANS Night ; lighting ; operations
@2026/2027 ALLRIGHTS RESERVED.
ANSWERS 2026 VERIFIED.
The provisions of this manual implement and supplement the safety and health standards and
requirements contained in 29 CFR 1910, 29 CFR 1926, 29 CFR 1960, EO 12196, FAR Clause
52.236.13, DODI 6055.1, AR 40-5, and AR 385-10. Where more stringent safety and
occupational health standards are set forth in these requirements and regulations, ________. -
ANS The more stringent standards shall apply
__________ personnel- as part of their quality control responsibilities- shall conduct and
document ________ in their daily QC logs. - ANS Contractor quality control ; Daily safety and
occupational health inspections
Before beginning each work activity involving a type of work presenting hazards not
experienced in previous project operations or where a new work crew or subcontractor is to
perform the work, the contractors performing that work activity shall prepare - ANS An AHA
AHA stands for - ANS Activity Hazard Analysis
Work shall not begin until the ______ for the work activity has been accepted by the ________
and discussed with all engaged in the activity, including the contractor, subcontractor, and
government on-site representatives at preparatory and initial phase control meetings -
ANS AHA ; GDA
______ shall be provided with safety and health indoctrination _________ as well as continuous
safety and health training to enable them to work in a safe manner. - ANS Employees ; prior
to start of work
@2026/2027 ALLRIGHTS RESERVED.
, The ______ is responsible for obtaining appropriate _______ and emergency assistance and for
notifying fire, law enforcement, and regulatory agencies. - ANS Contractor ; medical
A _______ delineating the best route to the nearest medical facility shall be prepared and
posted on the safety _______ board - ANS Highly visible board ; bulletin
The contents of ______ shall be checked by the employer _____ to their use on site and at least
every ______ months when work is in progress to ensure that they are complete, in good
condition and have not expired - ANS First aid kits ; prior ; 3 months
The ______ beam shall not be directed at employees : whenever possible, laser units in
operation shall be set ______ the heads of employees - ANS Laser ; above
______ shall monitor those individuals who have had a previous _______ injury, are known to
be on ______ or exhibits signs of possibly having consumed large amounts of alcohol in the
previous 24 hours for signs, or indicating symptoms of heat related injuries - ANS SSHO ; heat
related ; medication
What does SSHO stand for - ANS Sure safety and health officer
Because _______ can contribute to health problems ranging from ______ irritation to serious
_______ if found in high quantities or improper locations, a mold _______ shall be performed
when needed as indicated - ANS Mold ; minor ; debilitation ; assessment
Each ______ employer who has a place of employment in which ______ is occupationally
produced, _____ released,transported,stored,_____, or used shall _____ each workplace and
work operation to the AHA for the job/task to be completed - ANS Employer ; silica ; reacted ;
handled ; inspect
If work is to be performed at _____, a night operation _____ plan shall be developed to ensure
that all activities, areas, and _____ are adequately illuminated to perform work safely -
ANS Night ; lighting ; operations
@2026/2027 ALLRIGHTS RESERVED.
