MSSC-M3 CPT 4.0 - MANUFACTURING
PROCESSES AND PRODUCTION PT.2
EXAM QUESTIONS AND ANSWERS 2026
VERIFIED.
How is force measured when tightening bolts using a torque wrench? - ANS Newton-meter
The type of wrench best suited for the final tightening of a nut is __________. - ANS A box-
end wrench
Which wrench has speed of use as a benefit? - ANS Socket wrench
This wrench has an L-shaped or a T-shaped handle. - ANS Hex key wrench
What is the best wrench to use to loosen a bolt? - ANS Box-end wrench
The proper tool to remove a stripped fastener is __________. - ANS Extractor kit
Which problem with fasteners is most likely to cause joint failure? - ANS Incorrect torque
@2026/2027 ALLRIGHTS RESERVED.
, A __________ is best used for determining the number of threads per inch on a fastener. -
ANS Pitch gauge
The Phillips screwdriver has this type of head. - ANS Cross-shaped
What type of assembly can a threaded fastener create? - ANS Semi-permanent
To increase the torque used with a slotted screwdriver this must increase in size? -
ANS Handle diameter
This wrench is used to hold a fastener in place. - ANS Backup wrench
The vertical band saw is used to __________. - ANS All of the above
A __________ should always be used when removing chips or saw dust from the saw table. -
ANS Brush or hand broom
Very thin stock is specified using __________. - ANS Gauge numbers
The blade on a horizontal band saw __________ to continuously cut into the material. -
ANS Runs in one direction
Proper __________ is required to keep the blade from flexing, jamming, or breaking. -
ANS Blade tension
Round stock is specified using __________. - ANS Diameter and length
@2026/2027 ALLRIGHTS RESERVED.
PROCESSES AND PRODUCTION PT.2
EXAM QUESTIONS AND ANSWERS 2026
VERIFIED.
How is force measured when tightening bolts using a torque wrench? - ANS Newton-meter
The type of wrench best suited for the final tightening of a nut is __________. - ANS A box-
end wrench
Which wrench has speed of use as a benefit? - ANS Socket wrench
This wrench has an L-shaped or a T-shaped handle. - ANS Hex key wrench
What is the best wrench to use to loosen a bolt? - ANS Box-end wrench
The proper tool to remove a stripped fastener is __________. - ANS Extractor kit
Which problem with fasteners is most likely to cause joint failure? - ANS Incorrect torque
@2026/2027 ALLRIGHTS RESERVED.
, A __________ is best used for determining the number of threads per inch on a fastener. -
ANS Pitch gauge
The Phillips screwdriver has this type of head. - ANS Cross-shaped
What type of assembly can a threaded fastener create? - ANS Semi-permanent
To increase the torque used with a slotted screwdriver this must increase in size? -
ANS Handle diameter
This wrench is used to hold a fastener in place. - ANS Backup wrench
The vertical band saw is used to __________. - ANS All of the above
A __________ should always be used when removing chips or saw dust from the saw table. -
ANS Brush or hand broom
Very thin stock is specified using __________. - ANS Gauge numbers
The blade on a horizontal band saw __________ to continuously cut into the material. -
ANS Runs in one direction
Proper __________ is required to keep the blade from flexing, jamming, or breaking. -
ANS Blade tension
Round stock is specified using __________. - ANS Diameter and length
@2026/2027 ALLRIGHTS RESERVED.
