1|Page
Texas LP-Gas dispensing exam|| Questions And
Correct Detailed Answers ||Verified Exam!!! (Verified
Answers) |Already Graded A+||Newest Exam!!!
The ____ ____ ____ ____ ____ is used to determine
when a tank has been adequately filled - ANSWER-fixed
maximum liquid level gauge
Immediately after the filling process you should check for
____ with a ________ ____ ____ ____ - ANSWER-leaks
Non-corrosive leak detector solution
Composite cylinders are made from combination of ____
or ____ & a ____ ____ - ANSWER-fiberglass
Carbon
Plastic resin
____ & ____ ____ on composite cylinders are identical to
those used on steel or aluminum cylinders - ANSWER-
service
Fill connections
____ ____ ____ are required to be present at the
dispensing facility before a composite cylinder can be filled
- ANSWER-DOT special permits
,2|Page
One-pound steel refillable cylinders can be used to fuel
____ lanterns, camping equipment, grills, cooking
equipment & commercial landscaping and plumbing
equipment - ANSWER-outdoor
________ cylinders are filled using the gravity fill method.
A special adapter attachment is needed for the dispensing
equipment. A snap-acting "dead man" valve must be held
open manually by the operator. - ANSWER-one-pound
Tare weight & water capacity of a cylinder is marked on
the ____ - ANSWER-collar
Full or empty containers can ____ be stored or permitted
indoors - ANSWER-never
Area where more than ____ pounds of propane are stored
in one location must be provided with an approved
portable fire extinguisher - ANSWER-720
Fire Extinquishers are primarily used on ____ fires -
ANSWER-combustible
, 3|Page
Cylinders awaiting resale must be stored in a ____ & ____
position - ANSWER-vertical
Upright
Cylinders must be stored with the relief valve in the ____
space of the container - ANSWER-vapor
Stored cylinders must be atleast ____ feet away from gas
station fuel dispensers - ANSWER-20
Cabinets must be placed atleast ____ feet from doorways
of public buildings - ANSWER-5
Empty exchange cylinders should be handled in the same
manner as ____ cylinders - ANSWER-full
ASME LP-gas engine fuel and mobile containers must be
designed to provide atleast ____ psig if constructed on or
after April 1st 2001
Before April 1, 2001 it must be atleast ____ psig -
ANSWER-312
250
Texas LP-Gas dispensing exam|| Questions And
Correct Detailed Answers ||Verified Exam!!! (Verified
Answers) |Already Graded A+||Newest Exam!!!
The ____ ____ ____ ____ ____ is used to determine
when a tank has been adequately filled - ANSWER-fixed
maximum liquid level gauge
Immediately after the filling process you should check for
____ with a ________ ____ ____ ____ - ANSWER-leaks
Non-corrosive leak detector solution
Composite cylinders are made from combination of ____
or ____ & a ____ ____ - ANSWER-fiberglass
Carbon
Plastic resin
____ & ____ ____ on composite cylinders are identical to
those used on steel or aluminum cylinders - ANSWER-
service
Fill connections
____ ____ ____ are required to be present at the
dispensing facility before a composite cylinder can be filled
- ANSWER-DOT special permits
,2|Page
One-pound steel refillable cylinders can be used to fuel
____ lanterns, camping equipment, grills, cooking
equipment & commercial landscaping and plumbing
equipment - ANSWER-outdoor
________ cylinders are filled using the gravity fill method.
A special adapter attachment is needed for the dispensing
equipment. A snap-acting "dead man" valve must be held
open manually by the operator. - ANSWER-one-pound
Tare weight & water capacity of a cylinder is marked on
the ____ - ANSWER-collar
Full or empty containers can ____ be stored or permitted
indoors - ANSWER-never
Area where more than ____ pounds of propane are stored
in one location must be provided with an approved
portable fire extinguisher - ANSWER-720
Fire Extinquishers are primarily used on ____ fires -
ANSWER-combustible
, 3|Page
Cylinders awaiting resale must be stored in a ____ & ____
position - ANSWER-vertical
Upright
Cylinders must be stored with the relief valve in the ____
space of the container - ANSWER-vapor
Stored cylinders must be atleast ____ feet away from gas
station fuel dispensers - ANSWER-20
Cabinets must be placed atleast ____ feet from doorways
of public buildings - ANSWER-5
Empty exchange cylinders should be handled in the same
manner as ____ cylinders - ANSWER-full
ASME LP-gas engine fuel and mobile containers must be
designed to provide atleast ____ psig if constructed on or
after April 1st 2001
Before April 1, 2001 it must be atleast ____ psig -
ANSWER-312
250
