CON 2370 SIMPLIFIED ACQUISITION
PROCEDURES PRACTICE SOLUTION
2026 GUARANTEED PASS QUESTIONS
GRADED A+
◉ The cross-sectional area of three or more THW conductors in a
conduit must not exceed what percent of the cross-sectional area of
the conduit?
A) 30%
B) 40%
C) 50%
D) 60%. Answer: B) 40 %
Chapter 9 Table 1
◉ EMT must be supported within what distance from an outlet box,
junction box, device box, cabinet, conduit body or other
terminations?
A) 3 feet
B) 4 feet
,C) 5 feet
D) 6 feet. Answer: A) 3 feet
Article 358.30 (A)
◉ When a branch circuit feeds both noncontinuous and continuous
loads, the circuit must be sized to accommodate 100% of the
noncontinuous load plus what percent of the continuous load?
A) 110%
B) 115%
C) 120 %
D) 125%. Answer: D) 125%
Article. 210.20 (A)
◉ What is the allowable Ampacity of a 600 MCM copper conductor
type TW?
A) 300 Amps
B) 350 Amps
C) 355 Amps
D) 400 Amps. Answer: B) 350 Amps
, Table- 310.16
◉ The name given to a system or circuit conductor that is
intentionally grounded is?
A) Grounding Conductor
B) Bonding Conductor
C) High-leg conductor
D) Grounded or neutral conductor. Answer: D) Grounded or Neutral
Conductor
Article 100 Definitions
◉ The panels of switchboards must be made of?
A) Moisture resistant, noncombustible material
B) Raintight material
C) Impact-resistant material
D) Waterproof material. Answer: A) Moisture-resistant,
noncombustible material
PROCEDURES PRACTICE SOLUTION
2026 GUARANTEED PASS QUESTIONS
GRADED A+
◉ The cross-sectional area of three or more THW conductors in a
conduit must not exceed what percent of the cross-sectional area of
the conduit?
A) 30%
B) 40%
C) 50%
D) 60%. Answer: B) 40 %
Chapter 9 Table 1
◉ EMT must be supported within what distance from an outlet box,
junction box, device box, cabinet, conduit body or other
terminations?
A) 3 feet
B) 4 feet
,C) 5 feet
D) 6 feet. Answer: A) 3 feet
Article 358.30 (A)
◉ When a branch circuit feeds both noncontinuous and continuous
loads, the circuit must be sized to accommodate 100% of the
noncontinuous load plus what percent of the continuous load?
A) 110%
B) 115%
C) 120 %
D) 125%. Answer: D) 125%
Article. 210.20 (A)
◉ What is the allowable Ampacity of a 600 MCM copper conductor
type TW?
A) 300 Amps
B) 350 Amps
C) 355 Amps
D) 400 Amps. Answer: B) 350 Amps
, Table- 310.16
◉ The name given to a system or circuit conductor that is
intentionally grounded is?
A) Grounding Conductor
B) Bonding Conductor
C) High-leg conductor
D) Grounded or neutral conductor. Answer: D) Grounded or Neutral
Conductor
Article 100 Definitions
◉ The panels of switchboards must be made of?
A) Moisture resistant, noncombustible material
B) Raintight material
C) Impact-resistant material
D) Waterproof material. Answer: A) Moisture-resistant,
noncombustible material
