MASSACHUSETTS OIL BURNER LICENSE
EXAM 2026 | ACTUAL EXAM QUESTIONS AND
CORRECT ANSWERS | VERIFIED ANSWERS |
BRAND NEW VERSION!
Save
Terms in this set (193)
What is the voltage found at the TT 24 volts
terminals
,What are the 8 steps of a no heat 1 talk to customer 2 check tt.3 check to make
call sure an emergency switch is on 4check to make
sure there is oil in the tank 5 check to make sure
the main power going to the unit is on six check
to make sure that tank shut off valve is open 7
know whether the tank is located above or
below the burner I know the type and style of
the system that is being used on a one or two
pipe system
What is a cad cell A device containing condominium sulfide used
to prove the flame in oil burner furnace
How much air is needed to burn a In 2015 most oil burners are set up to burn with
gallon of number 2 fuel oil and approximately 50% excess air because it would
why. be dangerous to set up a burner for exactly the
correct amount of air
, What is the term InStep mean The stack relay is operating correctly
What is normal pump pressure 100 PSI
How is combustion achieved Atomization, air, ignition.
What is primary air and secondary Primary air, air that is introduced to a furnace
air burner before the combustion process has
taken place. secondary air, air that is introduced
to the furnace after combustion has taken
place and that supports combustion
How should an oil tank be It shall be secured attached to a non-
supported combustible supports
What is the wire gauge use an oil 14 gauge 15 amp fuse
burner circuits
EXAM 2026 | ACTUAL EXAM QUESTIONS AND
CORRECT ANSWERS | VERIFIED ANSWERS |
BRAND NEW VERSION!
Save
Terms in this set (193)
What is the voltage found at the TT 24 volts
terminals
,What are the 8 steps of a no heat 1 talk to customer 2 check tt.3 check to make
call sure an emergency switch is on 4check to make
sure there is oil in the tank 5 check to make sure
the main power going to the unit is on six check
to make sure that tank shut off valve is open 7
know whether the tank is located above or
below the burner I know the type and style of
the system that is being used on a one or two
pipe system
What is a cad cell A device containing condominium sulfide used
to prove the flame in oil burner furnace
How much air is needed to burn a In 2015 most oil burners are set up to burn with
gallon of number 2 fuel oil and approximately 50% excess air because it would
why. be dangerous to set up a burner for exactly the
correct amount of air
, What is the term InStep mean The stack relay is operating correctly
What is normal pump pressure 100 PSI
How is combustion achieved Atomization, air, ignition.
What is primary air and secondary Primary air, air that is introduced to a furnace
air burner before the combustion process has
taken place. secondary air, air that is introduced
to the furnace after combustion has taken
place and that supports combustion
How should an oil tank be It shall be secured attached to a non-
supported combustible supports
What is the wire gauge use an oil 14 gauge 15 amp fuse
burner circuits
