EM 385 1-1 EXAM
55+ (Fully Updated 2026) Exam Questions + Verified & Rationalized
Answers | A+ Graded
100% Guarantee Pass
📋 DOCUMENT OVERVIEW 58 Qs
This document, EM 385 1-1 Exam, covers essential topics in construction safety management, including
SSHO qualifications, equipment maintenance, ladder safety, first aid and CPR requirements, access and
storage procedures, commercial vehicle safety, and electrical work permits. The document provides 58
exam-style questions with correct answers and detailed explanations, serving as a study resource for
students to review, understand, and reinforce their knowledge of these critical concepts. By utilizing this
document, students can gain a thorough grasp of the subject matter and prepare for construction safety
management exams.
✓ Verified Answers ✓ Exam Ready ✓ Study Guide
Trusted by thousands of students and professionals worldwide
EXAM QUESTIONS
QUESTION 1
The SSHO must have completed or have the equivalent to __________
CORRECT ANSWER
OSHA 20 Constructions or OSHA 20 general Industries
RATIONALE: The correct answer is because the Outreach Training Program, which provides the equivalent training to
OSHA's 20- and 30-hour Construction and General Industry courses, is a requirement for Site Safety and Health Officers
(SSHOs) to demonstrate their knowledge of OSHA standards and regulations. This training is essential for SSHOs to
ensure compliance with OSHA regulations and to effectively implement site-specific safety and health programs.
QUESTION 2
Any equipment that is damaged, malfunctioning or was subjected to a fall must be
CORRECT ANSWER
Removed from service and replaced
Trusted by thousands of students and professionals worldwide Page 1 of 16
, RATIONALE: The equipment must be removed from service and replaced because its damaged or malfunctioning state
poses a risk to users, making it unsafe for continued use. By removing it from service and replacing it, the risk is
eliminated, ensuring the safety and well-being of those who will use the replacement equipment.
QUESTION 3
for workers with a body weight less than _____
CORRECT ANSWER
130lbs
RATIONALE: This question likely involves a specific safety or operational standard that applies to workers of a certain
weight, often related to equipment usage or workplace ergonomics. The precise weight of 130lbs is most likely used as a
threshold to ensure workers are not overexerting themselves or to prevent equipment malfunction, making it a critical
consideration for workplace safety.
QUESTION 4
For portable ladders the length of single ladders or individual sections of ladders must not exceed
CORRECT ANSWER
30ft
RATIONALE: The correct answer is based on safety regulations for portable ladders, which dictate a maximum length to
prevent overreaching and reduce the risk of falls, as excessive length increases the likelihood of losing balance. This
standard length allows users to safely access areas while maintaining control and stability, thereby minimizing hazards
associated with ladder usage.
QUESTION 5
First aid and CPR availability is not
CORRECT ANSWER
30 minutes
RATIONALE: The key concept of first aid and CPR availability is typically defined in relation to the proximity of an
Automated External Defibrillator (AED) and emergency services. "30 minutes" refers to the American Heart Association's
recommendation for first aid and CPR training to be within 30 minutes of an AED and emergency services, thereby
ensuring prompt medical assistance in the event of an emergency.
QUESTION 6
When working on a roof points of access materials handling areas and storage areas must ____
CORRECT ANSWER
be connected to the work area by a clear access path formed by two warning lines
Trusted by thousands of students and professionals worldwide Page 2 of 16
, RATIONALE: This requirement ensures safe passage for individuals, including workers, emergency responders, and
equipment, by maintaining a clear path to the work area, thereby preventing accidents and entanglements with warning
lines or other obstacles. The presence of warning lines also alerts individuals to potential hazards, such as uneven terrain
or slippery surfaces, allowing them to exercise caution when navigating the area.
QUESTION 7
Which of the following does not need to be included in the AHA for hot work
CORRECT ANSWER
the number of fire extinguishers within a 500 ft radius of the hot work
RATIONALE: The AHA (Accident History and Assessment) for hot work primarily focuses on identifying potential fire
hazards and assessing the risks associated with hot work activities. The number of fire extinguishers within a 500 ft
radius of the hot work is more relevant to the HAZARD ASSESSMENT aspect of hot work procedures, which is typically
documented separately, rather than the AHA, making it a correct answer.
QUESTION 8
When an unqualified person is working in an elevated position near overhead lines with a normal
voltage of 50V or less in a location that allows access from the ground, near enough that a hazard
might exist. What is the minimum clearance distance that must be maintained for the person and the
longest conductive object tool being used
CORRECT ANSWER
10ft
RATIONALE: The key concept here is that the clearance distance is determined by the length of the longest conductive
object being used, as the person themselves is already considered a part of the hazard and is not a separate object from
which clearance is required. Therefore, the minimum clearance distance is the length of the longest conductive object
plus the minimum additional distance required to prevent the person from coming into contact with the overhead lines,
which is typically considered to be 10ft (or 3m) to account for any unexpected movements or swaying of the person.
QUESTION 9
When access to excavation in excess of _______ ft in depth requires stairs ramps and mechanical
personnel, hoist shall be provided
CORRECT ANSWER
20ft
RATIONALE: The requirement for stairs, ramps, and mechanical personnel with a hoist stems from safety regulations to
ensure accessible egress and safe transportation of personnel in deep excavations, specifically when the depth exceeds a
certain threshold. "20ft" is the critical depth at which these safety measures are necessary to mitigate risks associated
with deep excavations, such as falls and difficulties in accessing the site.
QUESTION 10
Signs warning of the presence of construction site, hazards and requiring unauthorized persons to
keep out shall be posted every ______ft of fencing
CORRECT ANSWER
Trusted by thousands of students and professionals worldwide
Page 3 of 16
55+ (Fully Updated 2026) Exam Questions + Verified & Rationalized
Answers | A+ Graded
100% Guarantee Pass
📋 DOCUMENT OVERVIEW 58 Qs
This document, EM 385 1-1 Exam, covers essential topics in construction safety management, including
SSHO qualifications, equipment maintenance, ladder safety, first aid and CPR requirements, access and
storage procedures, commercial vehicle safety, and electrical work permits. The document provides 58
exam-style questions with correct answers and detailed explanations, serving as a study resource for
students to review, understand, and reinforce their knowledge of these critical concepts. By utilizing this
document, students can gain a thorough grasp of the subject matter and prepare for construction safety
management exams.
✓ Verified Answers ✓ Exam Ready ✓ Study Guide
Trusted by thousands of students and professionals worldwide
EXAM QUESTIONS
QUESTION 1
The SSHO must have completed or have the equivalent to __________
CORRECT ANSWER
OSHA 20 Constructions or OSHA 20 general Industries
RATIONALE: The correct answer is because the Outreach Training Program, which provides the equivalent training to
OSHA's 20- and 30-hour Construction and General Industry courses, is a requirement for Site Safety and Health Officers
(SSHOs) to demonstrate their knowledge of OSHA standards and regulations. This training is essential for SSHOs to
ensure compliance with OSHA regulations and to effectively implement site-specific safety and health programs.
QUESTION 2
Any equipment that is damaged, malfunctioning or was subjected to a fall must be
CORRECT ANSWER
Removed from service and replaced
Trusted by thousands of students and professionals worldwide Page 1 of 16
, RATIONALE: The equipment must be removed from service and replaced because its damaged or malfunctioning state
poses a risk to users, making it unsafe for continued use. By removing it from service and replacing it, the risk is
eliminated, ensuring the safety and well-being of those who will use the replacement equipment.
QUESTION 3
for workers with a body weight less than _____
CORRECT ANSWER
130lbs
RATIONALE: This question likely involves a specific safety or operational standard that applies to workers of a certain
weight, often related to equipment usage or workplace ergonomics. The precise weight of 130lbs is most likely used as a
threshold to ensure workers are not overexerting themselves or to prevent equipment malfunction, making it a critical
consideration for workplace safety.
QUESTION 4
For portable ladders the length of single ladders or individual sections of ladders must not exceed
CORRECT ANSWER
30ft
RATIONALE: The correct answer is based on safety regulations for portable ladders, which dictate a maximum length to
prevent overreaching and reduce the risk of falls, as excessive length increases the likelihood of losing balance. This
standard length allows users to safely access areas while maintaining control and stability, thereby minimizing hazards
associated with ladder usage.
QUESTION 5
First aid and CPR availability is not
CORRECT ANSWER
30 minutes
RATIONALE: The key concept of first aid and CPR availability is typically defined in relation to the proximity of an
Automated External Defibrillator (AED) and emergency services. "30 minutes" refers to the American Heart Association's
recommendation for first aid and CPR training to be within 30 minutes of an AED and emergency services, thereby
ensuring prompt medical assistance in the event of an emergency.
QUESTION 6
When working on a roof points of access materials handling areas and storage areas must ____
CORRECT ANSWER
be connected to the work area by a clear access path formed by two warning lines
Trusted by thousands of students and professionals worldwide Page 2 of 16
, RATIONALE: This requirement ensures safe passage for individuals, including workers, emergency responders, and
equipment, by maintaining a clear path to the work area, thereby preventing accidents and entanglements with warning
lines or other obstacles. The presence of warning lines also alerts individuals to potential hazards, such as uneven terrain
or slippery surfaces, allowing them to exercise caution when navigating the area.
QUESTION 7
Which of the following does not need to be included in the AHA for hot work
CORRECT ANSWER
the number of fire extinguishers within a 500 ft radius of the hot work
RATIONALE: The AHA (Accident History and Assessment) for hot work primarily focuses on identifying potential fire
hazards and assessing the risks associated with hot work activities. The number of fire extinguishers within a 500 ft
radius of the hot work is more relevant to the HAZARD ASSESSMENT aspect of hot work procedures, which is typically
documented separately, rather than the AHA, making it a correct answer.
QUESTION 8
When an unqualified person is working in an elevated position near overhead lines with a normal
voltage of 50V or less in a location that allows access from the ground, near enough that a hazard
might exist. What is the minimum clearance distance that must be maintained for the person and the
longest conductive object tool being used
CORRECT ANSWER
10ft
RATIONALE: The key concept here is that the clearance distance is determined by the length of the longest conductive
object being used, as the person themselves is already considered a part of the hazard and is not a separate object from
which clearance is required. Therefore, the minimum clearance distance is the length of the longest conductive object
plus the minimum additional distance required to prevent the person from coming into contact with the overhead lines,
which is typically considered to be 10ft (or 3m) to account for any unexpected movements or swaying of the person.
QUESTION 9
When access to excavation in excess of _______ ft in depth requires stairs ramps and mechanical
personnel, hoist shall be provided
CORRECT ANSWER
20ft
RATIONALE: The requirement for stairs, ramps, and mechanical personnel with a hoist stems from safety regulations to
ensure accessible egress and safe transportation of personnel in deep excavations, specifically when the depth exceeds a
certain threshold. "20ft" is the critical depth at which these safety measures are necessary to mitigate risks associated
with deep excavations, such as falls and difficulties in accessing the site.
QUESTION 10
Signs warning of the presence of construction site, hazards and requiring unauthorized persons to
keep out shall be posted every ______ft of fencing
CORRECT ANSWER
Trusted by thousands of students and professionals worldwide
Page 3 of 16
