NICET Level III Inspection,Testing, and
Maintenance of Water Based Systems
Practice Test(Latest 2026 Update) 100%
Verified Questions & Answers | Grade A
Save
Terms in this set (133)
,The inspection of a fire pump C) To keep the pump from over heating and
circulation relief valve verifies damaging component systems D) Water is
which two situations? (Choose flowing thru it properly
two). A). To avoid over
pressurizing the system. B). To
ensure all air is released from the
pump head. C). To keep the pump
from over heating and damaging
components. D). Water is flowing
thru it properly
,Pressure readings for a water A) At the hydraulically most remote nozzle
spray system shall be made to
ensure that water flow is not
impeded by partially closed
valves or plugged nozzles? At
what point must this reading be
taken? A). At the hydraulically
most remote nozzle. B). At the
most remote nozzle in the
system. C). At the nozzle in the
mid point of the system. D). At
three random nozzles
NICET III Practice Questions
, On a hydrostatic test of a B)50.
standpipe where the where the
maximum pressure is in excess of
150psi, which pressure would the
inspector add to the maximum
pressure to get the hydrostatic
test pressure? A) 25. B) 50. C)100.
D) 150
Which three of the following A) Check and clean screens and filters. B)
operations should be included Drain water from low points
when restoring a water mist D) Replace plugs or caps on auxiliary drains.
system to service following a test
(choose 3). A) Check and clean
screens and filters. B) Drain water
from low points. C). Lubricate
valve seats. D) Replace plugs or
caps on auxiliary drains
Maintenance of Water Based Systems
Practice Test(Latest 2026 Update) 100%
Verified Questions & Answers | Grade A
Save
Terms in this set (133)
,The inspection of a fire pump C) To keep the pump from over heating and
circulation relief valve verifies damaging component systems D) Water is
which two situations? (Choose flowing thru it properly
two). A). To avoid over
pressurizing the system. B). To
ensure all air is released from the
pump head. C). To keep the pump
from over heating and damaging
components. D). Water is flowing
thru it properly
,Pressure readings for a water A) At the hydraulically most remote nozzle
spray system shall be made to
ensure that water flow is not
impeded by partially closed
valves or plugged nozzles? At
what point must this reading be
taken? A). At the hydraulically
most remote nozzle. B). At the
most remote nozzle in the
system. C). At the nozzle in the
mid point of the system. D). At
three random nozzles
NICET III Practice Questions
, On a hydrostatic test of a B)50.
standpipe where the where the
maximum pressure is in excess of
150psi, which pressure would the
inspector add to the maximum
pressure to get the hydrostatic
test pressure? A) 25. B) 50. C)100.
D) 150
Which three of the following A) Check and clean screens and filters. B)
operations should be included Drain water from low points
when restoring a water mist D) Replace plugs or caps on auxiliary drains.
system to service following a test
(choose 3). A) Check and clean
screens and filters. B) Drain water
from low points. C). Lubricate
valve seats. D) Replace plugs or
caps on auxiliary drains
