1|Page
OACETT PPE EXAM ONTARIO ASSOCIATED OF CERTIFIED
ENGINEERING TECHNICIANS AND TECHNOLOGISTS LATEST 2026-
2027 ACTUAL EXAM WITH COMPLETE QUESTIONS AND CORRECT
DETAILED ANSWERS (100% VERIFIED ANSWERS) |ALREADY
GRADED A+| ||PROFESSOR VERIFIED|| ||BRANDNEW!!!||
Identify the TWO most important reasons for maintaining good
MWS apparatus records. - ANSWER-Keeps everyone on the
team informed about equipment conditions.
Helps determine whether equipment should be repaired/replaced.
An MWS apparatus may have steering system problems if the
steering wheel can be rotated (without moving front tires) more
than: - ANSWER-10 degrees
A MWS apparatus should be started with all electrical switches in
the OFF position in order to: - ANSWER-Start engine without a
load
,2|Page
During MWS apparatus service testing, the atmospheric air
temperature should be between: - ANSWER-0 degree F and 100
degree F
Identify THREE pieces of equipment needed to conduct service
testing on an MWS apparatus equipped with a fire pump -
ANSWER-tachometer
smoothbore tips
external test gauges
The pressure control service test measure pressure control
devices at three different points. They are: - ANSWER-90 psi,
150psi, and 250psi
NFPA 1911 requires an MWS apparatus equipped with a fire
pump to be service tested: - ANSWER-At least once a year or
when it has undergone extensive pump repair.
, 3|Page
When performing a vacuum service test, once the engine is
turned off, the column of mercury should fall no more than: -
ANSWER-10 inches in 5 minutes
Identify THREE critical items that should be included on an MWS
apparatus daily inspection checklist. - ANSWER-apparatus unit
identification number
inspected by column
remarks column
Tracking engine performance across time uses data collected in
the: - ANSWER-fuel, oil, and mileage record.
Identify FOUR pre-service test for an MWS apparatus equipped
with a fire pump? - ANSWER-Road tests
Independent pump certification tests
OACETT PPE EXAM ONTARIO ASSOCIATED OF CERTIFIED
ENGINEERING TECHNICIANS AND TECHNOLOGISTS LATEST 2026-
2027 ACTUAL EXAM WITH COMPLETE QUESTIONS AND CORRECT
DETAILED ANSWERS (100% VERIFIED ANSWERS) |ALREADY
GRADED A+| ||PROFESSOR VERIFIED|| ||BRANDNEW!!!||
Identify the TWO most important reasons for maintaining good
MWS apparatus records. - ANSWER-Keeps everyone on the
team informed about equipment conditions.
Helps determine whether equipment should be repaired/replaced.
An MWS apparatus may have steering system problems if the
steering wheel can be rotated (without moving front tires) more
than: - ANSWER-10 degrees
A MWS apparatus should be started with all electrical switches in
the OFF position in order to: - ANSWER-Start engine without a
load
,2|Page
During MWS apparatus service testing, the atmospheric air
temperature should be between: - ANSWER-0 degree F and 100
degree F
Identify THREE pieces of equipment needed to conduct service
testing on an MWS apparatus equipped with a fire pump -
ANSWER-tachometer
smoothbore tips
external test gauges
The pressure control service test measure pressure control
devices at three different points. They are: - ANSWER-90 psi,
150psi, and 250psi
NFPA 1911 requires an MWS apparatus equipped with a fire
pump to be service tested: - ANSWER-At least once a year or
when it has undergone extensive pump repair.
, 3|Page
When performing a vacuum service test, once the engine is
turned off, the column of mercury should fall no more than: -
ANSWER-10 inches in 5 minutes
Identify THREE critical items that should be included on an MWS
apparatus daily inspection checklist. - ANSWER-apparatus unit
identification number
inspected by column
remarks column
Tracking engine performance across time uses data collected in
the: - ANSWER-fuel, oil, and mileage record.
Identify FOUR pre-service test for an MWS apparatus equipped
with a fire pump? - ANSWER-Road tests
Independent pump certification tests
