OSHA 510 Practice Exam Questions And Correct Answers 100% Verified

(True) - Workplace Injuries and Illnesses - Correct Answers True or False: Workplace injuries and Illnesses can lower morale and increased cost to train replacement workers (Protect American Workers) - To assure safe and healthful working conditions for working men and women by setting and enforcing standards and by providing training, outreach, education and assistance. - Correct Answers According to "The Act, What is the mission of OSHA? False - Employees are protected from retaliation for raising workplace health and safety concerns and for reporting work-related injuries and illnesses with OSHA (Without Fear of Punishment) - Correct Answers True or False: Section 11(C) of the OSH Act States: Employers shall furnish to each employees a place of employment which are free from recognized hazards? Meaning "general" or across the board - Correct Answers What is the Horizontal Standard? (True) - OSHA directives including (Enforcement and Compliance Directives) - Correct AnswersTrue or False: OSHA directives including Enforcement and Compliance directives ensures consistent enforcement of OSHA regulations (True) - 1903.19(c)(3) The employer's certification that abatement is complete must include, for each cited violation, in addition to the information required by paragraph (h) of this section, the date and method of abatement and a statement that affected employees and their representatives have been informed of the abatement. - Correct AnswersTrue or False: If not corrected and documented at time of inspection, the employers must certify that abatement is completed for each cited violation? The employer that caused a hazardous condition that violates an OSHA standard. - Correct AnswersDefine Creating Employer 1903.7 Present Credentials Opening Conference Walk through Closing conference - Correct AnswersWhat is the process CSHO use when conducting and inspection? True - 1904.7(b)(4)(i)(A) You keep the employee from performing one or more of the routine functions of his or her job, or from working the full workday that he or she would otherwise have been scheduled to work - Correct AnswersTrue or False: Days the employee was only able to work a partial work shift is classified as restricted work activity? The 200,000 figure in the formula represents the number of hours (100 employees working 40 hours per week, 50 weeks) per year would work, and provides the standard base for calculating incidence rates. - Correct AnswersWhen calculating incident rate, what does the 200,000 figure in the formula represent? True - By knowing and following the same rules your employees are expected to follow. - Correct AnswersTrue or False: Leading by example is a way to demonstrate management leadership and commitment to Safety and Health? (Accident Prevention Responsibilities.) - Correct AnswersIn accordance with (IAW) 1926.20(B) having a safety and health program and job site inspections by a competent person are two main components of an employer's ____________________ ____________________ responsibilities. 1926.150(c)(1)(i) A fire extinguisher, rated not less than 2A, shall be provided for each 3,000 square feet of the protected building area, or major fraction thereof. Travel distance from any point of the protected area to the nearest fire extinguisher shall not exceed (100 feet). - Correct AnswersHow far can a Class (A) fire extinguishers be away from the employees? True - 1926.200(a) General signs and symbols required by this subpart shall be (visible) at all times when work is being performed, and shall be removed or covered promptly when the hazards no longer exist. - Correct AnswersTrue or False: Accident prevention signs such as danger, caution and exits signs shall be visible while working. 1926.502(d)(16)(iv) bring an employee to a complete stop and limit maximum deceleration distance an employee travels to (3.5 feet) - Correct AnswersWhat is the maximum deceleration distance a personal fall arrest system shall bring employees to a stop? False - 1926.300(a) All hand and power tools and similar equipment, whether furnished by the employer or the employee, shall be maintained in a safe condition. - Correct AnswersTrue or False: Only hand and power tools purchased by the employer must be maintained in a safe condition, 1926.32(m) "Qualified" means one who, by possession of a recognized degree, certificate, or professional standing, or who by extensive knowledge, training, and experience, has successfully demonstrated his ability to solve or resolve problems relating to the subject matter, the work, or the project. - Correct AnswersIAW subpart C what is the definition of Qualified Person? 1926.351(e) ("Shielding"). Whenever practicable, all arc welding and cutting operations shall be shielded by noncombustible or flameproof screens which will protect employees and other persons working in the vicinity from the direct rays of the arc. - Correct AnswersHow do you protect employee and other employees vision in the vicinity during Arc Welding operations? True - 1926.350(i) Oil and grease hazards. Oxygen cylinders and fittings shall be kept away from oil or grease. Cylinders, cylinder caps and valves, couplings, regulators, hose, and apparatus shall be kept free from oil or greasy substances and shall not be handled with oily hands or gloves. Oxygen shall not be directed at oily surfaces, greasy clothes, or within a fuel oil or other storage tank or vessel. - Correct AnswersTrue or False: Failure to inspect oil or grease on regulator fitting, valves or cap threads on a oxygen cylinder can result in fire or explosion. 1926.502(d)(16)(v) have sufficient strength to withstand twice the potential impact energy of an employee (free falling a distance of 6 feet), or the free fall distance permitted by the system, whichever is less. - Correct AnswersHow should PFAS be rigged? 1926.502(f)(1)(ii) When mechanical equipment is being used, the warning line shall be erected not less than 6 feet (1.8 m) from the roof edge which is parallel to the direction of mechanical equipment operation, and not less than (10 feet) from the roof edge which is perpendicular to the direction of mechanical equipment operation. - Correct AnswersWhen using mechanical equipment perpendicular from the roof edge, how far away from the roof edge must warning line be? 1926.20(b)(1) It shall be the responsibility of the (employer) to initiate and maintain such programs as may be necessary to comply with this part. - Correct AnswersWho initiates and maintains accident prevention programs 1926.404(b)(1)(iii) Conductor program on construction sites covering all cord sets, receptacles which are (not a part of the permanent wiring of the building or structure), and equipment connected by cord and plug. - Correct AnswersDefine Assured Equipment Grounding Conductor program False - 1926.403(i)(2)(i) (50 volts or more shall be guarded). - Correct AnswersTrue or False: When guarding live parts, areas with 45 volts or greater, requires that only a qualified person (Electrician) have access to protected areas. 1926.449 The permanent (joining of metallic parts to form an electrically conductive path) which will assure electrical continuity and the capacity to conduct safely any current likely to be imposed. - Correct AnswersDefine Bonding? False - 1926.952(c)(1) At least one before each day or shift. - Correct AnswersTrue or False: When working around Power Transmission & Distribution lines you only have to give an initial Job briefing at the beginning of the project if the work being performed is repetitive and similar to other task? True - 1926.32(f) "Competent person" means one who is capable of identifying existing and predictable hazards in the surroundings or working conditions which are unsanitary, hazardous, or dangerous to employees, and who has authorization to take prompt corrective measures to eliminate them - Correct AnswersTrue or False: A competent person shall supervise the dismantling of scaffolding? 1926.502(b)(1) 42 inches plus or minus 3 inches. - Correct AnswersIAW Subpart M, what is the height of a top rail of a guardrail system? 1926.852(b) (All materials chutes, or sections thereof, at an angle of more than 45 deg. from the horizontal, shall be entirely enclosed,) - Correct AnswersWhen must a material chute be enclosed during demolition operations? (i) Cohesive soil with an unconfined compressive strength greater than (0.5 tsf but less than 1.5 tsf). - Correct AnswersDefine "Type B" soil. False - 1926.706(b) (All masonry walls over eight feet in height shall be adequately braced to prevent overturning) and to prevent collapse unless the wall is adequately supported so that it will not overturn or collapse. The bracing shall remain in place until permanent supporting elements of the structure are in place. - Correct AnswersTrue or False: A masonry wall must be braced when it reaches 6 feet in height? False - 1926.1052(c)(11) Handrails that will not be a permanent part of the structure being built shall have a (minimum clearance of 3 inches between the handrail and walls). - Correct AnswersTrue or False: On temporary stairs, handrails must have a minimum clearance of 4 inches? 1926.706(a) Equal to the height plus 4 feet. - Correct AnswersWhat are the requirements for a "limited access zone" for masonry construction? 1926.1053(a)(1)(i) 4 times the maximum intended load. - Correct AnswersWhat is the max intended load for self-supporting portable ladders? False - 1926.760(c) Up to 30 feet - Correct AnswersTrue or False: During Steel Erection, controlled decking zone can be used as fall protection up to a maximum height of 50 feet? Simple slope excavations which are open (24 hours or less (short term) and which are 12 feet or less in depth shall have a maximum allowable slope of ½:1). - Correct AnswersIn accordance with (IAW) subpart P, appendix B, figure B-1, when performing short-term excavations, what is the sloped ratio, duration limit, and depth limit when excavating Type A soil? 1926.1053(b)(16) Immediately with any kind of defect and shall be marked in a manner that readily identifies them as defective, or be tagged with "Do Not Use" or similar language, and shall be withdrawn from service until repaired. - Correct AnswersWhen must portable ladders be removed from service? 1926.451(g)(4)(xv) Crossbracing is acceptable in place of a midrail when the crossing point of two braces is between (20 inches and 30 inches) - Correct AnswersWhen is cross bracing on a scaffold acceptable as a midrail? False - 1926.251(a)(1) Rigging equipment for material handling shall be inspected (prior to use on each shift and as necessary) during its use to ensure that it is safe. Defective rigging equipment shall be removed from service. - Correct Answers True or False: Material handling rigging equipment only needs to be inspected once daily? Whenever there is a concern as to safety, the (operator) must have the authority to stop and refuse to handle loads until a qualified person has determined that safety has been assured. - Correct Answers Who has the authority to stop crane operations? 1926.1419(f) During operations requiring signals, the ability to transmit signals between the operator and signal person must be maintained. If that ability is interrupted at any time, the operator must safely stop operations requiring signals until it is reestablished and a proper signal is given and understood. - Correct Answers IAW 1926.1419, during operations when is the operator required to safely stop operations? 1926.1430(b) (The employer) must train each employee who will be assigned to work as a signal persons. - Correct Answers Who is responsible for training crane signal personnel? False - 1926.1001(f)(2)(iv) Material used in the ROPS must have the capability of performing at (zero degrees Fahrenheit). - Correct Answers True or False: Rollover Protection materials must perform at 10 degrees Fahrenheit? 1910.178 - Correct Answers What regulation cover training for powered industrial trucks? ANSI Z87.1 - Correct Answers IAW Subpart A, which organization and regulation (incorporated by reference) covers eye and face protection? Engineering Controls Administrative Controls PPE - Correct Answers What is the hierarchical control method employers use to protect employees? 1910.134 - Correct Answers Respirators are covered by what regulation? 1926.50(c) In the absence of an infirmary, clinic, hospital, or physician. - Correct Answers IAW Subpart D, when is personnel certified first-aid training required?