PA State Auto Inspection Final Exam Questions Comprehensive Resource To Help You Ace Exams Includes Frequently Tested Questions With ELABORATED 100% Correct COMPLETE SOLUTIONS Guaranteed Pass First Attempt!! Current Update!!

PA State Auto Inspection Final Exam Questions Comprehensive Resource To Help You Ace Exams Includes Frequently Tested Questions With ELABORATED 100% Correct COMPLETE SOLUTIONS Guaranteed Pass First Attempt!! Current Update!! 1. What's the minimum steering wheel size? - Correct Answer: 13 inches 2. The horn should be heard at least ________feet away. - Correct Answer: 200 feet 3. What do we look for when checking the brake pedal? - Correct Answer: Can't go down more than 80% of total travel. Can't fade when vehicle is stopped. (bleed by in master cylinder) No excessive friction in linkage. Can't be missing the rubber pedal pad. 4. What's the min. brake specs for Bonded?_______Riveted?_________ - Correct Answer: Bonded 2/32 Riveted 1/32 5. What do we check brake hoses for? - Correct Answer: Make sure they aren't disconnected, don't leak, flattened or Restricted, dry rot (cord showing) 6. List the items for interior inspection. - Correct Answer: Steering wheel free play Steering gear box Steering column Proper size steering wheel Proper turning Flexible steering coupler Indicator lamps for high beam, turn signals. Horn- must be stock type Brake pedal travel Brake pedal fade Brake pedal linkage Brake pedal pad Seats- DRIVERS seat and back must be firmly attached No springs sticking out of DRIVER'S seat Seat adjustment must work Seat belts in good condition ( if originally equipped) Rear view mirror- no cracks or discoloration Rear view mirror- must hold adjustment. No junk hanging on it. 7. Describe steering "Lock to Lock" - Correct Answer: Turning the front wheels as far as they go from one side to the other. "Stop to Stop" 8. Describe the "1/4 inch Play Test" - Correct Answer: Used to check tightness of steering linkage and gearbox. Raise front wheels off the ground. Have someone hold on the brakes to eliminate bearing play. Wiggle the front tires. No more than 1/4 play allowed measured at the outside of the tire. 9. What do we check motor mounts for? - Correct Answer: Reject if broken. 10. List all items for under hood inspection. - Correct Answer: Hood latch in good working order. Must be double latched. Check motor mounts No fuel leaks No loose fuel lines Fuel tanks and lines must be OEM or equal to. No fuels lines touching hot or moving surfaces. No fuel system parts inside the car. Alternate fuel systems (propane) must meet code standards. Throttle must work properly No holes or cracks in firewall No exhaust leaks No master cylinder leaks No brake lines, flattened, disconnected, restricted or leaking. Booster for power brakes must be working properly Battery must be securely fastened.