TFM02 TEST QUESTIONS AND ANSWERS

TFM02 TEST LATEST
what does HMIS stand for - ANSWERS-Hazardous Material
Identificaion System


what classification of fires requires a rating number behind the
classification letter - ANSWERS-A&B


required building protection - ANSWERS-requires F.E. for class A fires


occupation Hazard protection - ANSWERS-requires classified F.E.'s for
the potential fires present


installation height for a F.E weighing OVER 40lbs - ANSWERS-the top
shall not exceed 3 1/2 ft


installation height for a FE weighing 40lbs or LESS - ANSWERS-the
top shall not exceed 5 ft


MINIMUM installation height for any FE - ANSWERS-the bottom shall
not be lower than 4 inches


maximum travel distances to FE for each classification - ANSWERS-A-
75ft
END OF
PAGE 1

, TFM02 TEST LATEST
B-50
C-not specified
D-75
K-30


what type of FE's have the potential to be non rechargeable? -
ANSWERS-Dry chemical and halon agent


maintenance procedures shall include an examination of - ANSWERS--
mechanical parts
-extinguishing agent
-expelling means
-physical condition


what type of FE requires all agent be removed if partial has been
removed? - ANSWERS-water mistor wet chemical


all extinguishers besides ________ requires a verification of service
collar after being recharged - ANSWERS-Cartridge- or cylinder-
operated


END OF
PAGE 2