When a cutting flame has an excuss of fuel, the flame is called a(n) _______ flame.
Give this one a try later!
carburizing
When pure oxygen is combined with fueled gases, the pure oxygen produces _______.
Give this one a try later!
a high-temperature flame needed for flame cutting
The attachment on the top of a fuel gas cylinder that allows the gas to flow only in
one direction is called a ____.
, Give this one a try later!
Check valve
To prevent fume hazards, there must be at least ________ cubic feet of air for each
welder.
Give this one a try later!
10,000
The smallest standard oxygen cylinder holds about ______ cubic feet of oxygen.
Give this one a try later!
85
A good safety practice is _______.
Give this one a try later!
writing HOT on hot metal before leaving it unattended
The first step in installing a cutting tip is to _________.
Give this one a try later!
Give this one a try later!
carburizing
When pure oxygen is combined with fueled gases, the pure oxygen produces _______.
Give this one a try later!
a high-temperature flame needed for flame cutting
The attachment on the top of a fuel gas cylinder that allows the gas to flow only in
one direction is called a ____.
, Give this one a try later!
Check valve
To prevent fume hazards, there must be at least ________ cubic feet of air for each
welder.
Give this one a try later!
10,000
The smallest standard oxygen cylinder holds about ______ cubic feet of oxygen.
Give this one a try later!
85
A good safety practice is _______.
Give this one a try later!
writing HOT on hot metal before leaving it unattended
The first step in installing a cutting tip is to _________.
Give this one a try later!
