Interior Wall And Ceiling Finish Exam
Questions With 100% Verified Answers
____ gypsum paneling has a face layer of vinyl and specially treated
edges. -
correct answer ✅Commercial
Gypsum wallboard is commonly referred to as ____. -
correct answer ✅sheet goods
Straight cuts should be made in drywall with a ____ -
correct answer ✅utility knife
When fastening drywall with screws, the screw head should ____. -
correct answer ✅form a slight dimple in the face of the wallboard.
A special ____ that releases on surface contact is used when driving
drywall screws with an electric drill. -
correct answer ✅chuck
Gypsum wallboard can be attached to wood studs with ____. -
correct answer ✅Any of the above.
, Interior Wall And Ceiling Finish Exam
Questions With 100% Verified Answers
Outside corners of gypsum wallboard installations are reinforced
with ____. -
correct answer ✅wood veneer trim
If a texture paint finish will not be used on a wall, ____ coat(s) of
joint compound should be applied over the joint tape and sanded
smooth. -
correct answer ✅four
Type-X wallboard is used for its ____. -
correct answer ✅None of the above.
Gypsum wallboard is sometimes applied in two layers, especially in
commercial buildings and where fire resistance is important. Joints
in the finish layer should be offset at least ____″ from the joints in
the base layer. -
correct answer ✅6
In most modern construction, ____ is used as a base for plaster. -
correct answer ✅Either A or B.
Questions With 100% Verified Answers
____ gypsum paneling has a face layer of vinyl and specially treated
edges. -
correct answer ✅Commercial
Gypsum wallboard is commonly referred to as ____. -
correct answer ✅sheet goods
Straight cuts should be made in drywall with a ____ -
correct answer ✅utility knife
When fastening drywall with screws, the screw head should ____. -
correct answer ✅form a slight dimple in the face of the wallboard.
A special ____ that releases on surface contact is used when driving
drywall screws with an electric drill. -
correct answer ✅chuck
Gypsum wallboard can be attached to wood studs with ____. -
correct answer ✅Any of the above.
, Interior Wall And Ceiling Finish Exam
Questions With 100% Verified Answers
Outside corners of gypsum wallboard installations are reinforced
with ____. -
correct answer ✅wood veneer trim
If a texture paint finish will not be used on a wall, ____ coat(s) of
joint compound should be applied over the joint tape and sanded
smooth. -
correct answer ✅four
Type-X wallboard is used for its ____. -
correct answer ✅None of the above.
Gypsum wallboard is sometimes applied in two layers, especially in
commercial buildings and where fire resistance is important. Joints
in the finish layer should be offset at least ____″ from the joints in
the base layer. -
correct answer ✅6
In most modern construction, ____ is used as a base for plaster. -
correct answer ✅Either A or B.
