1|Page
Qualified Elevator Inspector Training Fund (QEITF),
Qualified Elevator Inspector (QEI) Certification
Exam||Newest Exam!!|| Actual Test Questions and
Correct Answers With Rationales LATEST THIS
YEAR.pdf||NEWEST EXAM!!!
What act covers elevating devices in the province of
Quebec? - Answer-Building act
Where can information be found on the hazards of a
controlled product? - Answer-MSDS
What is a legal responsibility of an apprentice "mechanic
in training"? - Answer-Work under the supervision of a
mechanic
What code details provisions for maintaining minimum
standards for building construction? - Answer-NBCC
What is the final step in the process of standards
development according to the standards development
flowchart under the CSA organization? - Answer-
Maintenance
,2|Page
What approach is used to create standards in order to
promote fairness and utilize the expertise of interest
groups? - Answer-Balanced matrix approach
Which standard committee has the sole responsibility for
approving the technical content of a standard for the CSA
development process. - Answer-Technical committee
How many types of committees are involved in developing
content of standards for the CSA development
organizations? - Answer-3
Who is responsible for accrediting the CSA? - Answer-The
standards council of canada
What year did the A17.1 and CSA B44 harmonization
commence for North America? - Answer-1994
What is the result of the ASME A17.1/CSA B44
harmonization process? - Answer-A document that
contains the best requirements from both Canadian and
American codes
,3|Page
When was the first edition of ASME A17.1 code
published? - Answer-1921
When was the harmonization of the ASME A17.1 and the
CSA B44 completed? - Answer-2007
Where is the toe guard (apron) located? - Answer-Car
assembly
What is the main advantage of the traction elevator as
compared to the drum type elevator? - Answer-No height
restriction
What component is used to join two sections of guide
rails? - Answer-Fish plate
Where is the drive machine typically located for MRL
elevators? - Answer-Hoistway
How long have elevators been in existence? - Answer-
More than 2000 years
, 4|Page
Who is responsible for selecting the employees
representatives for a workers trade committee (JHSC) -
Answer-Workers
When was the first edition of the CSA B44 code
published? - Answer-1938
How often is the code book revised to a new edition in the
modern era? - Answer-3
How may a standard become mandatory making it a
code? - Answer-After being adopted by a government or
regulatory authority
How are sections of the ASME A17.1/CSA B44 code
broken down into further detail? - Answer-Sub-Sections
What two groupings are used to construct the code
identification system in the ASME A17.1/CSA B44? -
Answer-Parts and sections
How are revision changes denoted when appearing for the
first time in the ASME A17.1/CSA B44-10? - Answer-(10)
Qualified Elevator Inspector Training Fund (QEITF),
Qualified Elevator Inspector (QEI) Certification
Exam||Newest Exam!!|| Actual Test Questions and
Correct Answers With Rationales LATEST THIS
YEAR.pdf||NEWEST EXAM!!!
What act covers elevating devices in the province of
Quebec? - Answer-Building act
Where can information be found on the hazards of a
controlled product? - Answer-MSDS
What is a legal responsibility of an apprentice "mechanic
in training"? - Answer-Work under the supervision of a
mechanic
What code details provisions for maintaining minimum
standards for building construction? - Answer-NBCC
What is the final step in the process of standards
development according to the standards development
flowchart under the CSA organization? - Answer-
Maintenance
,2|Page
What approach is used to create standards in order to
promote fairness and utilize the expertise of interest
groups? - Answer-Balanced matrix approach
Which standard committee has the sole responsibility for
approving the technical content of a standard for the CSA
development process. - Answer-Technical committee
How many types of committees are involved in developing
content of standards for the CSA development
organizations? - Answer-3
Who is responsible for accrediting the CSA? - Answer-The
standards council of canada
What year did the A17.1 and CSA B44 harmonization
commence for North America? - Answer-1994
What is the result of the ASME A17.1/CSA B44
harmonization process? - Answer-A document that
contains the best requirements from both Canadian and
American codes
,3|Page
When was the first edition of ASME A17.1 code
published? - Answer-1921
When was the harmonization of the ASME A17.1 and the
CSA B44 completed? - Answer-2007
Where is the toe guard (apron) located? - Answer-Car
assembly
What is the main advantage of the traction elevator as
compared to the drum type elevator? - Answer-No height
restriction
What component is used to join two sections of guide
rails? - Answer-Fish plate
Where is the drive machine typically located for MRL
elevators? - Answer-Hoistway
How long have elevators been in existence? - Answer-
More than 2000 years
, 4|Page
Who is responsible for selecting the employees
representatives for a workers trade committee (JHSC) -
Answer-Workers
When was the first edition of the CSA B44 code
published? - Answer-1938
How often is the code book revised to a new edition in the
modern era? - Answer-3
How may a standard become mandatory making it a
code? - Answer-After being adopted by a government or
regulatory authority
How are sections of the ASME A17.1/CSA B44 code
broken down into further detail? - Answer-Sub-Sections
What two groupings are used to construct the code
identification system in the ASME A17.1/CSA B44? -
Answer-Parts and sections
How are revision changes denoted when appearing for the
first time in the ASME A17.1/CSA B44-10? - Answer-(10)
