cable tool rigs exam with answers

cable tool rigs exam with answers |\ |\ |\ |\ |\




cable tool drilling - CORRECT ANSWERS ✔✔striking and cutting
|\ |\ |\ |\ |\ |\ |\ |\ |\



action of the drill bit
|\ |\ |\ |\




spudder - CORRECT ANSWERS ✔✔center of the frame, and is
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\



supported by two bearings mounted on center i-beams
|\ |\ |\ |\ |\ |\ |\




What does the assembly of the spudder consist of? - CORRECT
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\



ANSWERS ✔✔1) two forged crank arms |\ |\ |\ |\ |\




2) two forged pitmans (which operate two spudder arms)
|\ |\ |\ |\ |\ |\ |\ |\




3) two spudder arms
|\ |\ |\




Bull Reel - CORRECT ANSWERS ✔✔1) raises and lowers drill
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\



string
2) engaged by clutch mounted on counter shaft
|\ |\ |\ |\ |\ |\ |\




3) has a divider the working and storage sides
|\ |\ |\ |\ |\ |\ |\ |\




sandline - CORRECT ANSWERS ✔✔hoist and lower bailer
|\ |\ |\ |\ |\ |\ |\




friction or chain driven from countershaft and mounted on anti-
|\ |\ |\ |\ |\ |\ |\ |\ |\



friction bearings |\

,mast - CORRECT ANSWERS ✔✔ranges from 36 ft to 60 ft
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\




wt. 15k to 45k
|\ |\ |\




pitman - CORRECT ANSWERS ✔✔connect the ends of the
|\ |\ |\ |\ |\ |\ |\ |\ |\



spudding beams |\




derrick head shock absorbers - CORRECT ANSWERS ✔✔rubber
|\ |\ |\ |\ |\ |\ |\ |\



discs located beneath the crown sheave
|\ |\ |\ |\ |\




countershaft - CORRECT ANSWERS ✔✔drives the bull reel, casing
|\ |\ |\ |\ |\ |\ |\ |\ |\



reel and spudder
|\ |\




catheads - CORRECT ANSWERS ✔✔clutch driven from the
|\ |\ |\ |\ |\ |\ |\ |\



countershaft, used for moving heavy materials |\ |\ |\ |\ |\




traveling blocks - CORRECT ANSWERS ✔✔is used with casing reel
|\ |\ |\ |\ |\ |\ |\ |\ |\



for handling casing
|\ |\ |\




three principle operations of cable tools? - CORRECT ANSWERS
|\ |\ |\ |\ |\ |\ |\ |\ |\



✔✔1) chiseling the formation
|\ |\ |\




2) remove cuttings
|\ |\

, 3) drive casing
|\ |\




how long should drill stem be? - CORRECT ANSWERS ✔✔it
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\



should not exceed half the height of the mast
|\ |\ |\ |\ |\ |\ |\ |\




true or false? it is better to use tools with a joint as large in diameter
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\



of the hole as long as weight limitation is not exceeded than in tool
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\



length - CORRECT ANSWERS ✔✔TRUE |\ |\ |\ |\




What is the most common swivel used? - CORRECT ANSWERS
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\



✔✔prosser swivel sockets |\ |\




two methods of setting swivel line - CORRECT ANSWERS ✔✔1)
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\



wet method |\




2) dry m,ethod
|\ |\




What is the wet method of setting swivel line? - CORRECT
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\



ANSWERS ✔✔a) tape line |\ |\ |\




b) place four inches from end of binder
|\ |\ |\ |\ |\ |\ |\




c) open up strands and clean with gasoline
|\ |\ |\ |\ |\ |\ |\




d) flared end pulled through
|\ |\ |\ |\




e) zinc is poured in
|\ |\ |\ |\