C of Q 310T Prep questions with
|\ |\ |\ |\ |\ |\ |\
answers
1. What procedure should be followed before using a bench grinder?
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\
a) Dress stone and set rest with minimum clearance of 3 mm (1/8").
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
b) Dress stone and set rest with maximum clearance of 1.6 mm
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
(1/16").
c) Set rest with minimum clearance of 3 mm (1/8") and dress stone.
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
d) Set rest with maximum clearance of 1.6 mm (1/16") and dress
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
stone. - CORRECT ANSWERS ✔✔b) Dress stone and set rest with
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
maximum clearance of 1.6 mm (1/16"). |\ |\ |\ |\ |\
2. What should be inspected on a chain sling before the technician
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
uses it? |\
a) Length and size.
|\ |\ |\
b) Bends and color.
|\ |\ |\
c) Elongation and twist.
|\ |\ |\
d) Date of manufacture and expiry date. - CORRECT ANSWERS
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\
✔✔c) Elongation and twist.
|\ |\ |\
,3. Where would a technician obtain information on a recurring
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\
problem?
a) Shop foreman.
|\ |\
b) The service manual.
|\ |\ |\
c) The operators manual.
|\ |\ |\
d) Technical service bulletins. - CORRECT ANSWERS ✔✔d)
|\ |\ |\ |\ |\ |\ |\ |\
Technical service bulletins |\ |\
4. What is the proper procedure to clean up a coolant spill?
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
a) Cover with floor dry.
|\ |\ |\ |\
b) Wash into floor drain.
|\ |\ |\ |\
c) Contain with a floor dam.
|\ |\ |\ |\ |\
d) Refer to MSDS information. - CORRECT ANSWERS ✔✔d) Refer
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\
to MSDS information
|\ |\
5. Where is the data link located on a highway tractor?
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\
a) Left side of glove box.
|\ |\ |\ |\ |\
b) In the fuse panel.
|\ |\ |\ |\
c) Beside the Electronic Control Unit.
|\ |\ |\ |\ |\
d) Left lower dash panel. - CORRECT ANSWERS ✔✔d) Left lower
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
dash panel.
|\
,6. What steps should be followed when utilizing Torque-to-Yield
|\ |\ |\ |\ |\ |\ |\ |\ |\
fasteners?
a) Lubricate threads and torque to specifications.
|\ |\ |\ |\ |\ |\
b) Rotate to specified degrees and torque to specifications.
|\ |\ |\ |\ |\ |\ |\ |\
c) Torque to specifications and rotate to specified degrees.
|\ |\ |\ |\ |\ |\ |\ |\
d) Tighten a specified number of degrees with an impact. -
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
CORRECT ANSWERS ✔✔c) Torque to specifications and rotate to
|\ |\ |\ |\ |\ |\ |\ |\ |\
specified degrees |\
7. What type of hose or tubing should be used on the compressor air
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
outlet?
|\
a) Nylon tubing.
|\ |\
b) Stainless steel tubing.
|\ |\ |\
c) Reinforced rubber air brake hose.
|\ |\ |\ |\ |\
d) Braided stainless steel with a Teflon inner lining. - CORRECT
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
ANSWERS ✔✔d) Braided stainless steel with a Teflon inner lining
|\ |\ |\ |\ |\ |\ |\ |\ |\
8. What type of seal would be considered as a static seal?
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
a) Oil filter seal.
|\ |\ |\
b) Rear wheel seal.
|\ |\ |\
c) Rear crankshaft seal.
|\ |\ |\
, d) Transmission output shaft seal. - CORRECT ANSWERS ✔✔a)
|\ |\ |\ |\ |\ |\ |\ |\ |\
Oil filter seal.
|\ |\
9. What would be indicated by engine oil contaminated with
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\
coolant?
a) Cracked dry liner.
|\ |\ |\
b) Leaking liner O-rings.
|\ |\ |\
c) Leaking oil cooler core.
|\ |\ |\ |\
d) Cracked liner counter-bore. - CORRECT ANSWERS ✔✔b)
|\ |\ |\ |\ |\ |\ |\ |\
Leaking liner O-rings.
|\ |\
10. What will cause excessive crankcase blow-by?
|\ |\ |\ |\ |\ |\
a) Worn oil control rings.
|\ |\ |\ |\
b) Excessive engine speed.
|\ |\ |\
c) Worn compression rings.
|\ |\ |\
d) A plugged crankcase filter. - CORRECT ANSWERS ✔✔c) Worn
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\
compression rings |\
11. What would be the cause of a failed cylinder head gasket?
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
a) Rolled liner O-rings.
|\ |\ |\
b) Cracked cylinder head.
|\ |\ |\
c) Insufficient liner height.
|\ |\ |\
|\ |\ |\ |\ |\ |\ |\
answers
1. What procedure should be followed before using a bench grinder?
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\
a) Dress stone and set rest with minimum clearance of 3 mm (1/8").
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
b) Dress stone and set rest with maximum clearance of 1.6 mm
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
(1/16").
c) Set rest with minimum clearance of 3 mm (1/8") and dress stone.
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
d) Set rest with maximum clearance of 1.6 mm (1/16") and dress
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
stone. - CORRECT ANSWERS ✔✔b) Dress stone and set rest with
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
maximum clearance of 1.6 mm (1/16"). |\ |\ |\ |\ |\
2. What should be inspected on a chain sling before the technician
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
uses it? |\
a) Length and size.
|\ |\ |\
b) Bends and color.
|\ |\ |\
c) Elongation and twist.
|\ |\ |\
d) Date of manufacture and expiry date. - CORRECT ANSWERS
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\
✔✔c) Elongation and twist.
|\ |\ |\
,3. Where would a technician obtain information on a recurring
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\
problem?
a) Shop foreman.
|\ |\
b) The service manual.
|\ |\ |\
c) The operators manual.
|\ |\ |\
d) Technical service bulletins. - CORRECT ANSWERS ✔✔d)
|\ |\ |\ |\ |\ |\ |\ |\
Technical service bulletins |\ |\
4. What is the proper procedure to clean up a coolant spill?
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
a) Cover with floor dry.
|\ |\ |\ |\
b) Wash into floor drain.
|\ |\ |\ |\
c) Contain with a floor dam.
|\ |\ |\ |\ |\
d) Refer to MSDS information. - CORRECT ANSWERS ✔✔d) Refer
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\
to MSDS information
|\ |\
5. Where is the data link located on a highway tractor?
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\
a) Left side of glove box.
|\ |\ |\ |\ |\
b) In the fuse panel.
|\ |\ |\ |\
c) Beside the Electronic Control Unit.
|\ |\ |\ |\ |\
d) Left lower dash panel. - CORRECT ANSWERS ✔✔d) Left lower
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
dash panel.
|\
,6. What steps should be followed when utilizing Torque-to-Yield
|\ |\ |\ |\ |\ |\ |\ |\ |\
fasteners?
a) Lubricate threads and torque to specifications.
|\ |\ |\ |\ |\ |\
b) Rotate to specified degrees and torque to specifications.
|\ |\ |\ |\ |\ |\ |\ |\
c) Torque to specifications and rotate to specified degrees.
|\ |\ |\ |\ |\ |\ |\ |\
d) Tighten a specified number of degrees with an impact. -
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
CORRECT ANSWERS ✔✔c) Torque to specifications and rotate to
|\ |\ |\ |\ |\ |\ |\ |\ |\
specified degrees |\
7. What type of hose or tubing should be used on the compressor air
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
outlet?
|\
a) Nylon tubing.
|\ |\
b) Stainless steel tubing.
|\ |\ |\
c) Reinforced rubber air brake hose.
|\ |\ |\ |\ |\
d) Braided stainless steel with a Teflon inner lining. - CORRECT
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
ANSWERS ✔✔d) Braided stainless steel with a Teflon inner lining
|\ |\ |\ |\ |\ |\ |\ |\ |\
8. What type of seal would be considered as a static seal?
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
a) Oil filter seal.
|\ |\ |\
b) Rear wheel seal.
|\ |\ |\
c) Rear crankshaft seal.
|\ |\ |\
, d) Transmission output shaft seal. - CORRECT ANSWERS ✔✔a)
|\ |\ |\ |\ |\ |\ |\ |\ |\
Oil filter seal.
|\ |\
9. What would be indicated by engine oil contaminated with
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\
coolant?
a) Cracked dry liner.
|\ |\ |\
b) Leaking liner O-rings.
|\ |\ |\
c) Leaking oil cooler core.
|\ |\ |\ |\
d) Cracked liner counter-bore. - CORRECT ANSWERS ✔✔b)
|\ |\ |\ |\ |\ |\ |\ |\
Leaking liner O-rings.
|\ |\
10. What will cause excessive crankcase blow-by?
|\ |\ |\ |\ |\ |\
a) Worn oil control rings.
|\ |\ |\ |\
b) Excessive engine speed.
|\ |\ |\
c) Worn compression rings.
|\ |\ |\
d) A plugged crankcase filter. - CORRECT ANSWERS ✔✔c) Worn
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\
compression rings |\
11. What would be the cause of a failed cylinder head gasket?
|\ |\ |\ |\ |\ |\ |\ |\ |\ |\ |\
a) Rolled liner O-rings.
|\ |\ |\
b) Cracked cylinder head.
|\ |\ |\
c) Insufficient liner height.
|\ |\ |\
