IPC J-STD-001J (Section 3) || 100% Correct Answers.

IPC J-STD-001J (Section 3) || 100% Correct Answers.
The materials and processes used to assemble/manufacturer electronic assemblies shall x1x2x3
be selected such that their use produces products acceptable to the standard. Sect 3.1 correct
answers D1D2D3


When major elements of a proven process are changed validation of the change shall x1x2x3 be
performed and documented. Sect 3.1 correct answers N1N2D3


When specified, manufacturers shall x1x2x3 have a Pb-free control plan. Sect 3.1 correct
answers D1D2D3


The Integrity of components shall x1x2x3 be retained after exposure to processes employed
during manufacture. Sect 3.1 correct answers D1D2D3


There shall x1x2x3 be a documented process to control materials, including consumable
materials that are subject to age degradation. Sect 3.1 correct answers N1D2D3


Limited shelf life items shall x1x2x3 be stored and controlled in accordance with the material
manufacturer's recommendations. Sect 3.1 correct answers N1D2D3


Materials shall x1x2x3 be processed per the material specification. Sect 3.1 correct answers
N1D2D3


Material shall x1x2x3 be used within the pot life specified by the material manufacturer. Sect 3.1
correct answers N1D2D3


When curing conditions vary from the material manufacturers recommend instructions, they
shall x1x2x3 be documented and available for review. Sect 3.1 correct answers N1D2D3


Items exposed to uncured silicone material shall not x1x2x3 be used for processing other
material. Sect 3.1 correct answers D1D2D3