Architecture Chapter 17-Fireplaces and Stoves || with 100% Correct
Answers.
wood correct answers Fireplaces may either be gas-fired or ___________ burning.
noncombustible correct answers The hearth should be made from __________ materials such as
ceramic, tile, or stone.
deep correct answers If the fireplace is giving off only a small amount of heat, then the fire
chamber is probably too ________.
shallow correct answers A fireplace that smokes into the room is likely to be the result of a fire
chamber that is too __________.
cleanout correct answers Ashes are removed from the ash chamber through the _____________.
sides, back correct answers The _________ and ___________ of a prefabricated steel heat
circulating fireplace are made with a double wall passage way where the air is heated.
Damper correct answers The _______ opens to the back of the fireplace throat.
damper correct answers The smoke shelf height is determined by the location of the _________.
chimney correct answers The flue starts at the top of the smoke chamber and proceeds to the top
of the ________________.
flue correct answers Each fireplace in a structure must have its own _____________.
Efficiency correct answers ______________is reduced when the flue is not straight.
, 1/10th correct answers A rule of thumb to follow in selecting the proper flue size is that the cross-
sectional area of the flue should be at least ______________ of the fireplace opening.
better correct answers A warmer chimney results in ______________ performance
free-standing correct answers The chimney does not support any part of the house; thus it is a
_______________ structure.
2" correct answers The recommended clearance for framing members around a chimney is
_____________ .
noncombustible correct answers The space between the chimney and the framing should be filled
with a __________ material.
minimized correct answers The chance of water problems is __________ if a chimney is placed
at the peak or ridge line of a roof.
saddle correct answers Wide chimneys or extremely low roof slopes usually require a
______________ along the chimney.
Single-face fireplace correct answers ________________ are the most popular type and the least
complicated to construct of all the fireplace types.
three-way correct answers The three-face fireplace is also referred to as a _______________
fireplace.
circulating correct answers The _______________ type of stove provides more even heat.
35% correct answers Medium efficiency stoves have less air leakage into the stove, have beer
combustion, and are _________________ to 50% efficient.
Answers.
wood correct answers Fireplaces may either be gas-fired or ___________ burning.
noncombustible correct answers The hearth should be made from __________ materials such as
ceramic, tile, or stone.
deep correct answers If the fireplace is giving off only a small amount of heat, then the fire
chamber is probably too ________.
shallow correct answers A fireplace that smokes into the room is likely to be the result of a fire
chamber that is too __________.
cleanout correct answers Ashes are removed from the ash chamber through the _____________.
sides, back correct answers The _________ and ___________ of a prefabricated steel heat
circulating fireplace are made with a double wall passage way where the air is heated.
Damper correct answers The _______ opens to the back of the fireplace throat.
damper correct answers The smoke shelf height is determined by the location of the _________.
chimney correct answers The flue starts at the top of the smoke chamber and proceeds to the top
of the ________________.
flue correct answers Each fireplace in a structure must have its own _____________.
Efficiency correct answers ______________is reduced when the flue is not straight.
, 1/10th correct answers A rule of thumb to follow in selecting the proper flue size is that the cross-
sectional area of the flue should be at least ______________ of the fireplace opening.
better correct answers A warmer chimney results in ______________ performance
free-standing correct answers The chimney does not support any part of the house; thus it is a
_______________ structure.
2" correct answers The recommended clearance for framing members around a chimney is
_____________ .
noncombustible correct answers The space between the chimney and the framing should be filled
with a __________ material.
minimized correct answers The chance of water problems is __________ if a chimney is placed
at the peak or ridge line of a roof.
saddle correct answers Wide chimneys or extremely low roof slopes usually require a
______________ along the chimney.
Single-face fireplace correct answers ________________ are the most popular type and the least
complicated to construct of all the fireplace types.
three-way correct answers The three-face fireplace is also referred to as a _______________
fireplace.
circulating correct answers The _______________ type of stove provides more even heat.
35% correct answers Medium efficiency stoves have less air leakage into the stove, have beer
combustion, and are _________________ to 50% efficient.
