Exterior Firefighter || All Solutions are Accurate.
Which load and carry works best when advancing hoseline up and down a stairway? correct
answers Minute man
Which of the following will cause the upper layer of hot smoke and fire gases to contract toward
the ceiling? correct answers Steam formed in the upper layer of hot fire gases
A short fold or reverse bend made in hose during the loading process is called a: correct answers
Dutchman
How should a single firefighter heel the ladder when performing a one-firefighter extension
ladder raise? correct answers Against the building
Which of the following is the most common type of lockset? correct answers Cylindrical lock
In order to apply forcible entry to an awning window, a firefighter must: correct answers Break
the glass or pry from the frame
Saws or saw blades should match the: correct answers Task and material
Which of the following design features is required for structural fire fighting protective coats by
NFPA 1971? correct answers Closure system
In what fire stage are burning fuels in the compartment releasing the maximum amount of heat
possible for available fuel and oxygen? correct answers Fully developed
which of the following statements about rotary control valves is the MOST accurate? correct
answers Rotary control valves control both the flow of water and the discharge pattern of the fire
stream
,Which of the following aluminum components can create an entanglement hazard? correct
answers Framing and support wires
What type of saw blade can be used to cut a dead bolt? correct answers Rotary saw blade
What thermal property of a compartment increases fire spread through the transfer of radiant heat
from wall surfaces to adjacent fuel sources? correct answers Heat reflectivity
Which preconnected hose load is designed to be pulled and advanced by one person and can be
carried on the shoulder, completely clear of the ground? correct answers Minuteman load
Which hose load is easiest to load and suitable for any size of supply hose? correct answers Flat
load
Ladders should be cleaned correct answers With soft bristle brush, running water, and mild soap
What type of NFPA defined cleaning is required when bodily fluids not removed by other
methods of cleaning are present? correct answers Specialized cleaning
What part of wildland PPE must close securely around boot tops? correct answers Trousers
Which load and carry works best when advancing hoseline up and down a stair way? correct
answers Minute man
How does a firefighter force an outward swinging door if the pins cannot be driven out using a
rambar or halligan? correct answers Break the hinges
Which of the following best describes the relationship needed for the release of potential
chemical energy in fuel? correct answers Thermal kinetic energy is needed to release it
, What type of structure is classified by its primary function when it contains multiple types of
uses? correct answers Single-use
To force entry on a door with a drop bar, insert the blade of a ____ into the opening and lift bar.
correct answers Handsaw
Which of the following best describes what a fire door label identifies? correct answers Door
type, hourly rating, and logo of testing laboratory
During fire fighting operations water is used to... correct answers Control burning gases and
reduce the temperature of the upper layer
Which of the following is a recommended cleaning practice after a chemical exposure? correct
answers Dispose of hose that cannot be decontaminated
What is the primary purpose of a spanner wrench? correct answers Tightening or loosening
couplings
In what mode of combustion is a smoldering glow on a materials surface produced? correct
answers Nonflaming
What part of structural fire fighting personal protective equipment assists in attempting to locate
trapped, unconscious, or incapacitated firefighters? correct answers PASS Device
Which of the following hose tools protects the hose from mechanical damage of dragging around
sharp corners? correct answers Hose roller
Which piece of protective breathing apparatus has all buckles, fasteners, and adjustments
inspected weekly to ensure proper operation? correct answers Backplate and harness assembly
Which load and carry works best when advancing hoseline up and down a stairway? correct
answers Minute man
Which of the following will cause the upper layer of hot smoke and fire gases to contract toward
the ceiling? correct answers Steam formed in the upper layer of hot fire gases
A short fold or reverse bend made in hose during the loading process is called a: correct answers
Dutchman
How should a single firefighter heel the ladder when performing a one-firefighter extension
ladder raise? correct answers Against the building
Which of the following is the most common type of lockset? correct answers Cylindrical lock
In order to apply forcible entry to an awning window, a firefighter must: correct answers Break
the glass or pry from the frame
Saws or saw blades should match the: correct answers Task and material
Which of the following design features is required for structural fire fighting protective coats by
NFPA 1971? correct answers Closure system
In what fire stage are burning fuels in the compartment releasing the maximum amount of heat
possible for available fuel and oxygen? correct answers Fully developed
which of the following statements about rotary control valves is the MOST accurate? correct
answers Rotary control valves control both the flow of water and the discharge pattern of the fire
stream
,Which of the following aluminum components can create an entanglement hazard? correct
answers Framing and support wires
What type of saw blade can be used to cut a dead bolt? correct answers Rotary saw blade
What thermal property of a compartment increases fire spread through the transfer of radiant heat
from wall surfaces to adjacent fuel sources? correct answers Heat reflectivity
Which preconnected hose load is designed to be pulled and advanced by one person and can be
carried on the shoulder, completely clear of the ground? correct answers Minuteman load
Which hose load is easiest to load and suitable for any size of supply hose? correct answers Flat
load
Ladders should be cleaned correct answers With soft bristle brush, running water, and mild soap
What type of NFPA defined cleaning is required when bodily fluids not removed by other
methods of cleaning are present? correct answers Specialized cleaning
What part of wildland PPE must close securely around boot tops? correct answers Trousers
Which load and carry works best when advancing hoseline up and down a stair way? correct
answers Minute man
How does a firefighter force an outward swinging door if the pins cannot be driven out using a
rambar or halligan? correct answers Break the hinges
Which of the following best describes the relationship needed for the release of potential
chemical energy in fuel? correct answers Thermal kinetic energy is needed to release it
, What type of structure is classified by its primary function when it contains multiple types of
uses? correct answers Single-use
To force entry on a door with a drop bar, insert the blade of a ____ into the opening and lift bar.
correct answers Handsaw
Which of the following best describes what a fire door label identifies? correct answers Door
type, hourly rating, and logo of testing laboratory
During fire fighting operations water is used to... correct answers Control burning gases and
reduce the temperature of the upper layer
Which of the following is a recommended cleaning practice after a chemical exposure? correct
answers Dispose of hose that cannot be decontaminated
What is the primary purpose of a spanner wrench? correct answers Tightening or loosening
couplings
In what mode of combustion is a smoldering glow on a materials surface produced? correct
answers Nonflaming
What part of structural fire fighting personal protective equipment assists in attempting to locate
trapped, unconscious, or incapacitated firefighters? correct answers PASS Device
Which of the following hose tools protects the hose from mechanical damage of dragging around
sharp corners? correct answers Hose roller
Which piece of protective breathing apparatus has all buckles, fasteners, and adjustments
inspected weekly to ensure proper operation? correct answers Backplate and harness assembly
