Neiep 830 Exam Questions with
Complete Solutions4
12 - ANSWERS-Although typically horizontal in design, the maximum angle of inclination for the
moving walk is ______ degrees
115,15 - ANSWERS-A ________ Volt , ______ amp outlet is required by asme for both the upper
and lower truss
True - ANSWERS-True or False Water run off must be seperated before the discharge into the
public drains
20 - ANSWERS-For drive motors that require overspeed protection, it must stop the systems if
speed exceeds ______ % of rated speed
Torque - ANSWERS-The nameplate on the brake must indicate the ________ setting
Drum - ANSWERS-The _______ brake is similar to the brake system found on gearless traction
elevators
Head end - ANSWERS-The drive end of a belted walkway is called the _______ ________
3000 - ANSWERS-The tensioning device on the tail end of the belted moving walk is normally set
at ______ lbs
Crab/circle - ANSWERS-The portion of the track system that guides the pallets around the turns
are called the ______ tracks
Complete Solutions4
12 - ANSWERS-Although typically horizontal in design, the maximum angle of inclination for the
moving walk is ______ degrees
115,15 - ANSWERS-A ________ Volt , ______ amp outlet is required by asme for both the upper
and lower truss
True - ANSWERS-True or False Water run off must be seperated before the discharge into the
public drains
20 - ANSWERS-For drive motors that require overspeed protection, it must stop the systems if
speed exceeds ______ % of rated speed
Torque - ANSWERS-The nameplate on the brake must indicate the ________ setting
Drum - ANSWERS-The _______ brake is similar to the brake system found on gearless traction
elevators
Head end - ANSWERS-The drive end of a belted walkway is called the _______ ________
3000 - ANSWERS-The tensioning device on the tail end of the belted moving walk is normally set
at ______ lbs
Crab/circle - ANSWERS-The portion of the track system that guides the pallets around the turns
are called the ______ tracks
