Questions With Correct Answers (Verified
Answers) Plus Rationales 2026 Q&A | Instant
Download Pdf
1. Which component is primarily responsible for controlling air
leakage in a building envelope?
A. Vapor barrier
B. Air barrier system
C. Thermal insulation
D. Drainage plane
Answer: B
Rationale: The air barrier system is specifically designed to resist
uncontrolled air movement through the building envelope, which is
critical for energy efficiency, comfort, and moisture control.
2. What is the primary purpose of insulation in a building envelope?
A. Stop air infiltration
B. Prevent water intrusion
,C. Reduce heat transfer
D. Increase structural strength
Answer: C
Rationale: Insulation slows conductive heat flow between conditioned
and unconditioned spaces, improving energy efficiency.
3. Which test is commonly used to measure air leakage in a home?
A. Infrared thermography
B. Blower door test
C. Smoke pencil test
D. Moisture meter test
Answer: B
Rationale: A blower door test depressurizes the home to measure air
leakage rates such as ACH50.
4. What does ACH50 represent?
A. Air changes per hour at 50 Pascals
B. Air conditioning hours at 50% load
C. Annual heating cycles at 50°F
D. Air cavity humidity at 50%
,Answer: A
Rationale: ACH50 measures how many times the air in a building is
replaced per hour under a pressure of 50 Pascals.
5. Which material is most commonly used as an air sealing product?
A. Fiberglass batt
B. Spray foam
C. Plywood sheathing
D. Concrete block
Answer: B
Rationale: Spray foam expands to seal cracks and gaps, making it
highly effective for air sealing.
6. Where are air leaks most commonly found in homes?
A. Solid interior walls
B. Attic penetrations and rim joists
C. Basement concrete slabs only
D. Exterior paint layers
, Answer: B
Rationale: Penetrations in attics and rim joists often contain gaps
around wiring, plumbing, and framing.
7. What is thermal bridging?
A. Heat transfer through insulation only
B. Moisture movement through vapor barriers
C. Heat flow through conductive building materials
D. Air leakage through duct systems
Answer: C
Rationale: Thermal bridging occurs when heat bypasses insulation
through more conductive materials like studs or steel.
8. Which of the following best describes vapor diffusion?
A. Movement of liquid water through cracks
B. Air movement caused by pressure differences
C. Movement of water vapor through materials
D. Heat transfer through convection