Page 1 of 14
CWB 47.1 EXAM | FREQUENTLY TESTED
QUESTIONS WITH CORRECT ANSWERS |
BRAND NEW!
What type of identification card is issued by the Canadian welding
bureau to welders who qualify for the vertical down process of
welding?
A) transferable
B) nontransferable
C) letter
D) no card is issued because the welder did not qualify on a
standard test assembly - ✔✔✔ Correct Answer > A
In what position must a welder be tested in order to qualify for
FW classification, class 0?
A) 1F
B) 1F, 2F
C) 2F, 3F, 4F
D) 1F, 2F, 3F, 4F - ✔✔✔ Correct Answer > C
, Page 2 of 14
What is the max fillet weld size that can be deposited on a FW
qualification test assembly?
A) 3 mm
B) 5 mm
C) 6 mm
D) 8 mm - ✔✔✔ Correct Answer > D
What portion of a standard SMAW welders test plate assembly is
radiographers if radiography is used to assess the welders test?
A) all 150 mm (6 in) of weld
B) centre 75 mm (3 in) of weld
C) centre 115 mm (4-1/2 in) of weld
D) outside 50 mm (2 in) of weld on both sides - ✔✔✔ Correct Answer >
C
Welding personnel qualification test assemblies cannot have a
specified min yield strength greater than?
A) 150 MPa (21 ksi)
B) 250 MPa (36 ksi)
C) 300 MPa (44 ksi)
D) 350 MPa (50 ksi) - ✔✔✔ Correct Answer > D
CWB 47.1 EXAM | FREQUENTLY TESTED
QUESTIONS WITH CORRECT ANSWERS |
BRAND NEW!
What type of identification card is issued by the Canadian welding
bureau to welders who qualify for the vertical down process of
welding?
A) transferable
B) nontransferable
C) letter
D) no card is issued because the welder did not qualify on a
standard test assembly - ✔✔✔ Correct Answer > A
In what position must a welder be tested in order to qualify for
FW classification, class 0?
A) 1F
B) 1F, 2F
C) 2F, 3F, 4F
D) 1F, 2F, 3F, 4F - ✔✔✔ Correct Answer > C
, Page 2 of 14
What is the max fillet weld size that can be deposited on a FW
qualification test assembly?
A) 3 mm
B) 5 mm
C) 6 mm
D) 8 mm - ✔✔✔ Correct Answer > D
What portion of a standard SMAW welders test plate assembly is
radiographers if radiography is used to assess the welders test?
A) all 150 mm (6 in) of weld
B) centre 75 mm (3 in) of weld
C) centre 115 mm (4-1/2 in) of weld
D) outside 50 mm (2 in) of weld on both sides - ✔✔✔ Correct Answer >
C
Welding personnel qualification test assemblies cannot have a
specified min yield strength greater than?
A) 150 MPa (21 ksi)
B) 250 MPa (36 ksi)
C) 300 MPa (44 ksi)
D) 350 MPa (50 ksi) - ✔✔✔ Correct Answer > D
