TEEX NFPA 1081 Exterior EXAM STUDY
GUIDE 2026/2027 COMPLETE QUESTIONS
WITH VERIFIED CORRECT ANSWERS ||
100% GUARANTEED PASS
<NEWEST VERSION>
1. The weighing of risk versus rewards is a practice referred to as __?__ -
ANSWER ✔ Risk management
2. The number one cause of death to firefighters is __?__ because of cycling of
the bodies. - ANSWER ✔ Heart attack
3. What is The leading cause of death among those in the fire fighting
profession? - ANSWER ✔ Stress / Heart attack
4. ACISD takes place after the incident has occurred and seeks to examine the
incident and resolve any long/term issues or problems. CSID may be
performed with the entire group or portion of the group conducting a
CHCISD may help to reduce stress levels of those involved - ANSWER ✔
Stress / Heart attack
5. Based on statistical data, the most common causes of how __?__ occur
include but are not limited to: stress/ over exertion. Vehicle collision, being
, struck by or making contact with an object, falling, being caught/trapped,
and collapsing. - ANSWER ✔ Fatal injuries
6. "If you don't know, don't go" for safety reasons, Responders should maintain
a distance of __?__ times the height of the area around the affected area -
ANSWER ✔ 1.5 times
7. Being aware of surroundings, pre-planning, conducting a detailed scene size
up, clearly marking excavations, and securing sewer grate or precautions
that can prevent what? - ANSWER ✔ Prevent Falls
8. If personnel cannot see their feet, they should be down low, and they should
be tied off, if they owe more than __?__ feet off the ground. - ANSWER ✔ 6
feet
9. The Collabs zone should be __?__ times the height of the structure. -
ANSWER ✔ 1.5
10.Exposure to products of combustion can also be a cause of death the
products of combustion or what three things? - ANSWER ✔ Smoke
Heat
Gas
11.What are the three basic types of affective fire streams? - ANSWER ✔ 1.)
straight stream
2.) full fog
3.) power cone
, 12.The part of pressure that is used to overcome friction in the hose is? -
ANSWER ✔ Friction loss
13.The mechanical energy available to force the water or Agent through the
hose and nozzle assembly; usually measured in psi? - ANSWER ✔ Pressure
14.The volume of water that leaves a hose or nozzle; usually measured and
GPM? - ANSWER ✔ Flow
15.The pressure in a system after water has begun flowing? - ANSWER ✔
Residual pressure
16.What is pressure in a system without water flowing? - ANSWER ✔ Static
pressure
17.What is Pressure required for effective nozzle operation and related to flow
in reach; typical nozzle pressures are as follows:
• Fog nozzles 100 psi
• Smooth - bore nozzle 50 psi
• Smooth- bore master stream nozzle 80 psi - ANSWER ✔ Nozzle
pressure
18.The distance water will travel after leaving the nozzle; measured in feet;
affected by the shape, pressure, wind direction, gravity and friction loss and
hose. - ANSWER ✔ Reach
GUIDE 2026/2027 COMPLETE QUESTIONS
WITH VERIFIED CORRECT ANSWERS ||
100% GUARANTEED PASS
<NEWEST VERSION>
1. The weighing of risk versus rewards is a practice referred to as __?__ -
ANSWER ✔ Risk management
2. The number one cause of death to firefighters is __?__ because of cycling of
the bodies. - ANSWER ✔ Heart attack
3. What is The leading cause of death among those in the fire fighting
profession? - ANSWER ✔ Stress / Heart attack
4. ACISD takes place after the incident has occurred and seeks to examine the
incident and resolve any long/term issues or problems. CSID may be
performed with the entire group or portion of the group conducting a
CHCISD may help to reduce stress levels of those involved - ANSWER ✔
Stress / Heart attack
5. Based on statistical data, the most common causes of how __?__ occur
include but are not limited to: stress/ over exertion. Vehicle collision, being
, struck by or making contact with an object, falling, being caught/trapped,
and collapsing. - ANSWER ✔ Fatal injuries
6. "If you don't know, don't go" for safety reasons, Responders should maintain
a distance of __?__ times the height of the area around the affected area -
ANSWER ✔ 1.5 times
7. Being aware of surroundings, pre-planning, conducting a detailed scene size
up, clearly marking excavations, and securing sewer grate or precautions
that can prevent what? - ANSWER ✔ Prevent Falls
8. If personnel cannot see their feet, they should be down low, and they should
be tied off, if they owe more than __?__ feet off the ground. - ANSWER ✔ 6
feet
9. The Collabs zone should be __?__ times the height of the structure. -
ANSWER ✔ 1.5
10.Exposure to products of combustion can also be a cause of death the
products of combustion or what three things? - ANSWER ✔ Smoke
Heat
Gas
11.What are the three basic types of affective fire streams? - ANSWER ✔ 1.)
straight stream
2.) full fog
3.) power cone
, 12.The part of pressure that is used to overcome friction in the hose is? -
ANSWER ✔ Friction loss
13.The mechanical energy available to force the water or Agent through the
hose and nozzle assembly; usually measured in psi? - ANSWER ✔ Pressure
14.The volume of water that leaves a hose or nozzle; usually measured and
GPM? - ANSWER ✔ Flow
15.The pressure in a system after water has begun flowing? - ANSWER ✔
Residual pressure
16.What is pressure in a system without water flowing? - ANSWER ✔ Static
pressure
17.What is Pressure required for effective nozzle operation and related to flow
in reach; typical nozzle pressures are as follows:
• Fog nozzles 100 psi
• Smooth - bore nozzle 50 psi
• Smooth- bore master stream nozzle 80 psi - ANSWER ✔ Nozzle
pressure
18.The distance water will travel after leaving the nozzle; measured in feet;
affected by the shape, pressure, wind direction, gravity and friction loss and
hose. - ANSWER ✔ Reach
