Verified Answers |Latest Version |Already Graded A+
When performing the handline nozzle test, you must discharge foam onto a paved surface for a
period of ________ seconds ✔Correct Answer-30 seconds
The Application rate of Class B foam is given in: ✔Correct Answer-Gallons per minute per
square foot
When performing the turret ground pattern test, disregard any foam that is less than:
✔Correct Answer-1/2-inch deep
The fire apparatus test record that evaluates the overall performance of an ARFF apparatus is
used on a ______ basis ✔Correct Answer-Yearly
Identify TWO defensive driving exercises that must be performed as part of the driving section
of the performance test. ✔Correct Answer-Straight line driving and stopping Procedures;
Lane Changes
All of the following statements about the importance of preventive maintenance are TRUE
EXCEPT that it: ✔Correct Answer-Decreases the amount of wear and tear
Identify THREE TRUE statements about dry chemicals ✔Correct Answer-- They are usually
applied through hand lines
-They are not effective for preventing flashback
-They are useful on running fuel fires and three- dimensional fires
Identify THREE common requirements that need to be followed when driving/operating an
ARFF apparatus. ✔Correct Answer--Fire Department Rules and Regulations
-NFPA requirements
-Federal, State and local laws
The Device most commonly used to extinguish a peripheral fire after rescue operations are
complete is the: ✔Correct Answer-Hand Line
Identify THREE advantages of balanced pressure foam proportioning systems ✔Correct
Answer--There is no water intake pressure
-Water and foam can simultaneously be discharged from separate outlets
-Various percentages of foam solutions can be discharged from multiple discharge outlets
In low-energy systems, air is introduced into the foam solution at or just after the solution
leaves the: ✔Correct Answer-Nozzle
, The foam application method used for an ignited pool of liquid fuel located on open ground is
the: ✔Correct Answer-Roll-On Method
The agent delivery device most commonly found on ARFF apparatus is the: ✔Correct Answer-
Turret
All of the following affect the apparatus positioning at a crash site EXCEPT: ✔Correct Answer-
Time of Day
All of the following statements about the application of dry chemical on a Class B fire are TRUE
EXCEPT: ✔Correct Answer-The use of dry chemical agents reduces the chance of flashback
The CTIS equipped on an ARFF apparatus can be used: ✔Correct Answer-When the apparatus
is moving or stationary
An Instrument Landing System (ILS) critical area sign has a white inscription on a red
background and is a: ✔Correct Answer-Mandatory Instruction Sign
Identify THREE items that should be included on a weekly fire apparatus record. ✔Correct
Answer--pump pressure control device
-foam transfer pump
-intake strainers
Identify the TRUE statement about the expansion and drainage test ✔Correct Answer-The
object of test method B is to obtain a sample of foam that is typical of that to be applied to the
burning fuel surface under anticipated fire conditions.
Identify TWO TRUE statements about the confined space turnaround exercise. ✔Correct
Answer--A spotter is required
-There are an unlimited amount of direction changes allowed
Identify THREE controls that may be used to operate the bumper turret ✔Correct Answer--
Oscillation Control
-Discharge Pattern Control
-Control Handle
All of the following are low-energy foam proportioning system EXCEPT: ✔Correct Answer-
Compressed Air
The Ramp temperature at an airport is typically ______ higher than the ambient air
temperature. ✔Correct Answer-25 to 45 degrees