Page 1 of 41
OSHA 510 TEST VERSION B EXAM WITH
COMPLETE
QUESTIONS AND CORRECT DETAILED
ANSWERS LATEST UPDATE TESTED AND
GRADED A+
when _____ is/are used perpendicular to a roof edge, the warning lines cannot be
closer than ft. - ANSWER: mechanical equipment
A ___ deals with the cord-set and receptacles which are not part of the permanent
wiring of a building or structure - ANSWER: assured equipment grounding
conductor program
electrical equipment that operates at 50 volts or higher shall be ___ against
accident contact. - ANSWER: Guarded
subpart V states that work to be preformed that is __ shall have a job briefing held
before the start of day or shift - ANSWER: repetitive or similar
,Page 2 of 41
Bonding is the practice of connecting two ___ objects to prevent static sparks -
ANSWER: metallic
when scaffolding is being erected, moved, dismantled, or altered it shall be ___ by
competent person. - ANSWER: Supervised
Top rail of a guardrail system must be 42 inches +/- _____ above a walking/
working level - ANSWER: 3 inches
a sandy clay loam that has an unconfined compressive strength of 1.2 tsf would be
classified as - ANSWER: Class B soil
Type A soil can be sloped 1/1:2 ration if the excavation is open less than___ and is
less than 12 feet in depth - ANSWER: 24 hours
cross bracing on scaffolding is acceptable as a midrail when the cross point is 2030
inches above the walking surface and - ANSWER: end point are less than 48
inches apart
The results of work place injury and illness may include: - ANSWER: lower
morale and increase cost to train and replace workers
,Page 3 of 41
Osha Mission is to - ANSWER: Protect the safety and health of American workers
The right of workers to seek safety and health on the job without fear of
punishment can be found in? - ANSWER: section (c) of the OSHA ACT
when was the OSHA Act sign into law? - ANSWER: 1970
The employers responsibility to provide a workplace free from recognized safety
and health hazard is also know as - ANSWER: General Duty Clause
Horizontal standards apply: - ANSWER: When a condition is not covered by a
specific industry standard
Vertical Standards apply: - ANSWER: Only applies to specific industry standards.
Horizontal Ex: - ANSWER: working surface, fire protection, and first aid
vertical ex: - ANSWER: Longshore or construction industry
, Page 4 of 41
The purpose of OSHA Directives, including enforcement and compliance
directives CPL is to: - ANSWER: ensure consistent enforcement of OSHA
regulation
OSHA requires that employees certify that abetment is complete: - ANSWER: for
each cited violation
An example of incident Cost would be? - ANSWER: Overtime worked to keep on
schedule due to accident
Protect the safety and health of America's workers is the mission of what the
government agrees - ANSWER: OSHA
The General duty clause states that it is the employers responsibility to provide a
workspace free from - ANSWER: recognized hazards
To ensure consistent enforcement OSHA has set up? - ANSWER: OSHA
Directives
OSHA 510 TEST VERSION B EXAM WITH
COMPLETE
QUESTIONS AND CORRECT DETAILED
ANSWERS LATEST UPDATE TESTED AND
GRADED A+
when _____ is/are used perpendicular to a roof edge, the warning lines cannot be
closer than ft. - ANSWER: mechanical equipment
A ___ deals with the cord-set and receptacles which are not part of the permanent
wiring of a building or structure - ANSWER: assured equipment grounding
conductor program
electrical equipment that operates at 50 volts or higher shall be ___ against
accident contact. - ANSWER: Guarded
subpart V states that work to be preformed that is __ shall have a job briefing held
before the start of day or shift - ANSWER: repetitive or similar
,Page 2 of 41
Bonding is the practice of connecting two ___ objects to prevent static sparks -
ANSWER: metallic
when scaffolding is being erected, moved, dismantled, or altered it shall be ___ by
competent person. - ANSWER: Supervised
Top rail of a guardrail system must be 42 inches +/- _____ above a walking/
working level - ANSWER: 3 inches
a sandy clay loam that has an unconfined compressive strength of 1.2 tsf would be
classified as - ANSWER: Class B soil
Type A soil can be sloped 1/1:2 ration if the excavation is open less than___ and is
less than 12 feet in depth - ANSWER: 24 hours
cross bracing on scaffolding is acceptable as a midrail when the cross point is 2030
inches above the walking surface and - ANSWER: end point are less than 48
inches apart
The results of work place injury and illness may include: - ANSWER: lower
morale and increase cost to train and replace workers
,Page 3 of 41
Osha Mission is to - ANSWER: Protect the safety and health of American workers
The right of workers to seek safety and health on the job without fear of
punishment can be found in? - ANSWER: section (c) of the OSHA ACT
when was the OSHA Act sign into law? - ANSWER: 1970
The employers responsibility to provide a workplace free from recognized safety
and health hazard is also know as - ANSWER: General Duty Clause
Horizontal standards apply: - ANSWER: When a condition is not covered by a
specific industry standard
Vertical Standards apply: - ANSWER: Only applies to specific industry standards.
Horizontal Ex: - ANSWER: working surface, fire protection, and first aid
vertical ex: - ANSWER: Longshore or construction industry
, Page 4 of 41
The purpose of OSHA Directives, including enforcement and compliance
directives CPL is to: - ANSWER: ensure consistent enforcement of OSHA
regulation
OSHA requires that employees certify that abetment is complete: - ANSWER: for
each cited violation
An example of incident Cost would be? - ANSWER: Overtime worked to keep on
schedule due to accident
Protect the safety and health of America's workers is the mission of what the
government agrees - ANSWER: OSHA
The General duty clause states that it is the employers responsibility to provide a
workspace free from - ANSWER: recognized hazards
To ensure consistent enforcement OSHA has set up? - ANSWER: OSHA
Directives
