OSHA 10-HOUR FINAL EXAM WITH
QUESTIONS AND CORRECT VERIFIED
SOLUTIONS EXAMS OF NURSING 3 LATEST
VERSIONS NEW MODIFIED
"When there might be an electrical hazard, OSHA recommends a threestage safety model." -
CORRECT ANSWER✔✔Recognize, evaluate, and control.
"Operators must complete three separate aspects of powered industrial truck training: formal
training, practice training, and ...?" - CORRECT
ANSWER✔✔Evaluation.
"The greatest hazard posed by hand tools results from ...?" - CORRECT
ANSWER✔✔Misuse and improper maintenance.
"The first step in building a scaffold is to ...?" - CORRECT
ANSWER✔✔Conduct a site inspection.
"Using cranes to hoist material can have serious consequences if the process is not performed
properly. Because of this, the following is required." - CORRECT ANSWER✔✔All of the
above.
"Most OSHA electrical safety guidelines and regulations for construction are contained in
Subpart K, 29 CFR 1926, which is based on ...?" - CORRECT
Page 1 of 60
,ANSWER✔✔The National Electrical Code.
"Facilities must be provided for flushing and neutralizing spilled electrolytes when changing
or recharging the batter of a powered industrial truck in order to ...?" - CORRECT
ANSWER✔✔All of the above.
"The four main causes or crane accidents are contact with power lines, overturns, falls and
mechanical failure. Two other errors mentioned in this module that often lead to trouble are
...?" - CORRECT ANSWER✔✔Improper maintenance and failure to conduct regular
inspections.
"One of the most important elements of pre-job planning for a demolitions operations is ...?" -
CORRECT ANSWER✔✔The location of all utility services.
"OSHA's Hazard Communication Standard HCS) is designed to ensure that information
about ...
and associated protective measures is disseminated." - CORRECT ANSWER✔✔Hazardous
chemicals.
OSHA's mission is to: - CORRECT ANSWER✔✔Protect the safety and health of America's
workers.
The creation of OSHA provided this important right to workers: - CORRECT
ANSWER✔✔The right to a safe and healthful workplace.
OSHA requires that employers pay for most required personal protective equipment (PPE),
including: - CORRECT ANSWER✔✔Hard hats.
Page 2 of 60
,What type of OSHA inspection is conducted when immediate death or serious harm is likely?
- CORRECT ANSWER✔✔Imminent danger
When working over dangerous equipment and machinery, fall protection must be provided
__________. - CORRECT ANSWER✔✔Regardless of distance
Falls, struck-by object, caught-in or between, and electrocution are referred to by OSHA as -
CORRECT ANSWER✔✔Focus Four Hazards
Overreaching is a factor that contributes to falls or fatalities involving ladder usage. -
CORRECT ANSWER✔✔True
More ________ are killed from falls than in any other construction occupation. - CORRECT
ANSWER✔✔Ironworkers
Caught in or -between hazards are related with excavations [trenches]; therefore, the hazard
considered to be the greatest risk is: - CORRECT
ANSWER✔✔Cave-ins
To protect against caught-in or -between hazards, a worker should not only avoid wearing
loose clothing or jewelry, but also a worker should avoid: - CORRECT
ANSWER✔✔Working with equipment/machinery that has not been locked-out
Page 3 of 60
, To prevent being pinned between equipment or other objects, workers should avoid -
CORRECT ANSWER✔✔Placing themselves between moving vehicles and an immovable
structure, vehicle, or stacked materials
Workers should wear a ________ if required, to avoid being thrown from a vehicle and
crushed as the vehicle tips over. - CORRECT
ANSWER✔✔seatbelt
All hand-held power tools should have guards and _______ on them. -
CORRECT ANSWER✔✔Safety switches
Which of the following are ways employers must protect their employees on the job site? -
CORRECT ANSWER✔✔All of the above
What type of correctional program is used to plan the best way to control or prevent hazards
in the event of an emergency? - CORRECT
ANSWER✔✔Emergency preparation
When using industrial fork-lifts, the load must be at the lowest position for traveling, and the
truck manufacturer's operational requirements must be followed. - CORRECT
ANSWER✔✔True
When traveling on a fork lift, the carried load must be at the highest feasible position during
travel. - CORRECT ANSWER✔✔False
Appropriate switches for belt sanders are: - CORRECT
Page 4 of 60
QUESTIONS AND CORRECT VERIFIED
SOLUTIONS EXAMS OF NURSING 3 LATEST
VERSIONS NEW MODIFIED
"When there might be an electrical hazard, OSHA recommends a threestage safety model." -
CORRECT ANSWER✔✔Recognize, evaluate, and control.
"Operators must complete three separate aspects of powered industrial truck training: formal
training, practice training, and ...?" - CORRECT
ANSWER✔✔Evaluation.
"The greatest hazard posed by hand tools results from ...?" - CORRECT
ANSWER✔✔Misuse and improper maintenance.
"The first step in building a scaffold is to ...?" - CORRECT
ANSWER✔✔Conduct a site inspection.
"Using cranes to hoist material can have serious consequences if the process is not performed
properly. Because of this, the following is required." - CORRECT ANSWER✔✔All of the
above.
"Most OSHA electrical safety guidelines and regulations for construction are contained in
Subpart K, 29 CFR 1926, which is based on ...?" - CORRECT
Page 1 of 60
,ANSWER✔✔The National Electrical Code.
"Facilities must be provided for flushing and neutralizing spilled electrolytes when changing
or recharging the batter of a powered industrial truck in order to ...?" - CORRECT
ANSWER✔✔All of the above.
"The four main causes or crane accidents are contact with power lines, overturns, falls and
mechanical failure. Two other errors mentioned in this module that often lead to trouble are
...?" - CORRECT ANSWER✔✔Improper maintenance and failure to conduct regular
inspections.
"One of the most important elements of pre-job planning for a demolitions operations is ...?" -
CORRECT ANSWER✔✔The location of all utility services.
"OSHA's Hazard Communication Standard HCS) is designed to ensure that information
about ...
and associated protective measures is disseminated." - CORRECT ANSWER✔✔Hazardous
chemicals.
OSHA's mission is to: - CORRECT ANSWER✔✔Protect the safety and health of America's
workers.
The creation of OSHA provided this important right to workers: - CORRECT
ANSWER✔✔The right to a safe and healthful workplace.
OSHA requires that employers pay for most required personal protective equipment (PPE),
including: - CORRECT ANSWER✔✔Hard hats.
Page 2 of 60
,What type of OSHA inspection is conducted when immediate death or serious harm is likely?
- CORRECT ANSWER✔✔Imminent danger
When working over dangerous equipment and machinery, fall protection must be provided
__________. - CORRECT ANSWER✔✔Regardless of distance
Falls, struck-by object, caught-in or between, and electrocution are referred to by OSHA as -
CORRECT ANSWER✔✔Focus Four Hazards
Overreaching is a factor that contributes to falls or fatalities involving ladder usage. -
CORRECT ANSWER✔✔True
More ________ are killed from falls than in any other construction occupation. - CORRECT
ANSWER✔✔Ironworkers
Caught in or -between hazards are related with excavations [trenches]; therefore, the hazard
considered to be the greatest risk is: - CORRECT
ANSWER✔✔Cave-ins
To protect against caught-in or -between hazards, a worker should not only avoid wearing
loose clothing or jewelry, but also a worker should avoid: - CORRECT
ANSWER✔✔Working with equipment/machinery that has not been locked-out
Page 3 of 60
, To prevent being pinned between equipment or other objects, workers should avoid -
CORRECT ANSWER✔✔Placing themselves between moving vehicles and an immovable
structure, vehicle, or stacked materials
Workers should wear a ________ if required, to avoid being thrown from a vehicle and
crushed as the vehicle tips over. - CORRECT
ANSWER✔✔seatbelt
All hand-held power tools should have guards and _______ on them. -
CORRECT ANSWER✔✔Safety switches
Which of the following are ways employers must protect their employees on the job site? -
CORRECT ANSWER✔✔All of the above
What type of correctional program is used to plan the best way to control or prevent hazards
in the event of an emergency? - CORRECT
ANSWER✔✔Emergency preparation
When using industrial fork-lifts, the load must be at the lowest position for traveling, and the
truck manufacturer's operational requirements must be followed. - CORRECT
ANSWER✔✔True
When traveling on a fork lift, the carried load must be at the highest feasible position during
travel. - CORRECT ANSWER✔✔False
Appropriate switches for belt sanders are: - CORRECT
Page 4 of 60
