OSHA 510 EXAM WITH QUESTIONS
AND CORRECT VERIFIED ANSWERS
LATEST UPDATED EXAM
Three parts of an OSHA inspection are - CORRECT ANSWER>>1. Opening
conference
2. Worksite "Walk-around"
3. Closing Conference
Opening conference - CORRECT ANSWER>>brief meeting during which the
OSHA inspector will explain the purpose of the inspection
Worksite "Walk-around" - CORRECT ANSWER>>walk around and see if
there are any inspections; might take pictures and notes during the inspection
Closing conference - CORRECT ANSWER>>the inspector will disclose any
hazards or violations identified during the course of the inspector, as well as any
possible violations the organization may face; citations and fines are not
discussed
Only _____ companies may have a focused OSHA inspection. - CORRECT
ANSWER>>construction
Page 1 of 18
,When the OSHA CSHO arrives at a site to conduct a focused inspection, they
will determine: - CORRECT ANSWER>>1. whether there is a project
coordination by the general contractor
2. review the projects safety and health program for adequacy
3. determine if there is a competent person
1. During crane operations when signaling is required, if the signals are
interrupted the crane operator should __ - CORRECT ANSWER>>safely stop
operations requiring signals until they are
__ is responsible to train signal persons to meet the 1926.1428 standard. -
CORRECT ANSWER>>the employer
1. The material used in rollover protection structures must have the capability of
performing at __ Fahrenheit. - CORRECT ANSWER>>0 degrees
1. The operator training requirements for rough-terrain industrial trucks
used in the construction industry are covered under OSHA standard__ -
CORRECT ANSWER>>1910.178 powered industrial trucks
OSHA stands for - CORRECT ANSWER>>Occupational Safety and Health
Page 2 of 18
, Administration
OSHA's focus four injuries are: - CORRECT ANSWER>>1. fall
2. caught-in
3. struck by
4. electrical
OSHA's mission is to _____ and _____. - CORRECT ANSWER>>save lives
and prevent injuries
OSHA's primary method of enforcement of safety regulations is through _____.
- CORRECT ANSWER>>worksite inspections
OSHA was formed because _____ were increasing. - CORRECT
ANSWER>>injuries and illnesses
OSHA was signed into law by President _____ in December of _____. -
CORRECT
ANSWER>>Nixon; 1970
In the correct order, what is OSHA's inspection priority? - CORRECT
ANSWER>>1.
imminent danger
Page 3 of 18
AND CORRECT VERIFIED ANSWERS
LATEST UPDATED EXAM
Three parts of an OSHA inspection are - CORRECT ANSWER>>1. Opening
conference
2. Worksite "Walk-around"
3. Closing Conference
Opening conference - CORRECT ANSWER>>brief meeting during which the
OSHA inspector will explain the purpose of the inspection
Worksite "Walk-around" - CORRECT ANSWER>>walk around and see if
there are any inspections; might take pictures and notes during the inspection
Closing conference - CORRECT ANSWER>>the inspector will disclose any
hazards or violations identified during the course of the inspector, as well as any
possible violations the organization may face; citations and fines are not
discussed
Only _____ companies may have a focused OSHA inspection. - CORRECT
ANSWER>>construction
Page 1 of 18
,When the OSHA CSHO arrives at a site to conduct a focused inspection, they
will determine: - CORRECT ANSWER>>1. whether there is a project
coordination by the general contractor
2. review the projects safety and health program for adequacy
3. determine if there is a competent person
1. During crane operations when signaling is required, if the signals are
interrupted the crane operator should __ - CORRECT ANSWER>>safely stop
operations requiring signals until they are
__ is responsible to train signal persons to meet the 1926.1428 standard. -
CORRECT ANSWER>>the employer
1. The material used in rollover protection structures must have the capability of
performing at __ Fahrenheit. - CORRECT ANSWER>>0 degrees
1. The operator training requirements for rough-terrain industrial trucks
used in the construction industry are covered under OSHA standard__ -
CORRECT ANSWER>>1910.178 powered industrial trucks
OSHA stands for - CORRECT ANSWER>>Occupational Safety and Health
Page 2 of 18
, Administration
OSHA's focus four injuries are: - CORRECT ANSWER>>1. fall
2. caught-in
3. struck by
4. electrical
OSHA's mission is to _____ and _____. - CORRECT ANSWER>>save lives
and prevent injuries
OSHA's primary method of enforcement of safety regulations is through _____.
- CORRECT ANSWER>>worksite inspections
OSHA was formed because _____ were increasing. - CORRECT
ANSWER>>injuries and illnesses
OSHA was signed into law by President _____ in December of _____. -
CORRECT
ANSWER>>Nixon; 1970
In the correct order, what is OSHA's inspection priority? - CORRECT
ANSWER>>1.
imminent danger
Page 3 of 18
