NEW OSHA 510 EXAM FINAL STUDY GUIDE
QUESTIONS
WITH CORRECT VERIFIED SOLUTIONS AND
RATIONALES LATEST UPDATED
According to "The Act, What is the mission of OSHA? - CORRECT
ANSWER>>(Protect American Workers) -
To assure safe and healthful working conditions for working men and women
by setting and enforcing standards and by providing training, outreach,
education and assistance.
True or False: Section 11(C) of the OSH Act States:
Employers shall furnish to each employees a place of employment which are
free from recognized hazards? - CORRECT ANSWER>>False - Employees
are protected from retaliation for raising workplace health and safety concerns
and for reporting work-related injuries and illnesses with OSHA
(Without Fear of Punishment)
What is the Horizontal Standard? - CORRECT ANSWER>>Meaning "general"
or across the board
Page 1 of 14
, True or False: OSHA directives including Enforcement and Compliance
directives ensures consistent enforcement of OSHA regulations - CORRECT
ANSWER>>(True) - OSHA directives including (Enforcement and Compliance
Directives)
True or False: If not corrected and documented at time of inspection, the
employers must certify that abatement is completed for each cited violation? -
CORRECT ANSWER>>(True) - 1903.19(c)(3)
The employer's certification that abatement is complete must include, for each
cited violation, in addition to the information required by paragraph (h) of this
section, the date and method of abatement and a statement that affected
employees and their representatives have been informed of the abatement.
Define Creating Employer - CORRECT ANSWER>>The employer that caused
a hazardous condition that violates an OSHA standard.
How do you protect employee and other employees vision in the vicinity during
Arc Welding operations? - CORRECT ANSWER>>1926.351(e)
("Shielding"). Whenever practicable, all arc welding and cutting operations
shall be shielded by noncombustible or flameproof screens which will protect
employees and other persons working in the vicinity from the direct rays of the
arc.
True or False: Failure to inspect oil or grease on regulator fitting, valves or cap
threads on a oxygen cylinder can result in fire or explosion. - CORRECT
Page 2 of 14
QUESTIONS
WITH CORRECT VERIFIED SOLUTIONS AND
RATIONALES LATEST UPDATED
According to "The Act, What is the mission of OSHA? - CORRECT
ANSWER>>(Protect American Workers) -
To assure safe and healthful working conditions for working men and women
by setting and enforcing standards and by providing training, outreach,
education and assistance.
True or False: Section 11(C) of the OSH Act States:
Employers shall furnish to each employees a place of employment which are
free from recognized hazards? - CORRECT ANSWER>>False - Employees
are protected from retaliation for raising workplace health and safety concerns
and for reporting work-related injuries and illnesses with OSHA
(Without Fear of Punishment)
What is the Horizontal Standard? - CORRECT ANSWER>>Meaning "general"
or across the board
Page 1 of 14
, True or False: OSHA directives including Enforcement and Compliance
directives ensures consistent enforcement of OSHA regulations - CORRECT
ANSWER>>(True) - OSHA directives including (Enforcement and Compliance
Directives)
True or False: If not corrected and documented at time of inspection, the
employers must certify that abatement is completed for each cited violation? -
CORRECT ANSWER>>(True) - 1903.19(c)(3)
The employer's certification that abatement is complete must include, for each
cited violation, in addition to the information required by paragraph (h) of this
section, the date and method of abatement and a statement that affected
employees and their representatives have been informed of the abatement.
Define Creating Employer - CORRECT ANSWER>>The employer that caused
a hazardous condition that violates an OSHA standard.
How do you protect employee and other employees vision in the vicinity during
Arc Welding operations? - CORRECT ANSWER>>1926.351(e)
("Shielding"). Whenever practicable, all arc welding and cutting operations
shall be shielded by noncombustible or flameproof screens which will protect
employees and other persons working in the vicinity from the direct rays of the
arc.
True or False: Failure to inspect oil or grease on regulator fitting, valves or cap
threads on a oxygen cylinder can result in fire or explosion. - CORRECT
Page 2 of 14
