S-12 Citywide Sprinkler Systems Exam 2026/2027
FDNY Certificate of Fitness | Questions with Verified
Answers and Detailed Rationales.
Question 1
What is the Response Time Index (RTI) of a standard sprinkler?
A. 50
B. 80
C. 100
D. 120
Correct Answer: B. 80
Rationale: A standard sprinkler has an RTI of 80. Quick response sprinklers have an
RTI of 50. RTI measures how quickly a sprinkler activates in response to heat.
Question 2
Which type of sprinkler system has open heads?
A. Wet pipe system
B. Dry pipe system
,2|Page
C. Pre-action system
D. Deluge system
Correct Answer: D. Deluge system
Rationale: A deluge system has all sprinkler heads open. The pipes are dry until a
detection system activates, releasing water through all heads simultaneously.
Question 3
What instrument is used to check the freezing point of antifreeze solutions?
A. Thermometer
B. Hydrometer or refractometer
C. Manometer
D. Pressure gauge
Correct Answer: B. Hydrometer or refractometer
Rationale: A hydrometer or refractometer is used to check the freezing point of
antifreeze solutions in sprinkler systems to ensure adequate freeze protection.
Question 4
Per Local Law 58/2009, what color is required for sprinkler and standpipe
risers?
,3|Page
A. Red
B. Green
C. Yellow
D. Silver
Correct Answer: C. Yellow
Rationale: Per Local Law 58/2009, sprinkler and standpipe risers must be painted
yellow for easy identification by firefighters.
Question 5
What is the maximum distance from the hanger assembly to the center line of
an upright sprinkler head?
A. 1 inch
B. 2 inches
C. 3 inches
D. 4 inches
Correct Answer: C. 3 inches
Rationale: The hanger assembly must be no more than 3 inches from the center line
of an upright sprinkler head to provide proper support.
, 4|Page
Question 6
Where is the automatic ball drip located?
A. At the top of the riser
B. Between the lower check valve and the fire department connection
C. At the fire pump discharge
D. At each sprinkler head
Correct Answer: B. Between the lower check valve and the fire department
connection
Rationale: The automatic ball drip is located between the lower check valve and the
fire department connection to prevent freezing by draining water from the line.
Question 7
What is the purpose of a ball drip?
A. To increase water pressure
B. To prevent freezing in the line
C. To filter debris
D. To test the system