ANSWERS| LATEST UPDATE
The purpose of using a spotter is to
the driver by observing cross traffic the as the area in the blind spot
horizontal and vertical openings, the operator must know: To effectively judge
the ability of a vehicle to pass through areas of restricted
vehicle dimensions.
Which driving skill would not require using a spotter?
Diminishing clearance
The distance a vehicle travels from the point where you begin recognizing the
hazard until the apparatus comes to a complete stop is called the:
total stopping distance.
The confined space turnaround maneuver allows an operator to turn the
apparatus degrees
180
Improper tire pressures may cause
poor handling
, One method of performing an apparatus/pretrip inspection is the
walk-around method.
Before shutdown the apparatus engine temperature should be allowed to
stabilize by idling it for minutes.
3 to 5
Checking for voltage, electrolyte level, and corrosion are all steps in inspecting:
the battery.
While traveling in the center lane of a multiple-lane highway on an emergency
call, the vehicle in front of you stops. You should:
brake to reduce speed and pass on the left side of the vehicle.
The vacuum test requires a reading at the end of 5 minutes with no more than
inches of vacuum being lost.
10
When responding to emergencies, the use of warning devices:
does not allow the driver to disregard other drivers.
When approaching unguarded railroad crossings, the driver shall:
come to a complete stop.