CNC MILL OPERATOR TEST WITH
COMPLETE QUESTIONS AND CORRECT
ANSWERS 100% VERIFIED!!|| LATEST
UPDATE 2026
The area of the control keypad that allows the operator to show different information,
such as offsets, machine settings, and the current program. -CORRECTANSWER
offset
The area of the control keypad that allows an operator to enter letters and special
characters
into the control. -CORRECTANSWER Alpha keys
A code used to signal an action from a miscellaneous group of commands. -
CORRECTANSWER M codes
An offset used on the machining center that accounts for variations in tool length along
the Z-
axis. -CORRECTANSWER Tool offset
In zero return mode, the key that returns and initializes all axes to machine zero or
Home. -CORRECTANSWER Home 28
, The rate that the cutting tool or work piece moves at the point of contact. -
CORRECTANSWER Feed rate
The control button used to pause a program. -CORRECTANSWER Feed hold
CYCLE START -CORRECTANSWER The control button used to begin a program or
continue a program that has been
previously stopped.
FEED HOLD -CORRECTANSWER The control button used to pause a program.
LIST PROG -CORRECTANSWER An operation mode key that lists programs and
allows an operator to select, send,
receive, and delete programs.
RESET KEYS -CORRECTANSWER The area of the control keypad that executes
functions vital to the beginning and end of
a machining operation.
M09 -CORRECTANSWER An M code that turns coolant off.
M08 -CORRECTANSWER An M code that turns coolant on.
COMPLETE QUESTIONS AND CORRECT
ANSWERS 100% VERIFIED!!|| LATEST
UPDATE 2026
The area of the control keypad that allows the operator to show different information,
such as offsets, machine settings, and the current program. -CORRECTANSWER
offset
The area of the control keypad that allows an operator to enter letters and special
characters
into the control. -CORRECTANSWER Alpha keys
A code used to signal an action from a miscellaneous group of commands. -
CORRECTANSWER M codes
An offset used on the machining center that accounts for variations in tool length along
the Z-
axis. -CORRECTANSWER Tool offset
In zero return mode, the key that returns and initializes all axes to machine zero or
Home. -CORRECTANSWER Home 28
, The rate that the cutting tool or work piece moves at the point of contact. -
CORRECTANSWER Feed rate
The control button used to pause a program. -CORRECTANSWER Feed hold
CYCLE START -CORRECTANSWER The control button used to begin a program or
continue a program that has been
previously stopped.
FEED HOLD -CORRECTANSWER The control button used to pause a program.
LIST PROG -CORRECTANSWER An operation mode key that lists programs and
allows an operator to select, send,
receive, and delete programs.
RESET KEYS -CORRECTANSWER The area of the control keypad that executes
functions vital to the beginning and end of
a machining operation.
M09 -CORRECTANSWER An M code that turns coolant off.
M08 -CORRECTANSWER An M code that turns coolant on.
