LOCKSMITH EXAM / LOCKSMITH
LICENSING EXAM QUESTION AND
ANSWERS (LATEST)
When a installing a mortise cylinder in a door, in what direction
should the keyway face? - ANSWERS-12 o'clock
What is a common mortise cylinder malfunction? - ANSWERS-Loose
or missing cam screws
What is the shape of a bottom pin? - ANSWERS-Pointed on one end,
flat on the other end
When providing first aid to a victim of heat stroke, what should be
done first? - ANSWERS-Take steps to lower the person's body
temperature
When hand changing a safe combination, the locksmith should: -
ANSWERS-Use the Sargent and Greenleaf changing procedure
Panic bars are typically found: - ANSWERS-On fire exits on public
buildings
The key shown above matches locks manufactured by: - ANSWERS-
Weslock
, When performing alarm and locksmith work in Oklahoma, a licensee
must possess an Oklahoma license in the appropriate industry area
and a: - ANSWERS-Valid, state-issued photo identification
What size hole is required for a cabinet utility lock? - ANSWERS-
3/4"
Personal protective equipment should be used protect employees from
workplace hazard when: - ANSWERS-Hazards cannot be eliminated
with an engineering or workplace controls
What size hole is required for most doorknob sets? - ANSWERS-2
1/8"
Which clue indicates an electrical hazard? - ANSWERS-Warm tools
or cords
When making up a new combination number, the numbers in the
combination should be how many numbers apart? - ANSWERS-At
least 12
A technician is allowed to perform work within: - ANSWERS-The
alarm industry area(s) for which he is licensed
Upon conviction, any individual violating any provision of the
Oklahoma Alarm and Locksmith Industry Act shall be guilty of a
LICENSING EXAM QUESTION AND
ANSWERS (LATEST)
When a installing a mortise cylinder in a door, in what direction
should the keyway face? - ANSWERS-12 o'clock
What is a common mortise cylinder malfunction? - ANSWERS-Loose
or missing cam screws
What is the shape of a bottom pin? - ANSWERS-Pointed on one end,
flat on the other end
When providing first aid to a victim of heat stroke, what should be
done first? - ANSWERS-Take steps to lower the person's body
temperature
When hand changing a safe combination, the locksmith should: -
ANSWERS-Use the Sargent and Greenleaf changing procedure
Panic bars are typically found: - ANSWERS-On fire exits on public
buildings
The key shown above matches locks manufactured by: - ANSWERS-
Weslock
, When performing alarm and locksmith work in Oklahoma, a licensee
must possess an Oklahoma license in the appropriate industry area
and a: - ANSWERS-Valid, state-issued photo identification
What size hole is required for a cabinet utility lock? - ANSWERS-
3/4"
Personal protective equipment should be used protect employees from
workplace hazard when: - ANSWERS-Hazards cannot be eliminated
with an engineering or workplace controls
What size hole is required for most doorknob sets? - ANSWERS-2
1/8"
Which clue indicates an electrical hazard? - ANSWERS-Warm tools
or cords
When making up a new combination number, the numbers in the
combination should be how many numbers apart? - ANSWERS-At
least 12
A technician is allowed to perform work within: - ANSWERS-The
alarm industry area(s) for which he is licensed
Upon conviction, any individual violating any provision of the
Oklahoma Alarm and Locksmith Industry Act shall be guilty of a
