Questions with 100% Correct Answers | Verified |
Latest Update 2026
Save
Terms in this set (15)
What are the outside left and right To monitor traffic, check clearances adn students
side flat mirrors used for? on the sides and to the rear of the bus.
Blind spots below and in front of each mirror, and
directly behind the rear bumper up to 400'.
What should you be able to see if 1. 200' or 4 bus lengths behind
the outside flat mirrors are adjusted 2. Along the sides of the bus
properly? 3. The rear tires touching the ground
What should you be able to see if 1. The entire side of the bus up to the mirror
the outside convex mirrors are mounts.
adjusted? 2. Front of the rear tires touching the ground
3. At least one traffic lane on either side
What should you be able to see if 1. The front of bus from the front bumper at
the crossover mirrors are adjusted? ground level to a point where direct vision is
possible.
2. Direct vision and mirror vision should overlap.
3. The right/left front tires touching the ground
4. Area from the front of the bus to the service
door
You are loading students along the At least 200 feet or approximately 5-10 seconds
route. When should you activate before
your alternating flashing amber the school bus stop or in accordance with state
warning lights? law.