MOT LTAP EXAM REVIEW QUESTIONS WITH
ACCURATE SOLUTIONS 2026
▶ Is the shadow vehicle part of the flagging operation? Answer: Yes
▶ T/F The shadow vehicle is left in place and unoccupied when workers
are in the work zone? Answer: True
▶ What is the surface finish of the nose cone of an impact attenuator?
Answer: Solid fluorescent yellow, without stripes, Type G retroreflective
sheeting
▶ On a portable changeable message sign, what is the guidance rule for
number of phases and text the PCMS should show? Answer: Limited to 3
lines of 8 characteristics per line
▶ What type of lights are required on a vehicle with an arrow board?
Answer: High-intensity rotating, flashing, oscillating, or strobe lights
▶ What are the displays used for the "caution" operation mode on arrow
board? Answer: Shoulder work, blocking the shoulder, for roadside work
near shoulder, or for temporarily closing one lane on a two-lane, two-way
roadway, an arrow board shall be used in the caution mode (Page 689)
▶ What is required on all vehicle inside the work zone? Answer: High-
intensity rotating, flashing oscillating, or strobe lights.
▶ How long is considered long term stationary work? Answer: 3 Days
▶ On a PCMS, when a message is divided into two phases, the display
time for each phase should be at least __________ seconds and the sum
of the display times for both is a max of _________ seconds. Answer: at
least 2 seconds and a max of 8 seconds
ACCURATE SOLUTIONS 2026
▶ Is the shadow vehicle part of the flagging operation? Answer: Yes
▶ T/F The shadow vehicle is left in place and unoccupied when workers
are in the work zone? Answer: True
▶ What is the surface finish of the nose cone of an impact attenuator?
Answer: Solid fluorescent yellow, without stripes, Type G retroreflective
sheeting
▶ On a portable changeable message sign, what is the guidance rule for
number of phases and text the PCMS should show? Answer: Limited to 3
lines of 8 characteristics per line
▶ What type of lights are required on a vehicle with an arrow board?
Answer: High-intensity rotating, flashing, oscillating, or strobe lights
▶ What are the displays used for the "caution" operation mode on arrow
board? Answer: Shoulder work, blocking the shoulder, for roadside work
near shoulder, or for temporarily closing one lane on a two-lane, two-way
roadway, an arrow board shall be used in the caution mode (Page 689)
▶ What is required on all vehicle inside the work zone? Answer: High-
intensity rotating, flashing oscillating, or strobe lights.
▶ How long is considered long term stationary work? Answer: 3 Days
▶ On a PCMS, when a message is divided into two phases, the display
time for each phase should be at least __________ seconds and the sum
of the display times for both is a max of _________ seconds. Answer: at
least 2 seconds and a max of 8 seconds
