1
S13 STANDPIPE TEST 2026-
COMPREHENSIVE Q&A FOR CERTIFICATION
SUCCESS
Which option best describes a the term: Operational - correct-answer -Water
availability
An Automatic Standpipe System is - correct-answer -A standpipe system that is
attached to a water supply capable of supplying the system demand at all times
and that requires no action other than opening a hose valve to provide water at
hose connections.
Auxiliary water supply - correct-answer -supplementary source of water for a
standpipe and/or sprinkler system.
Control Valve - correct-answer -A valve controlling flow to water-based fire
protection systems. Control valves do not include hose valves, inspector's test
valves, drain valves, trim valves for dry pipe, pre-action and deluge valves, check
valves, or relief valves.
, 2
Branch line - correct-answer -A pipe system, generally in a horizontal plane,
connecting not more than
one hose connection with a standpipe.
___ is known as a Deficiency - correct-answer -A condition in which the
application of the component is not within its designed limits or specifications.
Discharge Device - correct-answer -A device designed to discharge water or foam-
water solution in a predetermined, fixed, or adjustable pattern.
What is a Dry Standpipe? - correct-answer -A standpipe system designed to have
piping contain water only when the system is being utilized (No automatic water
supply.)
____ is commonly refereed to as Dunnage - correct-answer -designing a raised
series of beams (usually steel) bearing on posts or bearing walls to support
mechanical equipment (usually on a roof
top).
Fire Department Connection - correct-answer -A connection , normally on the
exterior of the building, through which the fire department can pump
, 3
supplemental water into the sprinkler system, standpipe, or other system
furnishing water for fire extinguishment to
supplement existing water supplies. (Formerly know as Siamese connection.)
Fire Hose - correct-answer -A flexible conduit constructed with one or more
reinforcements (Jackets), with or without a coating or covering but with an
approved nonpermeable lining, or with an inner reinforcement between a
protective cover and an approved nonpermeable lining.
Fire Hydrant - correct-answer -A valve connection on a water supply system
having one or more outlets and that is used to supply hose and fire department
pumps with water.
Fire Pump - correct-answer -A pump that is a provider of liquid flow and pressure
dedicated to fire protection. A fire pump is a part of a fire standpipe system's
water supply and can be powered by electric, diesel or steam. The pump intake is
either connected to the public underground water supply piping or a static water
source (e.g., tank, reservoir, lake). The pump provides water flow at higher
pressure and volume to the standpipe system risers and hose standpipes.
A Fold is a ___ - correct-answer -A transverse bend (fold) occurring where the
hose is lengthwise double over on itself, as on a pin rack.
S13 STANDPIPE TEST 2026-
COMPREHENSIVE Q&A FOR CERTIFICATION
SUCCESS
Which option best describes a the term: Operational - correct-answer -Water
availability
An Automatic Standpipe System is - correct-answer -A standpipe system that is
attached to a water supply capable of supplying the system demand at all times
and that requires no action other than opening a hose valve to provide water at
hose connections.
Auxiliary water supply - correct-answer -supplementary source of water for a
standpipe and/or sprinkler system.
Control Valve - correct-answer -A valve controlling flow to water-based fire
protection systems. Control valves do not include hose valves, inspector's test
valves, drain valves, trim valves for dry pipe, pre-action and deluge valves, check
valves, or relief valves.
, 2
Branch line - correct-answer -A pipe system, generally in a horizontal plane,
connecting not more than
one hose connection with a standpipe.
___ is known as a Deficiency - correct-answer -A condition in which the
application of the component is not within its designed limits or specifications.
Discharge Device - correct-answer -A device designed to discharge water or foam-
water solution in a predetermined, fixed, or adjustable pattern.
What is a Dry Standpipe? - correct-answer -A standpipe system designed to have
piping contain water only when the system is being utilized (No automatic water
supply.)
____ is commonly refereed to as Dunnage - correct-answer -designing a raised
series of beams (usually steel) bearing on posts or bearing walls to support
mechanical equipment (usually on a roof
top).
Fire Department Connection - correct-answer -A connection , normally on the
exterior of the building, through which the fire department can pump
, 3
supplemental water into the sprinkler system, standpipe, or other system
furnishing water for fire extinguishment to
supplement existing water supplies. (Formerly know as Siamese connection.)
Fire Hose - correct-answer -A flexible conduit constructed with one or more
reinforcements (Jackets), with or without a coating or covering but with an
approved nonpermeable lining, or with an inner reinforcement between a
protective cover and an approved nonpermeable lining.
Fire Hydrant - correct-answer -A valve connection on a water supply system
having one or more outlets and that is used to supply hose and fire department
pumps with water.
Fire Pump - correct-answer -A pump that is a provider of liquid flow and pressure
dedicated to fire protection. A fire pump is a part of a fire standpipe system's
water supply and can be powered by electric, diesel or steam. The pump intake is
either connected to the public underground water supply piping or a static water
source (e.g., tank, reservoir, lake). The pump provides water flow at higher
pressure and volume to the standpipe system risers and hose standpipes.
A Fold is a ___ - correct-answer -A transverse bend (fold) occurring where the
hose is lengthwise double over on itself, as on a pin rack.
